2” X 6″ Long Aluminum Round Rod Solid 6061-T6 2.0” Bar Stock
This item is (1) pieces of 2″ X 6″ Long Aluminum Round Rod 6061-T6 Custom sizes available. Contact for more information.
6061 T6 2″ x 2″ x 1/4″ Structural Aluminum Angle Custom Cut to your Specs.
If you need 37” order quantity of 4, in notes specify 37”. If you need 35” order quantity of 3, in notes specify 35”. -Cut to specification. Buy it now quantity of (1) = 1 Foot Piece.
2 Pieces 2″ X 4″ ALUMINUM 6061 T6511 SOLID FLAT BAR 6″ long Extruded Mill Stock
You are buying 2 pieces of 2″ X 4″ 6061 T6511 Aluminum solid extruded bar 6″ long +.07″/-0″ a total of 12″.
DANLY SPRING 9-3232-36 EXTRA HEAVY DUTY SPRING 2.000″ x 8.00″ YELLOW
EACH ITEM WILL BE IN A SIMILAR CONDITION AS THE ONE IN THE PHOTO.
Teflon 3/16 x 2 x 12″ ( .187 x 2.000 x 12.000) INV#X-86
Teflon 3/16″ Thick x 2″ Wide x 12″ long (.187 x 2.000 x 12.000).
2 in 2.000 Shell Reamer Arbor adapter Morse taper 5 shank MT5 5MT 2 inch 2in cut
Super sharp still coated in plastic ready to use, this is a resharpened cutter that has not been used since it was last sharpened. Fast free shipping Extra Length deep pocket reamSpiral Flute shell reaming cutter and arbor size number 8?The cutter is made by Morse USA the arbor is also USA but I do not see the name Shank is Morse taper #5Overall length is 18.125″ Flute Length is 2.5″The end where your reamer slides on starts out at about .956″ diameter and tapers up above that as the back end of the taper. You can of course use several other reamer sizes with this arbor.Condition ………….. The cutter is nice and SUPER sharp and the holder is in good shape. I did not take the time to take the plastic off when I did the photos so for right now so you can see what it looks like I have attached some additional photos. The last 3 photos areStock photos of one of my other shell reamers but I am working on getting actual photos of the flutes without plastic on them. Spiral Fluted hs hss high speed steel cutting bit