NanoVNA SV4401A Vector Network Analyzer 7″ Touch LCD 50KHz-4.4GHz Antenna Analyz
SV4401A 7 inch IPS Touch LCD 50KHz ~4.4GHz Vector Network Analyzer HF VHF UHF
SV4401A 7 inch IPS Touch LCD 50KHz ~4.4GHz Vector Network Analyzer HF VHF UHF Antenna Analyzer 100DB Dynamic VNA English Version Product Parameters： Name: SV4401A Vector Network Analyzer – Frequency range: 50kHz~4.4GHz – RF output power: -42dBm to -12dBm (1dB step) – RF interface form: N-type negative connector (with N to SMA adapter) – RF input power: 0dBm Max (DC<5V) – Frequency accuracy: <±1ppm (<140MHz); 140MHz) – S21 dynamic range: 75dB (3GHz) – S11 dynamic range: 50dB (3GHz) – Scan points: 1001 (can be set to 101-1001) – Scanning speed: 400 points/second (f>140MHz) – IF bandwidth: 12.5kHz by default (optional 6.25k/3.12k/1k/300Hz/100Hz/30Hz) – Smoothing: arithmetic mean (average coefficient: 1~25 times) – Number of traces: 7 (4 measurement traces, 2 reference traces, 1 TDR trace) – Number of markers: 8 – Calibration state storage number: 12 groups (supports file storage to internal memory card) – Storage capacity: Built-in 8GB memory card – Display: 7″ high-brightness IPS LCD screen (resolution: 1024×600) – Operation mode: capacitive touch + physical button – Local screenshot: support – Power consumption: 5W – Battery life: 4 hours (50% screen brightness) – Battery: two built-in 18650 lithium batteries (3.6V/3350mAh x 2) – Charging/Data Interface: USB Type-C – Charging voltage: 4.7V~5.5V (5V/2A charging recommended) – Power supply output: USB 5V/1A – Shell material: iron – Working temperature: 0℃~45℃ – Dimensions: 190 x 130 x 30mm/7.5 x 5.1 x 1.2″ (without size of RF interface) Product show:
SV4401A 7 inch IPS Touch LCD 50KHz ~4.4GHz Vector Network Analyzer HF VHF UHF
Frequency range: 50kHz~4.4GHz. – Battery: two built-in 18650 lithium batteries (3.6V/3350mAh x 2). – RF output power: -42dBm to -12dBm (1dB step). – Shell material: iron. – Operation mode: capacitive touch + physical button.
SV4401A 7 inch IPS Touch LCD 50KHz ~4.4GHz Vector Network Analyzer HF VHF j
Frequency range: 50kHz~4.4GHz. – Battery: two built-in 18650 lithium batteries (3.6V/3350mAh x 2). – RF output power: -42dBm to -12dBm (1dB step). – Shell material: iron. – Operation mode: capacitive touch + physical button.
