Laminate T-Shaped Solenoid, Open Frame 115 VDC 0.24A, 475 Ohm Continuous Duty
This solenoid has a T-shaped laminated design plunger and laminated steel frame. It has the unique ability to hold an exceptionally heavy load with a minium of humming or vibration. To minimize the humming or chattering of most solenoids, the contact surfaces of the laminated frame and plunger are machined to provide a smooth and flush contact surface. Laminate solenoids consist of a laminated steel frame, a coil, and a movable plunger in the center of the coil. When the coil is energized the plunger is pulled into the coil E120-87 – Linear Solenoid, DC. Operation: Pull. Load Force: >48 oz. Stroke Length: 0.75. Duty Cycle: Continuous. Coil: 115VDC 0.24A 475 Ohms. Plunger Config: Rectangular w/u-brkt. Mech: 8 holes on base. Body Dimensions: 1.2″x1.5″x2.5″. Connection: Solder Lugs on coil. Weight: 0.4 lbs. New Old Stock – May have slight rust