5V 1A USB-C TP4056 DW01A 18650 Lithium Battery Charging Charger Module 1/2/5/10x
Specifications
| Return Shipping Will Be Paid By | Seller |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Plug Type | USB-C |
| Mounting Style | Stand Alone |
| Output Voltage Rating (DC) | 4.2V |
| Minimum Operating Temperature | -10 °C (14 °F) |
| Installation Area | Indoor |
| Maximum Operating Temperature | 85 °C (185 °F) |
| Inrush Current Rating | 1 A |
| MPN | TP4056/DW01A USB-C |
| Nominal Current Rating | 1 A |
| Brand | Unbranded |
| Current Conversion | DC to DC |
Enhanced Dual Function 5V 1A 1S LiPo Battery Charger TP4056 Module With Internal DW01A Battery Protection IC With USB-C Connector This is an enhanced USB-C powered lithium-ion polymer battery backup charger that can power a load from USB-C (load is connected to Out+ and Out-) and also charge a battery (B+ and B-). It will then switch to battery power when the USB connection is removed. It uses a TP4056 charging controller with a DW01A Lithium-Ion battery protection IC to protect the battery.It provides 1A charge current and then cuts off when the battery is charged. Furthermore, when the battery voltage drops below about 2.4V, the protection IC will switch the load off to protect the cell from running at too low of a voltage - and also protects against over-voltage and reverse polarity connection. However please check you have it connected correctly the first time. An LED indicates power/charge/battery status. This module is perfect for charging single cell 3.7V 1 Ah or higher LiPo cells such as 16550s and 18650s that don't have their own protection circuit. It can charge two cells in parallel, however since the two cells share the charging current, they take twice as long to charge as a single cell.Specifications:Input: USB-C female or + and - solder terminalsInput voltage: 4.35-6V (recommended voltage 5V)Charge cut-off voltage: 4.2V + / - 1% (charges a 1S Lithium Ion Polymer Battery)Maximum charging current output: 1000mABattery overcharge protection voltage: 4.3VBattery discharge protection voltage: 2.4VBattery over-current protection current: 3ABoard size: 28mm * 17mm (1.1 * 0.67 inches), 29mm * 17mm (1.14 * 0.67 inches including the USB-C connector overhang)Indicator LEDs: Red/Green LED: Off - not connected or no power; Red - charging; Green - charge completeBlue LED: Off - no power; Blue - power onWorking temperature: -10C - +85COperation:Connect a USB-C cable for power, or 5V DC to pads marked IN+ and IN- on the left side of the moduleConnect battery cell to charge to B+/B- pads on the right side of the moduleA load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right sideImportant! Disconnect load when chargingThe red LED indicates charging in progress, green LED indicates charging is completePackage Includes:1X, 2X, 5X or 10X (1, 2, 5 or 10 pieces) 5V Enhanced 1A USB-C 18650 Lithium Battery Charging Module Package quantity selected at checkout Online documentation & usage guide
Related Items