100kHz-5.3GHz Handheld Spectrum Analyzer TinySA ULTRA 4″ Display with 32GB Card
2023 New Handheld Tiny Spectrum Analyzer TinySA ULTRA 4″ Display 100kHz to 5.3GHz with 32GB Card Version V0.4.5.1 Specification： Parameter Specification Display size 4” TFT LCD (480×320) Max low input frequency 800MHz, 6GHz in Ultra mode Resolution filters in 1,3,10 steps from 200Hz to 850kHz Max output frequency Sinus up to 800MHz, Square wave up to 4.4GHz output level -104dBm to -16dBm Ultra mode Level calibrated up to 5.3GHz Internal LNA gain 20dB up to 4GHz Displayed points per scan max 450 0-350MHz scan time 165ms Shortest zero span time 17ms DANL at 100MHz -153dBm/Hz (LNA Off) / -169dBm/Hz (LNA On) DANL degrading in ultra mode 10dB above 2.5GHz, 25dB above 5.3GHz Phase noise at 10kHz offset -92dBc/Hz Phase noise at 100kHz offset -110dBc/Hz Input 1dB compression level +0.5dBm (LNA Off) / -26.5dBm (LNA On) IIP3 without LNA +18dBm (at least 2MHz apart) / 0dBm (500Hz apart) IIP3 with LNA -8dBm (at least 2MHz apart) Frequency stability <1ppm ( -10℃ ~ +55℃) SD card slot micro SD card Audio out 3.5mm headphone plug FW update mode activation Push jog button before switch on Maximum current consumption 330mA Maximum charging current 1300mA Battery Li-polymer 3.7V 3000mAh RF connectors SMA female Communication Interface USB-CDC(Type-C)，UART-TTL(2.54mm Connector) Appearance Size 117x72x23mm (Excluding protruding parts) TinySA model comparison table： tinySA tinySA Ultra Display size 2.8 inch 4 inch Max low input frequency 350MHz 800MHz, 6GHz in Ultra mode High input range 240MHz – 960MHz Not available Resolution filters in 1,3,10 steps from 3kHz to 600kHz from 200Hz to 850kHz Max low output frequency 350MHz Sine wave up to 800MHz, Square wave up to 4.4GHz Low output level -76dBm to -7dBm -104dBm to -16dBm High output frequency range 240MHz – 960MHz Not available High output level -32dBm to 16dBm Not available Ultra mode Not available Level calibrated up to 6GHz Internal LNA gain Not available 20dB up to 4GHz Internal step attenuator Normal: 0-31dB, High: NA 0-31dN Displayed points per scan max 290 max 450 0-350MHz scan time 405ms 165ms Shortest zero span time 1.8ms 17ms DANL low input at 100MHz -146dBm/Hz -153dBm/Hz (LNA Off) / -169dBm/Hz (LNA On) DANL high input at 880MHz -163dBm/Hz Not available DANL degrading in ultra mode 10dB above 2.5GHz, 25dB above 5.3GHz Phase noise at 10kHz offset -83dBc/Hz -92dBc/Hz Phase noise at 100kHz offset -98dBc/Hz -108dBc/Hz Low input 1dB compression level -0.5dBm +0.5dBm (LNA Off) / -26.5dBm (LNA On) IIP3 without LNA +24dBm +18dBm (at least 2MHz apart) / 0dBm (500Hz apart) IIP3 with LNA Not available -8dBm (at least 2MHz apart) SD card slot Not available micro SD card Audio out Not available 3.5mm headphone plug FW update mode activation Via DFU menu Push jog button before switch on AM modulation depth Fixed 30% 10% and 100% FM deviation 4kHz or 75kHz 1kHz to 300kHz Modulation frequency 50Hz to 5kHz 50Hz to 5kHz(AM) or 1kHz(FM) Package includes: Host (with 3000mAh battery, 4"display) x 1 USB Type-C data cable x1 30cm ALSR100 SMA cables x2 SMA-SMA barrel connector x1 Antenna with SMA connector x1 Lanyard and touch plectrum x1 32GB MicroSD card(plugged in the host) x1
Western Electric 656B IC AMPL Western Electric AVG GAIN15.5 DB Waveguide
Free eBay listing template designed by dewiso.com Free eBay listing template designed by dewiso.com Western Electric 656B IC AMPL Western Electric AVG GAIN15.5 DB Waveguide Microwave Misc Elements DESCRIPTION: Western Electric 656B IC AMPL Western Electric AVG GAIN15.5 DB Waveguide Stocks#XZ9 + XZ10N-Q-2 RETURNSWe offer a 14 day ROR on all units. We also guarantee that the unit is in good working condition and provide a 30 day warranty!SHIPPINGWe offer fast domestic and international Shipping. Shipping using the customer’s fedex, ups, or dhl account is available upon request. Overseas customers please consider freight / customs charges before bidding. Lead time for most units is usually between 1-3 business days.PAYMENTSWe accept PayPal, Credit Cards, and Wire Transfers.