Rear Lowering Shocks 2″ – 4″ Drop Fit For Chevy Silverado/GMC Sierra 99-06
Introduction: When you lowered your vehicle with shortened coil springs, the stock shocks will not be valved correctly and will sit too far down in their “stroke” to work as intended and will blow out more quickly. So you will need drop/lowering shocks. They are designed to lowered vehicled and provide ride improvement and travel required. Application: Fit For Chevy Silverado/GMC Sierra 99-06 Specification: Product type: Lowering shock Drop height: 2”-4” Material: High Tensile Strength Carbon Steel Finish: Powder coated Bushing material:Rubber Diameter of piston rod:12.5mm/ 0.49inch Piston diameter:30mm/ 1.18inch .
Sandbaggy Plastic Rebar Chair – Elevates Rebar 1 ½” or 2″ – Rebar #3 to #5 (Red)
Trust Sandbaggy Rebar Chairs: Over 1 Million Sold! With over 1 million sold, you can trust Sandbaggy Plastic Rebar Chairs to secure your rebar in place when pouring concrete. These rebar chairs, also known as rebar stands, are extremely versatile. They’re compatible with rebar sizes #3 to #5, can elevate your rebar either 1 1/2 inch or 2 inches off the ground, and hold up to 2 rebar bars at a time.These rebar chairs are so strong, you can step on them and they won’t break! This heavy duty rebar chair is made with a wider base than our older design for added stability. It is made from an industrial grade polypropylene, so it never rusts or corrodes in concrete. Order these plastic rebar chairs wholesale as low as $0.39 each.SpecsHeight (Inches): 3 inch.Length (Inches): 4.5 inch.Rebar Elevation (Inches):Bottom Notch: 1.5″Top Notch: 2″Color: RedMaterial: PolypropyleneNumber of Rebars Held: 2Rebar Size: #3, #4, #5Weight (lbs.): 1 oz.FeaturesSnap & Lock Feature: No more wire tying. Set-up rebar with ease with our snap and lock design that installs the rebar in seconds! Provides Structural Support: Holds your rebar at the correct (desired) depth within the concrete, which is important for the overall strength and stability of the structure. Won’t Tip Over When Pouring Concrete! We’ve constructed these plastic rebar chairs with an extra wide and uniquely designed base for added stability when concrete is being poured on top of your rebar. Dual Height – Elevates Rebar 1.5″ or 2″ Off The Ground: Can be used as either 1 ½” rebar chairs (insert rebar into the lower notch) or 2″ rebar chairs (insert rebar into the top notch). Extremely Heavy Duty: Designed so you can step on them without breaking! We’ve constructed our rebar chairs using extra thick plastic. These chairs are made from industrial grade polypropylene. Rebar Sizes: Compatible with rebar sizes #3, #4, and #5. Can hold up to 2 rebar each.Holds 2 Rebar Bars: Each chair securely supports two rebar bars, saving you time and materials compared to using single-rebar chairs. Upper notch elevates rebar 2″, lower notch elevates rebar 1.5″ off the ground.FAQPlastic vs Metal Rebar ChairsMetal Rebar Chairs are stronger, while plastic rebar chairs are easier to install, more economical, and are corrosion resistant. Choosing between them will depend on project requirements.Are rebar chairs necessary?Rebar chairs keep rebar in place during construction, as well as provide more stability and proper concrete flow when concrete is poured in. Rebar chairs enhance the support and stability of the concrete structure.Do you leave rebar chairs in concrete?Yes, Rebar Chairs are left inside the concrete to help support the rebar.What is a rebar chair for?Rebar chairs are rebar support products used to secure and hold rebar (reinforcing steel bars) in place as concrete is being poured. They come in many shapes and sizes. They are commonly used in:Foundations: slabs, footings, and wallsBridges: bridge decks and piersBuildings: columns, beams, and wallsRetaining wallsRoads and highwaysRebar Spacing – How many rebars chairs do I need?The amount of rebar chairs needed will depend on the project. As a best practice, place them about 2 to 3 feet apart along the length of the rebar. Revolutionizing Construction: Unleashing the Power of Plastic Rebar Chairs Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo]
50-Pack 1/2″ x 4-1/2″-inch Zinc Wedge Expansion Concrete Anchor Bolts
Titan Anchors’ 1/2″ x 4-1/2″ Zinc Wedge Concrete Anchor Bolts are engineered for maximum holding power in solid concrete applications. Ideal for heavy-duty construction, machinery anchoring, and structural fastening, these anchors provide dependable performance under demanding conditions.
25-Pack 1/2″ x 4-1/2″-inch Zinc Wedge Expansion Concrete Anchor Bolts
Titan Anchors’ 1/2″ x 4-1/2″ Zinc Wedge Concrete Anchor Bolts are engineered for maximum holding power in solid concrete applications. Ideal for heavy-duty construction, machinery anchoring, and structural fastening, these anchors provide dependable performance under demanding conditions.
Mean Well EDR-120-24 AC/DC Industrial DIN rail power supply – Output 24V at 5…
Image is Representational – See Manufacturer Specs |� AC/DC Industrial DIN rail power supply – Output 24V at 5A – 120W – metal case. EDR-120-24 is AC/DC Industrial DIN rail power supply with output voltage 24VDC at 5A. Economical and slim the EDR range of power supplies can be installed on TS-35/7.5 or TS-35/15 mounting rails and have been designed to allow space saving within cabinets. The entire series conforms to EN61000-3-2 and has been designed with metal housing enhancing the PSUs power dissipation. The entire series can operate between -20�C and 60�C under air convection. The EDR series is an ideal choice for many ind