Wheel set for knife making 2″ x 72″ Belt Grinder (MADE IN USA) Fast Shipping
BEWARE OF CHINESE/TURKISH/POLISH JUNK SPLATTERED ALL OVER EBAY, ASK US WHO THEY ARE IF YOU’RE UNSURE. THEY USE TERRIBLE MATERIALS & BEARINGS! NICE PICS, BAD WHEELS! WE SELL GENUINE DIKTATOR WHEELS, BUY WITH CONFIDENCE! In this set:* ONE crowned tracking wheel. The tracking wheel is 3″ in diameter and 2.25″ wide. The 3 bearings are removable so that they can be replaced when they wear out. The bearings have a 1/2″ bore. This wheel is crowned, it does not have a sharp v. WE INCLUDE A 3/8″ WIDE STANDOFF* TWO idler wheels. 2″ diameter and 2.25″ wide. The 3 bearings are included and have a 1/2″ bore. WE INCLUDE 2X 3/8″ WIDE STANDOFFS. * ONE crowned drive wheel. The drive wheel measures 4″ in diameter and 2.25″ in width. It has a 5/8″ bore with a 3/16″ keyway cut into it. 1/4-20 x 1/2″ set screw is included. DISHED SIDE FACE. IF YOU NEED A DRIVE WHEEL WITH A 3/4″, 19MM, 7/8″ OR 24MM BORE PLEASE LEAVE A MESSAGE ON THE CHECKOUT PAGE & WE’LL SEND THAT OUT.Thanks for looking!