BA-430 Polyurethane Adhesive – Quart Kit (64 fl oz total)
BA-430 Polyurethane Adhesive Caseway BA-430 is a light amber, 2-part kit for adhering Polyurethane to itself and other dissimilar materials like wood, metal, ceramics, rubber, and mechanical plastics. It is ideal for a wide variety of industrial applications requiring resistance to impact, vibration, and chemicals. BA-430 is also recommended for surfaces with widely different thermal expansion characteristics. Continuous service at -20°F to 200-250°F and even higher temperatures may be tolerated for short durations. Once cured, BA-430 is moisture proof and resists alkalis and most acids. Advantages For Adhering Long Pot Life Chemical Resistance Impact & Vibration Resistance Weather Resistance Continuous Operation Range: -20°F to (200-250°F) Polyurethane Dissimilar Materials: Wood Metal Ceramics Rubber Other mechanical plastics Features and further details Contact Caseway for additional detailed information on applications, directions, and safety. Notice: This item is intended for industrial users only. Do not use if you are an un-experienced individual. Do not handle until all safety precautions & statements have been read and fully understood. Wear proper safety equipment. Availability: Available in Pint Kits (32 fl oz total) & Quart Kits (64 fl oz total) Color: Component A: Clear (slightly opaque) – Component B: Amber Working Time (pot life) @77°F: 120 minutes *(100 gram batches) 65 – 85% Bond Strength: 24 – 48 hours Coverage Area (at .04 inch thick): Pint Kit (10 sq. ft) – Quart Kit (40 sq. ft) Contact us We can be contacted at any time through eBay messages or our website if you have any questions, comments or product requests. We will respond to you within 24 hours and do our best to help you out! We encourage our customers to contact us with any questions or concerns! Safety: Wear protective gloves, protective clothing, eye protection, face protection. This product should never be used in a poorly ventilated (confined) area and without a suitable respiratory mask. This product is intended for use by experienced individuals. Do not handle until all safety precautions have been read and understood. Read the product label & safety data sheet (SDS) for information on proper handling, health risks, firefighting methods, spill procedures, emergency contact information, precautionary information, disposal information & more. SDS are available at www.casewayproducts.com or by emailing caseway. Shipping: Hazardous Material: Ships UPS ground only. Ships within 24 hours (Monday – Friday) Disclaimer: It is the responsibility of the user to test the material compatibility and method used to apply this product before actual application. The information, suggestions, technical data, and advice provided on this sheet are based on test results, knowledge, and experience believed to be accurate and reliable. However, all information, suggestions, technical data, and advice are not to be considered a warranty and Caseway Industrial Products, Inc. assumes no liability for any direct, indirect, punitive, incidental, special consequential damages, to property or life. Thank you for shopping with Caseway!
BA-500 Teflon Adhesive – Quart Kit (64 fl oz total)
Free eBay listing template designed by dewiso.com BA-500 Teflon Adhesive – Quart Kit Caseway BA-500 is a light amber, 2-part kit for adhering Teflon to itself and other dissimilar materials such as wood, metal, ceramics, rubber, and plastics. Ideal for applications requiring shock/vibration resistance, moisture-proof, and surfaces of widely different thermal expansion characteristics. Continuous service at -20°F to 250°F, even higher temperatures may be tolerated for short durations depending on application. Cured BA-500 resists moisture, alkalies and most acids. Quart Kit: Component-A 32 fl oz, Component-B 32 fl oz, (64 fl oz total) For Bonding Advantages TeflonDissimilar Materials: Wood – MetalRubber – Ceramics – Other Plastics • Long Pot Life • Good outdoor weatherability • Impact & Vibration Resistance • Chemical Resistance Typical Properties & Characteristics Color Coverage Area Operating Range Working Time 65-85% Bond Strength Part A: Clear (Slightly Opaque) Part B: Dark Amber Pint Kit: 10 sq/ft Quart Kit: 20 sq/ft (@ .04 in thick) -20°F to 250°F 120 Minutes (100 gram batches) 24 – 48 Hours *Typical Properties & Characteristics may vary depending on factors and conditions including but not limited to substrates, temperature, humidity, and user application. Additional technical information is available upon request Directions Preparation: The surfaces to be joined must be clean, dry, and free of oils and greases to obtain maximum adhesion. Humidity and temperature can greatly affect cure time. Do not use cleaning products that may introduce moisture, grease, or oil to the surfaces. Ensure tools and containers are not lined with a coating that may affect either component. Mixing with wood utensils or paper containers may cause moisture contamination. It is recommended to use a clean glass, polyethylene, or polypropylene container. Significantly higher strength has been obtained when roughening teflon and other plastics before adhesion. Some dissimilar materials may not be compatible for etching such as rubber or ceramics.Mixing: Parts to be adhered should be prepared before mixing. Use equal parts of A & B by weight. Mix thoroughly, scraping down the sides of the container occasionally. *Some applications may have better performance with different mixing ratios.Application: It is recommended to apply using a brush or roller coat however a spatula may be used. Contact pressure is adequate for most applications. Cure: Typical cure strength will reach 50% after 24 hours at 77°F. Complete cure are room temperature requires three days or four hours at 200°F. Properties of the room temperature cured formula may be improved by a post-cure of 30 minutes at 140-200°F. *It is the responsibility of the user to test the material compatibility and method used to apply this product before actual application. Shipping Ships UPS Ground only or UPS Surepost only. Orders typically ship within 24 hours (Monday – Friday). International shipments may take 48 hours to ship. Safety & Storage Shelf Life: 12 months (365 days) from date of manufactureStorage: Tightly cap and seal the container as best as possible. Store in original container at room temperature away from direct sunlight. Store locked up in an area not accessible to children.Safety: This product is considered a hazardous material. Do not handle until all safety precautions have been read and understood. Read the product label & safety data sheet (SDS) for information on proper handling, health risks, firefighting methods, spill procedures, emergency contact information, precautionary information, disposal information & more. SDS are available at our website.Always wear protective gloves, protective clothing, eye protection, and face protection. Disclaimer The information, suggestions, technical data, and advice provided on this sheet are based on test results, knowledge, and experience believed to be accurate and reliable. However, all information, suggestions, technical data, and advice are not to be considered a warranty and Caseway Industrial Products, Inc. assumes no liability for any direct, indirect, punitive, incidental, special consequential damages, to property or life. Contact Caseway at any time through EBay messaging or our website for any questions, comments, or requests.