Utility Grade Filament Strapping Tape 3/4 in. x 60 yds Lot of 12
The Utility Grade Filament Strapping Tape is a high-quality adhesive tape designed for various industrial and commercial applications. With a width of 3/4 inch and a length of 60 yards, this lot of 12 white tapes by Intertape Polymer Group Inc is durable and reliable for wrapping and securing items. Made in the United States, the Intertape RG300 model ensures strong adhesion and long-lasting performance for your packaging needs.
Intertape 534 Flatback Paper Packaging Tape: 2 in. x 60 yds. (Brown)
534 MEDIUM GRADE FLATBACK TAPE DESCRIPTION: Considered by many as the “Industry Standard”, 534 is an aggressive pressure-sensitive flatback tape that has been specifically designed to offer a strong secure seal on a variety of substrates. This product is moisture resistant and performs well under a wide range of temperature and humidity conditions. 534 has an excellent balance between machine and cross direction tensile and tear strength in order to reduce failures in the field, specifically in medium duty splicing, tabbing and core starting applications. This product is not repulpable. PRODUCT APPLICATIONS: Carton sealing, packaging, silk screening, picture framing, beaming/leasing, splicing, and tabbing GOVERNMENT COMPLIANCE Approved as packaging tape by both U.S. Postal Service and U.P.S (United Parcel Service). PPP-T-42C, Type II C.I.D. A-A-883B, Type II PropertiesThickness: 7.5 mils (carrier, adhesive). Adhesion: 60 ounces per inch (to stainless steel test panel). Tensile Strength: 42 pounds per inch (longitudinal). Elongation: 7%. Core: 3-inch diameter.
FrogTape Delicate Surface Painters Tape: 0.94 in. x 60 yds. (Yellow)
Product HighlightsFrogTape Delicate Surface Painters Tape is a low-adhesion painters tape designed for use on freshly painted surfaces (24 hours old), faux finishes, primed wallboard and sheetrock, wallpaper, finished wood (polyurethane, stain), and veneer, laminate, and vinyl surfaces. It will remove cleanly from most surfaces for up to 60 days. It is recommended to test the FrogTape Delicate Surface product before use on all surfaces including those with texture.When applying FrogTape Delicate Surface Painters Tape make sure the surface is clean, dry and free from dust. If the surface has been recently painted, make sure the paint has cured completely. Make sure FrogTape Delicate Surface is flush to the edge you will be painting and adhere the product in short sections to avoid stretching the tape.Patented PaintBlock® Technology is what makes FrogTape Delicate Surface Painters Tape different from other painter’s tapes. This technology prevents latex paint from bleeding by forming a micro-barrier along the edges (it reacts with the water in latex paint). You get a fully sealed tape edge resulting in the sharpest paint lines possible. PaintBlock® is Superabsorbent Polymer (SAP) which absorbs and retains large amounts of a liquid relative to its own mass – it is used in many everyday items, including baby diapers. As with any other painting tape, it is recommended that you remove and reapply FrogTape in between coats of paint. If not, you run the risk of the layers of the paint becoming too thick and bridging over the tape. This can cause the fresh paint to tear when you remove the tape.Carrier/Backing: washi paper. Adhesive: acrylic. Thickness: 3.6 mils (carrier, adhesive). Adhesion: 14 ounces per inch (to stainless steel test panel). Tensile Strength: 23 pounds per inch (longitudinal). Service/Operating Temperature: 50F to 120F. Application Temperature: 200F (maximum). Elongation: 4.5%. Core: 3-inch diameter. FrogTape Delicate Surface Painters Tape is a low-adhesion painters tape designed for use on the following surfaces: Freshly painted surfaces (24 hours old) Faux finishes Primed wallboard / sheetrock Wallpaper Finished wood (Polyurethane, Stain) Veneer, laminate and vinyl FrogTape Delicate Surface will remove cleanly from most surfaces for up to 60 days. It’s recommended to test before use on all surfaces including those with texture. Patented PaintBlock® Technology is what makes it different from other painter’s tapes. This technology prevents latex paint from bleeding by forming a micro-barrier along the edges (it reacts with the water in latex paint). You get a fully sealed tape edge resulting in the sharpest paint lines possible. PaintBlock® is Superabsorbent Polymer (SAP) which absorbs and retains large amounts of a liquid relative to its own mass – it is used in many everyday items, including baby diapers. As with any other painting tape, it is recommended that you remove and reapply FrogTape in between coats of paint. If not, you run the risk of the layers of the paint becoming too thick and bridging over the tape. This can cause the fresh paint to tear when you remove the tape. Made