E71T-GS Flux Core MIG Wire .030/.035 2/10LB 1-5pk Gasless Mild Steel Welding
Gasless flux cored MIG welding wire AWS E71T-GS. E71T-GS FLUX CORED WELDING WIRE. Vertical Welding. Flat Welding. Up Welding. Corner Welding. All positions, single and multi pass welding. To effectively prevent the welding wire from oxidation.
ER70S-6 MIG Solid Wire .023/.030/.035 2LB Carbon Steel Welding Spool
ER70S-6 0.035 in. Dia 2 lbs. Copper Coated Solid Wire (2 Rolls)
Excellent bead appearance and sound X-ray quality. Served as both carbon dioxide and mixture gas, and stable arc performance in almost welding current.
33lb 0.035 MIG Welding Wire Mild Steel ER70S-6 .035″ (0.9 mm) – 33 Lbs Roll
ER70S-6 Mild Steel MIG Welding Wire Wire Diameter: .035″ inches (0.9mm) Weight: 33-lbs Roll Measurements: 10.5″ inch – Spool Diameter 2″ inch – Center Hole (Hub) Diameter 4″ inch – Wide Spool It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. The Roll comes packed in moisture-resistant plastic film. Deposited chemical composition: (wt%) C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11 .
Washington Alloy Mig Welding Wire Steel .035″ x 33 lbs. Spool ER70S-6
New Single Roll 33 lbs. each. Pallet of 60 available at the beginning of this listing.Make and offer or click this listing to buy it now https://www.ebay.com/itm/196362535869 ER70S-6 BAREAWS A5.18 ER70S-6 | ASME SFA 5.18 ER70S-6This 70S-6 Bare is a non-copper coated carbon steel that contains high-levels of manganese and silicon for stronger deoxidizing power while having excellent welding results at optimal control at high welding speeds and amperage found in robotics or automation. Applications:Found in structural carbon steel pipeline/fitting, automotive, pressure low fume, low spatter, reduced copper fumes and less heat build up in excess long linersTypical Weld Chemistry (%)-ER70S-6 BAREAWS SpecC0.060.06 – 0.15Mn1.461.40-1.85Si0.860.80-1.15Mo0.15 max0.01Ni0.15 max0.01Cr0.15 max0.03Cu0.50 max0.02P0.025 max0.011S0.035 max0.005V0.03 max0.002Typical mechanical properties of weld metal-AWS SpecER70S-3Tensile strength (psi)70,000 min82,935Yield strength (psi)58,00071,420Elongation in 2″ (%)22% min28.1%Charpy V-notch at 0 F (ft. lbs)20 ft lbs min116Reduction of area-59%Average Brinell Hardness-164
Westward 24D975 Mig Welding Wire, Carbon Steel, 0.035 In Diameter, 33 Lb
MIG Welding(GMAW). Welding Current Designation. For Welding Position. Carbon Steel to CarbonSteel. Otherwise it is new and in excellent condition. FREE LOCAL PICKUP available in Carlsbad, CA. Tensile Strength (Minimum Required).