Steampunk STEEL lamp pattern dxf CNC file for PLASMA cutting on thumb drive
.dxf format artwork for CNC plasma cutting (or high power laser)Delivered on a thumb drive. The thumb drive DOES contain large format images and detailed assembly instructions, open the .html file for the instructions. photos and instructions are also available on our website.(See photo #2 for the layout sample) Drawn at full scale for maximum detail (high resolution).After payment, we’ll provide a detailed parts list and assembly instructions. Uses common off-the-shelf parts.THIS LISTING IS FOR THE DXF FORMAT FILE ON thumb drive.. No parts are included. Photos of the finished item are for informational purposes only. Sample item pictured was made from 1/4 inch and 11 ga mild steel. Yes, it functions mechanically… turn the handle and the gears turn to adjust the position. Flip the giant lever to turn the lamp off and on (uses a standard wall switch hidden under the steel lever).For metric units: Scale according to photo #7 above. Replace the 1/4 inch steel with 6mm, replace the 11 gauge steel with 3mmMaterial required 1/4 inch: 46 in. x 18 in., 11 ga: 30 in. x 12 in.Finished lamp measures 23 inches high when lowered, 33 inches high when fully extended.We also offer other plans (files) for a very large steel floor lamp similar to this, see our eBay store.This is all original artwork created by Fred Nelson Fabrication and we legally own the content (sometimes called intellectual property). You are welcome to make and sell physical items from the digital files however, the files themselves are not intended for distribution or re-sale and may not be copied, duplicated, or transmitted in any way. Buyer agrees not to copy or distribute the electronic files.Feel free to contact us with questions. California residents add tax. Produced by Fred Nelson Fabrication. All rights reserved.
BIG Dinosaur dxf file on thumb drive for 3/16th steel CNC Plasma, laser
BIG DINOSAUR dxf format clip art for CNC cutting. Delivered on thumb drive.Perfect for CNC plasma cutting, water jet, or laser. This version is designed for 3/16 inch steel Carefully pre-nested. Requires (1) 4 x 5ft sheet of 3/16ths steel. Make a dinosaur 7 feet long 52 inches tall Drawn at full scale for maximum detail. Includes .dxf format file on a flash drive (no parts are included). We will also provide additional photos, diagrams, and detailed assembly instructions. We created, cut, tested, and refined this artwork for excellent results. Cutting tips and tricks: When you create your cut path, put the start point for each part at the beginning of one of the slots (cut a slot to begin each part). Otherwise the part(s) may drop out or tilt before the cutter is able to finish the final slot. Cut and test fit a couple parts before cutting the entire pattern. Some ‘clean-up” of the slots may be required depending on the quality of your cut. For smaller or larger scales, see our eBay store California residents add tax. This listing is for the electronic dxf file on CD. Photos of the finished item are for informational purposes only. Photo of the assembled dinosaur is how your item might look after you cut, clean, and assemble it. After purchase, we will provide detailed assembled instructions. This is all original artwork created by Fred Nelson Fabrication and we legally own the content (sometimes called intellectual property). You are welcome to make and sell physical items from the digital files however, the files themselves are not intended for distribution or re-sale and may not be copied, duplicated, or transmitted in any way. Buyer agrees not to copy or distribute the electronic files.Produced by Fred Nelson Fabrication All Rights Reserved.
Steel industrial lamp pattern dxf CNC file on thumb drive
.dxf format artwork for CNC plasma cutting (or high power laser)Delivered on a thumb drive. The thumb drive DOES contain large format images and detailed assembly instructions, open the .html file for the instructions. High resolution photos and instructions are also available on our website.(See photo #2 for the layout sample) Drawn at full scale for maximum detail (high resolution).After payment, we’ll provide a detailed parts list and assembly instructions. Uses common off-the-shelf parts.THIS LISTING IS FOR THE DXF FORMAT FILE ON thumb drive.. No parts are included. Photos of the finished item are for informational purposes only. Sample item pictured was made from 1/4 inch and 11 ga mild steel. Yes, it functions mechanically… turn the handle and the gears turn to adjust the position. Flip the giant lever to turn the lamp off and on (uses a standard wall switch hidden under the steel lever).For metric units: Scale according to photo #7 above. Replace the 1/4 inch steel with 6mm, replace the 11 gauge steel with 3mmMaterial required 1/4 inch: 46 in. x 18 in., 11 ga: 30 in. x 12 in.Finished lamp measures 23 inches high when lowered, 33 inches high when fully extended.We also offer other plans (files) for a very large steel floor lamp similar to this, see our eBay store.This is all original artwork created by Fred Nelson Fabrication and we legally own the content (sometimes called intellectual property). You are welcome to make and sell physical items from the digital files however, the files themselves are not intended for distribution or re-sale and may not be copied, duplicated, or transmitted in any way. Buyer agrees not to copy or distribute the electronic files.Feel free to contact us with questions. California residents add tax. Produced by Fred Nelson Fabrication. All rights reserved.