3-1/4″ Diameter X 12″ Length 4140 HOT ROLLED ANNEALED ALLOY STEEL BAR
For Sale: 4140 Hot Rolled Annealed Round Bar 1 Piece 3-1/4″ Diameter X 12″ Length Length is Saw Cut +1/8″ -.000 Approx weight is 28 lbs. The picture does not necessarily represent the item that you will get but they are similar. NOTE; As Surface Condition on Outside Diameter is Hot Rolled it is NOT ADVISABLE TO TRY TO FINISH MACHINE ON SIZE FROM SIZE PURCHASED. Standard Machining Allowance must be removed off the Hot Rolled Surface Condition to be free from decarborization, seams, laps, tears or cracks and other defects exposed to the machined surfaces. AISI/SAE 4140 is a medium Carbon content Chromium Molybdenum based Alloy Steel and after machining can be Heat Treated.Typical Analysis; Carbon .38% -.43%, Manganese 0.75-1.00%, Chromium .80%-1.10%, Molybdenum .15%-.25% Typical applications include; Spindles, Rods, Shafts, Studs, Axles, Arbors, Gears, Machine Parts, Inexpensive Tooling, Short Run Stamping Dies. Note; We do not ship via US Mail / We don’t ship to a PO Box. We Will Ship Via UPS Up To 70 Pounds Max Weight Per Package. – If you need to order over 70 Pounds then send us a message so we can then provide you with best Pre-Paid Freight Shipping Cost and most practical way to ship. *** Also available in a full range of other Sizes & Surface Conditions Including; CF Annealed, HR Heat Treated & TGP Heat Treated.*** Low prices on all grades of precision ground stock; O-1, A-2, D-2, S-7, 4142PH, A-6, M-2, Low Carbon & other grades. All available as standard or oversize. Flat ground stock produced up to 120″ long. NESSteel Inc. “The One Stop Steel Shop” For all your steel and metal requirements No minimum order, great prices. Stocking – Tool, Carbon, Mold, Alloy and High Speed Steels. All sizes of 1018 cold finished bar. Flat ground stock in all grades – Standard & Special Sizes In house Blanchard Grinding to 60″ and Surface grinding to 120″ Paypal and all credit cards accepted.
1-3/4″ Diameter X 12″ 4140 Cold Finished Annealed Alloy Steel Bar
Typical Analysis; Carbon. 38% -.43%, Manganese 0.75-1.00%, Chromium. 80%-1.10%, Molybdenum. 15%-.25% Typical applications include; Spindles, Rods, Shafts, Studs, Axles, Arbors, Gears, Machine Parts, Inexpensive Tooling, Short Run Stamping Dies.
1.687 (1-11/16 inch) x 12 inches, 416 Stainless Steel Round Rod, Cold Finished,
416 Stainless Steel alloy is a free-machining version of the 410 alloy. It is a heat-treatable stainless used where corrosion is not severe, but high strength and mild corrosion resistance is required. Chrome Alloy, Martensitic (Magnetic).
1.375 (1-3/8 inch) x 12 inches, 8620 Alloy Steel Round Rod, Cold Finished, Bar S
8620 Alloy Steel Round Bar is a low carbon, nickel, chromium, molybdenum alloy. The nickel content contributes to case toughness and core toughness, while the chromium and molybdenum support carburizing, to give good surface hardness and wear. M
0.937 (15/16 inch) x 12 inches, 4140 Alloy Steel Round Rod, Cold Finished, Bar S
4140 is a widely used medium carbon steel containing chromium and molybdenum, it commonly known as “chromoly”. A general purpose alloy, offering the right combination of strength, toughness and hardness with good machinability.
3″ HEX x 12″ Length 1018 Cold Finished Carbon Steel Bar
1018 Cold Finished Steel Bar, 1 Piece 3″ Hexagon X 12″ Long Length is Saw Cut +1/8″ -.000 The picture does not necessarily represent the item that you will get but they are similar. Approx weight is 27 lbs. 1018 Bar–1018 is the most commonly used steel. The steel has fair machinability and is easy to weld. Good for applications that do not require high strength. Meets ASTM A108. Used for bolts, machine parts, structural parts, gears, cams, worms and pinions. NOTE; We don’t ship via U.S. Mail. / We don’t ship to a PO BOX. We Will Ship Via UPS Up To 70 Pounds Max Weight Per Package. – If you need to order over 70 Pounds then send us a message so we can then provide you with best Pre-Paid Freight Shipping Cost and most practical way to ship. *** Also available in a full range of other sizes and lengths including Inch and METRIC sizes.*** Low prices on all grades of precision ground stock. O-1, A-2, D-2, S-7, 4142PH, A-6, M-2, Low Carbon and other grades. All available as standard or oversize. Flat ground stock up to 120″ long. NESSteel Inc. “The One Stop Steel Shop” For all your steel and metal requirements No minimum order, great prices. Stocking – Tool, Carbon, Mold, Alloy and High Speed Steels. All sizes of 1018 Cold Finished Bar. Flat ground stock in all grades – Standard & Special Sizes In house Blanchard Grinding to 60″ and Surface grinding to 120″ Paypal and all credit cards accepted.