NEW – ICM1501 OIL BURNER PRIMARY CONTROL for R8184G4066, R818G1161, R8184G1294
IGNITION OIL BURNER PRIMARY CONTROL, 15-SECOND SAFETY TIMING ICM’s Intermittent Ignition Oil Primary Control is ideal for residential oil- fired burners used in boilers, forced air furnaces, water heaters and other oil burning appliances where pre/post-purge is not a safety requirement. It uses a C554A Cadmium Sulfide (cad cell) Flame Detector to monitor the burner flame. In the event of flame failure or flame loss, the control will shut the system down. In the event of a lockout, pressing and holding in the red external reset button for three seconds will manually reset the safety switch. ( For added safety, the button press is activated upon release to ensure that the button can not be permanently held in.)A status indicator LED on the control board indicates the function of the control and can be used to aid in testing and/or troubleshooting the control. To initiate a manual lockout of the system, press and hold the reset button when the status LED is off.There is a slight delay before the heat call is implemented. This is to verify the call is valid.Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heatSolid state flame sensing circuitLED on terminal strip indicates system lockoutEnclosed safety switch with external reset buttonMounts on standard 4×4 J-Box (select models may be mounted directly on burner housing)C554A Cadmium Sulfide Flame Detector and 24 VAC thermostat requiredReplacement for popular competitive models
62-24084-01 Furnace Control Board 622408401
62-24084-01 Rheem Ruud Weather King Furnace Fan Control Circuit Board 1012-920 Opened, installed, returned.
CARRIER HK38EA013 Defrost Control Board CEPL130439-02 NEW OLD STOCK
Recently bought out an old HVAC business with tons of NOS parts. Some parts are out of their bags or the bags have been open but I do believe them to be unused. I am not an expert and have no way of testing these but will do my best to do my due diligence to provide a quality product.
Trane American Standard Defrost Control Board Fits CNT1431 CNT1642 CNT01642
Never used.
York 1157-900 Defrost Control Circuit Board 10211B SOURCE 1 used #D32A
This part wasremoved by HVAC installer from a fully functioning system. Old system was replaced with newer one (more energy efficient) and was in good working condition. This part was inspected by professional HVAC installer.
Carrier Defrost Control Board HK32EA003, CEBD430433-04B, CEPL130433-01—-“USED”
It was in working condition when removed. Condition: – Used. Warranty: – ( just DOA only ).