Harris Stay-Silv 15 Silver Brazing Rod BCuP-5 ASB-8 14 3/4 in
Harris Stay-Silv 15 Silver Brazing Rod BCuP-5 ASB-8 14 3/4 in
Wolverine Silvaloy 15 Silver Brazing Rods .050″ x 1/8″ 28 Sticks Sil-fos
All tubes will be hand counted to make sure you get 28 sticks.
10-50Pcs Nickel 99 Cast Iron Stick Electrodes Welding Rods 3/32″ 1/8″ Nickel 99%
These Nickel 99 Cast Iron Stick Electrodes Welding Rods are perfect for all your welding needs. Nickel-99 can produce high strength, ductile weld deposits even when welding low grade cast iron containing excessive levels of phosphorus or other contaminants.
10-50PCS Nickel 99 Cast Iron Repair Stick Welding Rod 3/32″ 1/8″ Nickel 99%
These Nickel 99 Cast Iron Stick Electrodes Welding Rods are perfect for all your welding needs. Nickel-99 can produce high strength, ductile weld deposits even when welding low grade cast iron containing excessive levels of phosphorus or other contaminants.
10-50x Nickel 99 Cast Iron Stick Electrodes Welding Rods 3/32″ 1/8″ Nickel 99%
These Nickel 99 Cast Iron Stick Electrodes Welding Rods are perfect for all your welding needs. Nickel-99 can produce high strength, ductile weld deposits even when welding low grade cast iron containing excessive levels of phosphorus or other contaminants.
ERNI99 3/32″ Nickel 99 1 lb Tube Welding Rods Blue Demon
ERNi-Cl (Nickel Alloy 99) is used for TIG and MIG welding of cast iron. This wire is extensively used to repair gray iron castings. It can also be used for overlay and build-up applications. Dilution from the casting influences the mechanical properties of the metal. Due to the high nickel content, the welds are readily machinable. A preheat and interpass temperature of 350ºF min. is recommended during welding. AWS Specification A5.15 AWS Classification ERNi-Cl Welding Current DCEP Typical Wire Chemistry C 0.05 Mn 0.22 Si 0.05 Ni 99.6 Typical Mechanical Properties (As Welded) Yield Strength, psi 36,000 Tensile Strength, psi 66,500 % Elongation 40 Welding Positions All positions Available Diameters MIG and suggested Operating Range in Amps .035″ 150 – 190 .045″ 180 – 220 1/16″ 200 – 250 Available Diameters TIG and suggested Operating Range in Amps .035″ 60 – 90 .045″ 80 – 110 1/16″ 90 – 130 3/32″ 120 – 175 1/8″ 150 – 220