Kingsley Evans Logo

Item Tag: 200 A

Eaton BRP12L200R Main Lug BR Loadcenter 200A 120/240V 1PH3W N3R -E3166 NEW-B

THIS LISTING IS FOR ONE:CUTLER HAMMER EATON BRP12L200R LOADCENTER200 AMP MAIN LUG200 AMP, 120/240 VOLT, 1 PHASE, 3 WIREPLUG ON NEUTRALALUMINUM BUS, 12/24 CIRCUITNEMA 3R ENCLOSURE- OUTDOOR RATEDSURFACE COVER, APPROX DIMS 14.5 X 5.5 X 19STOCK # E3166 NEW IN BOX STOCK PICTURE MAY VARY FROM THE ACTUAL ITEM SHIPPED Terms and Conditions Product Conditions: New: The product is a new, unused item in its original factory packaging and is subject to a 1-year warranty. New / Unused Surplus: The product is a new, unused item that may or may not have its original packaging. The item has never been put into service and is subject to a 1-year warranty. New Take Out: The product is a new, unused item that may have been previously installed in electrical equipment but has never been energized. Seller Refurbished or Reconditioned: The product is inspected, cleaned, and repaired, found to be free of damage, fully functional, Electrically OK, Mechanically OK, and the labels are intact or replaced. The item may also be painted, relabeled, and have new parts installed as necessary. Equipment is tested for proper insulation resistance, contact resistance, operation, and performance. All reconditioned equipment meets performance, operation, and safety standards dictated by the OEM. PEARL or NETA (National Electrical Testing Association) performance standards will be used if OEM standards are not readily available to the public. Our certified technicians follow OEM, NETA, and PEARL reconditioning and performance standards to ensure that reconditioned equipment will perform as expected and meet or exceed its expected lifetime. Used: An item that has been used previously. The item may have some signs of cosmetic wear but is fully operational and functions as intended. This item may be a floor model or store return that has been used. As-Is and For Parts or Not Working: The product is shipped as pictured. The Item may or may not function as intended and is not fully operational. This includes items that are defective in ways that render them difficult to use, items that require service or repair, or items missing essential components. Warranty: One-Year Warranty – All New, Reconditioned, and Tested with Test Report Items Warranty will extend for 1 year from the date the item is shipped, during which time the product will operate satisfactorily under nameplate rated load and normal usage and conditions, after proper installation. 90 Day Warranty – All Used Items Warranty will extend for 90 days from the date the item is shipped, during which time the product will operate satisfactorily under nameplate rated load and normal usage and conditions, after proper installation. No Warranty- All As-Is and For Parts or Not Working Items All As-Is and For parts or Not Working Items do not include a warranty. The Electric Barn will not accept returns for these items. Note: Should the product fail during the warranty period, the buyer shall return the product to the seller, at the buyer’s expense, for inspection and verification of the warranty claim. Should the warranty claim be deemed valid, The Electric Barn will replace the item with equal value or refund the buyer the full purchase price of the product. If the product is repaired or replaced under warranty, the new warranty period will extend for 90 days from the shipping date of the repaired or replaced product. Altering, tampering with, or the removal of electrical labels voids all warranties. No Refunds on Labor. Note to Our Valued Customers and eBay Feedback: We sell and ship 100’s of items a day and complete a 3-point inspection process to verify correct and operational items are shipped. If you receive a damaged or incorrect item, please contact us immediately to handle any issue with your order. By contacting us directly, we will be able to expedite a replacement or refund as we value our customers and customer ratings on eBay. Manufacturer Disclaimer: The Electric Barn is not an authorized distributor for any of the manufacturers listed on our website. All product names, logos, and brands are the property of their respective owners.

