Walter Ultra High Performance Solid Carbide Coolant Thru DC180- 8.73MM Drill
USD 28.00 USD
Specifications
| Brand | Walter Titex |
| End Type | Single End |
| Drill Bit Material | Solid Carbide |
| End Mill Type | Finishing End Mill |
| Overall Length | 3 in |
| Material | Solid Carbide |
| Length Of Cut | 3/4 in |
| Mill Diameter | 3/8 in |
| Shank Diameter | 3/8 in |
| Drill Bit Type | Coolant Drill Bit |
Walter Ultra High Performance Solid Carbide Coolant Thru DC180- 8.73MM Drill
Related Items
3/4 x 1/32 Inch Thin Neodymium Rare Earth Disc Magnets N52 (32 Pack)
10,000 PCS 3″ x 3″ Reclosable Resealable Clear Zipper Plastic Bags 2Mil 3×3 Inch
SycoTec High Performance HF- Spindle Motor Type : 4033 AC 100,000 RPM
1000/PCS White Block 3″x4″ Clear Reclosable Seal Bag Plastic Zip Lock Bags 4Mil
KENNAMETAL 14.5MM CARBIDE STRAIGHT FLUTE COOLANT DRILL
2 Pieces 1/8″ X 3″ ALUMINUM 6061 FLAT BAR 14″ long T6511 Extruded Mill Stock New
3/4 HP 3″ Deep Well Submersible Pump, 115V, 13 GPM, 247 ft MAX,60Hz, 1.25 in NPT
Kennameta 118596351 3/4×3/4×4 6-flute Carbide End Mill.