Kingsley Evans Logo

Item Tag: Buyer

Premium RCRA3/4 Furnace HVAC Bearing 3/4″ Bore w/Collar & Rubber Ring | LRCR3/4

Newly produced, Low Noise & Vibration, with Contact Trash Guard Seal at both sides, Rubber Ring/Boot, Eccentric Locking Collar and Extended inner ring. Filled with Chevron high temp grease 50%. Bore / Shaft Size: 3/4″ / 19.05mm Total Width: 1.295″ / 32.9mm, Extended at Collar side Outer Diameter: 1.811″/ 46mm, Flat/CylindricalOuter Ring Width: 0.72″/ 18.3mm Defective items: 14 business days from date of receipt on items received not as described. All other returns – 30 business days from the date of receipt and all parts must be in their original condition. Parts damaged due to improper installation or abuse are not returnable. Buyer responsible for return shipping and original shipping cost, refund on item subject to a 20% re-stocking fee. Warranty seals may be present, seals are broken, tampered with or removed the warranty is void.

3/4″ BRASS ROD 12″+ BRASS HALF HARD 3/4 DIAMETER BRASS(DRIFT PUNCH?)

YOU ARE BUYING ONE BAR 3/4″ BRASS ROD 12″ OR LONGERTHESE RUN FROM MINUS 0″ – TO 3/4″ OVER 12″ MOST ALL ARE OVER IN LENGTHSOLD OVER 200 OF THES I LET IT RUN OUT 3 WEEK AGO AND DID NOT CATCH IT MATERIAL IS 360 HALF HARD EXCELLENT FOR DRIFTTHERE ARE SOME SHORTER PIECES IF NEEDED ASK MAKES A GOOD CHEAP BRASS PUNCHNEW DROPS NEW SOME COULD HAVE A SCRATCH OR MARK FROM STOCKING AND SAWING WHEN YOU BUY THIS IT IS SOLD FOR 6 FOOD PANTRIES AND THEY ALL THANK YOU

3/4″ Dia Liquid Tight Conduit 50 FT,Flexible Non-Metallic PVC Conduit 3/4 Waterp

About this item【Premium Liquid-Tight Conduit】3/4 flexible electrical conduit made from anti-oxidation virgin PVC.Smooth inside for easier wire pulling,no hazardous sharp edges or burrs.Integral rigid & flexible PVC construction will not damage conductors,and 50% lighter than metallic conduits.Costs less to install.【Safety and Sturdiness】Ansgery 3/4 liquid tight conduit resists to corrosion,water,oil,abrasion,acid,metal shavings and rough environment;Resistance to pulling and crushing;Fully adaptable to outdoor environments such as direct sunlight,direct burial.Stays flexible in extreme hot and cold temperatures.【Complete Accessories】3/4 Inch 50 FT Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.Flexible Electrical Conduit Length:50 FT,ID:3/4inch,OD:1inch,Thick: 2.5 mm,Fittings install directly onto conduit for waterproof joints.【Effortless Installation】Liquid-Tight Conduit Fits is fast,length can be cut to size,only one person can complete the work in a few minutes.flexible conduit connector is safe to use and does not require any tools.You can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.【Wide Applications】PVC electrical conduit has very good durable, pulling and squeezing;Widely used in HVAC equipment, machine tools,marine equipment,motors and controls,printing equipment,pumps, refrigeration equipment,transformer connections,outdoor lighting.【Warm Tip】All our liquid tight conduit are equipped with Straight and Angle Fittings Included. When you have any questions about the products you receive, please contact customer service staff at the first time,we will try our best to solve it for you.

BK Resources BKG-QDC-75 3/4″ FPT Gas Quick Disconnect

ACDID185142 ACDMA1253 ACDCA258560 ACDSEP ACDSP ACDTY9 ACDGC PeSAMember BK Resources 3/4″ FPT Gas Quick Disconnect – BKG-QDC-75 Due to ongoing supply chain issues, extended lead times may apply. Please contact us for additional information 3/4″ FPT Gas Quick Disconnect Features:Gas Quick Disconnect 3/4″ FPT Specifications SKU: 185142 Manufacturer: BK Resources Model: BKG-QDC-75 Weight: 1 lbs. Width: 5 in. Depth: 4 in. Height: 2 in. Other Related Items from ACityDiscount See more items related In Parts & Accessories Made by BK Resources Pre-Owned / Used Equipment Powered by PeachTrader, Inc. Copyright © 2024 ACityDiscount. All Rights Reserved

Forney 60190 Flap Wheel 1” x 1” 60 Grit Aluminum Oxide 25,000 RPM

Expedited shipping available upon. We ship daily, any way you need, you pay the difference. CIK Asset RecoveryIn Business since 2005Atlanta, GA We buy and sell used industrial equipment all over the world. We don’t calibrate or certify anything; All equipment is sold in working condition (unless otherwise clearly specified as parts/not working) but should be considered “as is” and with no warranties expresses or implied. DISCLAIMER: Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by bidding on this equipment, indicates their acknowledgement of, and agreement to the terms of this disclaimer.