5/8″ (7/8×14) Male SAE ORB x 1/2″ Male NPTF Straight Adapter 6401-10-08
FACTORY NEW! Dixon 1020808C Brass 1/2″ Hose ID x 1/2″ Male NPTF Barb Fitting
WE SELL ONLY BRAND NEW FACTORY INVENTORY!SHIPS THE SAME BUSINESS DAY! 1020808C Male NPTF x Hose Barb Fitting1/2″ ID Hose Barb1/2″NPT ThreadBrass Construction UseAll standard hose fittings are intended for use with hose clamps or crimped ferrules. SpecificationsNumber of Barbs: 4Barb Length: 1.19″ Construction360 CDA Brass Performance: • Working pressure: 250 PSI maximum @ 72°F (1 except 103 and 105 series rated to 120 PSI maximum) • Operating temperature range: -40°F to +160°F at 150 PSI maximum • Vacuum: not rated Safety NotesWARNING This product can expose you to chemicals, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. enlarge Part Number1020808C (BN44)MaterialBrassMale ThreadNPTFMale Thread Size1/2″Hose ID1/2″Hex7/8″Length1.97″Weight OZ1.75 OZ Industrial Powermation, Inc All of our products are brand NEW factory stock. WE SHIP ITEMS THE SAME BUSINESS DAY. We can ship items UPS Next Day Air or FedEx Express Air. Items are shipped from Miami, FL. Items are shipped through one of three carriers (USPS, UPS or FedEx depending on the weight and your location. Delivery dates are estimates provided to us by our carriers (UPS, FedEx, USPS) and they may vary. Shipping charges include; postage, handling and tracking. We ship to All US states: PO Boxes, Alaska, Hawaii, Puerto Rico, APO and PPO. For discounted shipping on multiple items, please send us a message through eBay. Please be sure to leave us 5 stars for shipping.Our Policy Is 100% Customer Satisfaction. Please Contact Us If You Are Not Completely Satisfied With Your Purchase. We Will Do Whatever it Takes to Make Sure That You Are 100% Satisfied.
1040808C (BF44) Dixon Valve 1/2″ Hose ID x 1/2″ FEMALE NPTF Brass Barb Fitting
WE SELL ONLY BRAND NEW FACTORY INVENTORY!SHIPS THE SAME BUSINESS DAY! 1040808C FEMALE NPTF x Hose Barb FittingBF44 OLD Dixon Part Number1/2″ ID Hose Barb1/2″NPT ThreadBrass Construction UseAll standard hose fittings are intended for use with hose clamps or crimped ferrules. SpecificationsNumber of Barbs: 4Barb Length: 0.97″ Construction360 CDA Brass Performance: • Working pressure: 250 PSI maximum @ 72°F (1 except 103 and 105 series rated to 120 PSI maximum) • Operating temperature range: -40°F to +160°F at 150 PSI maximum • Vacuum: not rated Safety NotesWARNING This product can expose you to chemicals, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. enlarge Part NumberBF44 (1040808C)MaterialBrassFemale ThreadNPTFMale Thread Size1/2″Hose ID1/2″Hex15/16″Length1.66″Weight Oz2.00 Industrial Powermation, Inc All of our products are brand NEW factory stock. WE SHIP ITEMS THE SAME BUSINESS DAY. We can ship items UPS Next Day Air or FedEx Express Air. Items are shipped from Miami, FL. Items are shipped through one of three carriers (USPS, UPS or FedEx depending on the weight and your location. Delivery dates are estimates provided to us by our carriers (UPS, FedEx, USPS) and they may vary. Shipping charges include; postage, handling and tracking. We ship to All US states: PO Boxes, Alaska, Hawaii, Puerto Rico, APO and PPO. For discounted shipping on multiple items, please send us a message through eBay. Please be sure to leave us 5 stars for shipping.Our Policy Is 100% Customer Satisfaction. Please Contact Us If You Are Not Completely Satisfied With Your Purchase. We Will Do Whatever it Takes to Make Sure That You Are 100% Satisfied.
1/2″ Hose ID x 1/2 Male NPTF 90° Brass Elbow 1290808C Dixon Valve FACTORY NEW!
1290808C 90° Brass ElbowFitting. EL4H4M OLD Dixon Part Number. 1/2″ ID Hose Barb. Brass Construction. 360 CDA Brass. Material(s): Brass. Safety Notes. Shape (Orientation): 90 Degree.