in the U.S.Application Instructions Clean the surface to be masked. Make sure it is dust-free and dry. If the surface has been recently painted, make sure the paint has cured. For accurate placement, adhere FrogTape in short sections to avoid stretching the tape. Make sure FrogTape is flush to the edge that you will be painting. Using a putty knife or 5-in-1 tool, press the tape you positioned to burnish it to the surface you are masking. Removal Instructions Remove the tape immediately after you are finished painting. This will help prevent paint from bridging over the tape and tearing when you remove it. When latex paint begins to dry, it becomes rubbery (like a rubber band) and has a tendency to pull. Remove the tape slowly and pull at a 90-degree angle. If the new paint does begin to tear, gently score the edges with a razor blade. If the tape begins to tear the wallboard when it is being removed, this likely means you have masked on a poorly bonded surface. Try softening the tape’s adhesive with a blow dryer. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 24mm wide. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information- Core: 3 inch diameter – Backing/Carrier: washi paper – Adhesive: acrylic – Thickness: 3.6 mils (carrier, adhesive) – Adhesion: 14 ounces per inch (to stainless steel test panel) – Tensile Strength: 23 pounds per inch (longitudinal) – Application Temperature: 200F (maximum) – Service/Operating Temperature: 50F to 120F – Elongation: 4.5 %
tesa 4298 Appliance-Grade Tensilised Non-Staining Strapping Tape: 3/4 in. x 60 y
Product Highlightstesa 4298 Appliance-Grade Tensilised Non-Staining Strapping Tape is a specially designed tape made for holding and securing applications and features stain and adhesive transfer resistance. This medium-duty tensilised polypropylene (TPP) strapping tape is made with a natural rubber adhesive system and features residue-free removal and no discoloration.Using tesa 4298 Appliance-Grade Tensilised Non-Staining Strapping Tape during transport helps prevent damage to furniture, appliances, and other products. Shelves, loose bins, other small parts, and especially glass shelving can be kept in place during the move using this strapping tape and then removed without leaving a residue.Features and benefits of tesa 4298 Appliance-Grade Tensilised Non-Staining Strapping Tape include a special adhesive for residue-free removal, even at low temperatures, high tensile strength to avoid rattling, no risk of tearing, strong, and stress-resistant.tesa 4298 applications include holding and securing doors, trim, shelves, and other small parts in the appliance industry, closing, holding, and securing in the automotive, furniture, and office equipment industries, handle protection, and “L” clip and “C” clip closures and reinforcements.Carrier/Backing: tensilised polypropylene (TPP). Adhesive: natural rubber. Thickness: 4.5 mils (carrier, adhesive). Adhesion: 45.7 ounces per inch (to stainless steel test panel). Tensile Strength: 171 pounds per inch (longitudinal). Elongation: 35%. tesa 4298 Appliance-Grade Tensilised Non-Staining Strapping Tape is a specially designed tape made for holding and securing applications and features stain and adhesive transfer resistance. This medium-duty tensilised polypropylene (TPP) strapping tape is made with a natural rubber adhesive system and features residue-free removal and no discoloration. Using tesa 4298 Appliance-Grade Tensilised Non-Staining Strapping Tape during transport helps prevent damage to furniture, appliances, and other products. Shelves, loose bins, other small parts, and especially glass shelving can be kept in place during the move using this strapping tape and then removed without leaving a residue. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 18mm x 55m. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information- Backing/Carrier: tensilised polypropylene (TPP) – Adhesive: natural rubber – Thickness: 4.5 mils (carrier, adhesive) – Adhesion: 45.7 ounces per inch (to stainless steel test panel) – Tensile Strength: 171 pounds per inch (longitudinal) – Elongation: 35 %
3M Scotch 401+ High Performance Green Masking Tape: 3/4 in. x 60 yds. (Green)
3M High Performance Green Masking Tape 401+ measures 0.75 inch x 60 yards. Contains a proprietary solvent-free adhesive which adheres to most surfaces including metal, rubber, glass and plastic while removing cleanly in one piece. This industrial-strength tape is ideal for use in critical paint masking applications and features a temperature use range up to 250 degrees Fahrenheit for 30 minutes. Tape has a high-strength green crepe-paper backing. It conforms to irregular surfaces, resists bleed through from most industrial paint systems, improves visibility during the paint masking process and offers super sharp paint lines.