BR200 Generator Interlock Kit Eaton / Cutler Hammer or Challenger 150 & 200A BR

Proudly made in the USA! Generator Parts manufactures a high quality line of generator breaker interlock kits. These interlocks are made of 6061T-6 aluminum and are sand blasted and then anodized. They look professional and they make the installer look professional. There are no sharp edges or plastic components on the assembly like you find on similar kits. The BR-200 Interlock Kit fits Cutler Hammer (Eaton) BR Series, BR Series with plug-on neutral, and CH Series with plug-on neutral, both 150 and 200 amp panels that have a horizontal throw single main breaker and 1 1/4 ” to 1 1/2″ spacing between the closest edge of the main breaker cut-out and the closest edge of the generator breaker panel cut-out. Please see the attached photos. The main breaker can be located at the top or bottom of the panel. The area surrounding the main breaker on the panel cover MUST be RAISED or FLAT, as shown in the photos. If you have a DEPRESSED area surrounding the main breaker, you need an NCH-200 Interlock Kit instead. This interlock kit meets the requirements of Article 702 of the National Electric Code ANSI/NFPA 70. NEVER back feed a breaker panel without a generator breaker interlock kit. Doing so could easily energize utility lines with very high voltages that could easily be lethal to a lineman or other utility worker. Be safe and do the right thing. These quality kits are money well spent. The kits include: Anodized aluminum generator breaker interlock assembly Clear and simple installation instructions A high quality 3/16″ drill bit Name brand thread lock compound Generator breaker retaining strap Vinyl weatherproof complete label set Once you purchase an interlock kit from Generator Parts you won’t ever want to purchase any other brand.

NIB – Siemens – QN2200RH – Molded Case Circuit Breaker – 200A, 1-Phase, 240V

NIB – Siemens – QN2200RH – Siemens 200A Main Residential Circuit Breaker Siemens Low Voltage Residential Circuit Breakers offer circuit protection for load center mains, feeders, and miniature circuit breakers. The QNRH type is suitable for electrical distribution with a voltage rating of 120/240V and an amperage rating of 200A. Application: Electrical Distribution Standard: UL 489 Voltage Rating: 120/240V Amperage Rating: 200A Trip Range: Thermal Magnetic Interrupt Rating: 22 AIC Number Of Poles: 2P LiveWire Electrical Supply has been serving electrical distributors across the United States since 2005. With thousands of items in stock and ready to ship. LiveWire is the trusted need-it-now power distribution partner for leading electrical distributors for new-in-box circuit breakers, fittings, fuses, motor control and switchgear. We stock a $60+ million inventory of new-in-box, products across Square-D, Eaton, GE, Siemens, Allen-Bradley, Crouse-Hinds, Appleton, Bussmann, Hammond Power, and ACME. Through our core values of Customer First, Integrity, and Commitment to Premium Vendor Relationships, LWES is committed to your success.

NIB – Eaton – A200M1CAC – Non-Reversing Starter For Motor Control

NIB – Eaton – A200M1CAC – Non-Reversing Starter For Motor Control **Eaton’s Freedom NEMA motor control starter (A200 series) is a non-reversing starter designed for separate control. It operates at coil voltages of 120V/60 Hz or 110V/50 Hz, with an amperage rating of 27A.** Catalog Number: A200M1CAC Coil Voltage: 120V/60 Hz or 110V/50 Hz Amperage Rating: 27A Poles: Three-pole Size: 1 Horsepower Rating: 2 hp at 115V 7-1/2 hp at 208,240V 10 hp at 480,600V Series: A200 Wiring: Wired for separate control LiveWire Electrical Supply has been serving electrical distributors across the United States since 2005. With thousands of items in stock and ready to ship. LiveWire is the trusted need-it-now power distribution partner for leading electrical distributors for new-in-box circuit breakers, fittings, fuses, motor control and switchgear. We stock a $10+ million inventory of new-in-box, products across Square-D, Eaton, GE, Siemens, Allen-Bradley, Crouse-Hinds, Appleton, Bussmann, Hammond Power, and ACME. Through our core values of Customer First, Integrity, and Commitment to Premium Vendor Relationships, LWES is committed to your success.