CA-12 Load Genie Brass Air Compressor 1/2″ x 3/8″ Self Unloading Check Valve New
3/8″ MNPT x 1/2″ compression CA-12 Load Genie self unloading check valve for air compressors. As the compressor discharge pressure increases the flow capacity decreases. This check valve / unloader can be used in a wide variety of applications. This valve features 3/8″ male NPT threads to connect to your tank as well as 1/2″ male compression threads for the inlet. When installing this part it is important to be careful with how much you tighten it and where. When installing this check valve into the tank of your air compressor, make sure that you tighten the bottom part of the valve (as shown in the photos above). YOUR COMPRESSOR, COMPRESSOR PARTS, & ACCESSORY SUPERSTORE! Home All Products Contact Us Returns About Us MENU Store Pages Home All Products Contact Us Returns About Us Store Categories 1/2″ RapidAir Maxline 3/4″ RapidAir Maxline 3/8″ RapidAir Garage Piping Accessories Air Compressor Oil Air Compressor Pumps Air Compressors Air Hoses Air Tank Manifolds Belts Blow Guns & Tire Inflators Check Valves Compressor Rebuilt Kits Couplers & Fittings Electric Motors Gauges Hose Reels Intake Filters Magnetic Starters Pressure Switches Pulleys A Section Regulators, Filters, & Oilers Relief Valves Tank Moisture Drains Throttle Cont Cables & Valves Tire Inflators Unloader Valves Vibration Pads Other GREAT SELECTION OF PRODUCTS/ FAST SHIPPING/ FREE SHIPPING ON MOST ITEMS/ PRODUCT KNOWLEDGE & SUPPORT Store Categories 1/2″ RapidAir Maxline 3/4″ RapidAir Maxline 3/8″ RapidAir Garage Piping Accessories Air Compressor Oil Air Compressor Pumps Air Compressors Air Hoses Air Tank Manifolds Belts Blow Guns & Tire Inflators Check Valves Compressor Rebuilt Kits Couplers & Fittings Electric Motors Gauges Hose Reels Intake Filters Magnetic Starters Pressure Switches Pulleys A Section Regulators, Filters, & Oilers Relief Valves Tank Moisture Drains Throttle Cont Cables & Valves Tire Inflators Unloader Valves Vibration Pads Other Store Newsletter Add our store to your Favorites to receive our email newsletters about new items & special promotions. General Interest SIGN UP CA-12 Load Genie Brass Air Compressor 1/2″ x 3/8″ Self Unloading Check Valve New Product Description Brand new 3/8″ MNPT x 1/2″ compression CA-12 Load Genie self unloading check valve for air compressors. As the compressor discharge pressure increases the flow capacity decreases. This check valve / unloader can be used in a wide variety of applications. This valve features 3/8″ male NPT threads to connect to your tank as well as 1/2″ male compression threads for the inlet. When installing this part it is important to be careful with how much you tighten it and where. When installing this check valve into the tank of your air compressor, make sure that you tighten the bottom part of the valve (as shown in the photos above). It is important to make sure that you have a good seal; however, over tightening this valve can bend the internal parts and ruin the valve. Make sure that you do NOT overtighten this valve during install. Specifications: • Load Genie• Part Number: CA-12• 1/2″ Compression Inlet• 3/8″ MNPT Outlet (To Tank)• Valve Length: 1-5/8″• Brass• Stainless Steel Spring• 250 PSI Max Pressure• Max temperature: 450° F• Check Valve / Unloader (California Residents Warning: This product contains or may contain chemicals including lead known in the state of California to cause cancer, birth defects, or other reproductive harm. We suggest washing hands after handling. California law requires this warning be given to all customers in the state of California. (California Health and Safety Code 25249.5 et seq.) Return Policy Return Policy We accept returns within 30 days of purchase. A 20% restocking fee applies on all items returned for a refund. If you receive a manufacture defective item and want to exchange it there is no restocking fee. No refunds will be given on items that have been opened or used and will be exchange only. Anything being returned must include all original parts sent or fees will apply. Buyer is responsible for return shipping costs to us. We will pay to ship the item replacement back to you. All returns need to have a note included with the buyers information and reason for return or exchange. Shipping Shipping At Compressor Source we are dedicated to our service for you! We ship all items within 24 hours of payment Monday-Friday. We are closed on weekends and holidays. Most all items ordered Tuesday-Friday by 12:00pm Central Time, will ship the same day. If for any reason there is an issue with your order we will contact you right away. If you are in need of expedited shipping, please contact us via ebay messaging system. Contact Contact For any questions you may have about your purchase, or any of our products feel free to message us via the eBay message system and we will respond within 24 hours Monday-Friday Payment Payment All Payments are made through PayPal. If you have any questions feel free to Message us via the eBay message system at any time. Feedback Feedback At Compressor Source we strive for great customer service and to sell the best quality parts at the lowest prices possible. We leave feedback for all purchases. If for any reason you are not satisfied with your purchase or have any issues, please contact us first via the eBay message system. We would love to have the opportunity to earn your positive feedback and look forward to your future business. Home All Products Contact Us Returns About Us Copyright © 2017 Compressor-Source. All rights reserved. eBay Template Design by OCDesignsOnline