3/8″ NPT Motorized Ball Valve Body 9, 12V to 24V AC / DC 3-wire Brass FKM/PTFE
Valves4projects — supplying high quality valves since 2004. Over 40,000 valve orders shipped. EHCOTECH M21BV-3/8-E3BW MOTORIZED BALL VALVE 3/8″ NPT | Brass Body | 3-Wire Actuator | 0 – 215 psi | 9 to 24V DC/AC General FREE 2 to 4 DAY SHIPPING, ships within one business day from San Diego, California 2-way, bidirectional 3-wire actuator – See Electrical/Wiring section below for details Visual valve position indicator 4 second cycle time from closed to open and vice versa Excellent choice for gravity feed applications Excellent choice for activations prone to water hammer Excellent choice for applications requiring long activation periods Port Size 3/8″ NPT (female) inlet / outlet ports Outer thread diameter / TPI (threads per inch): 0.675 inches / 18 TPI Full port design (3/8″ or 10 mm internal port diameter) Straight through design (no directional changes inside valve) Pressure and Temperature 0 to 215 psi (0 to 15 BAR) Max media temp: 265º F (130º C) Superior to solenoid valves in gravity feed and low pressure applications Suitable Media Water, Air, Fuels, etc. Media must be compatible with FKM (Viton) rubber (check with us for compatibility) Electrical / Wiring 9 to 24-volt AC or DC (auto detects voltage) 200 mA max while ball is turning 20″ power cable with 3 leads 3-wire actuator – Wired as follows: Black Wire: connect to negative Red Wire: Connect to continuous positive (allows closing of valve when green wire is de-enrgized) Green Wire: Connect to your switch or controller (energize to open valve / de-energize to close valve) Internal micro-switches stop current flow to motor when open/closed positions are reached Valve Materials Valve body: Brass Ball: Stainless Steel (SS304) PTFE (Teflon) Primary Seals, FKM (Viton) Secondary Seals Metal gears Dimensions Height: 3-7/8″ Width: 2-1/2″ Length: 2-7/8″ Weight: 13 oz Store Policies Customer service is our #1 priority. If you are not completely satisfied, please contact us and we will make it right! All orders are shipped within 1 business day 30-day, hassle free returns 6 month warranty on all motorized ball valves Please use store categories on the left side to explore our other valves Copyright © Ehcotech International Inc. 2015
1/2″ 110V 120V AC Brass Electric Solenoid Valve Water Air Gas Viton NC 110VAC
Valves4projects — supplying high quality valves since 2004. Over 40,000 valve orders shipped. EHCOTECH B21V-1/2-CC-120VAC SOLENOID VALVE1/2″ NPT | 110/115/120VAC | Brass Body / FKM (Viton) Seal | Normally Closed | 0 – 145 psi More than 20,000 EHCOTECH 21-series valves have been delivered to hobbyists, businesses and manufacturers. GeneralFREE 2 to 4 DAY SHIPPING, ships within one business day from San Diego, CaliforniaGreat general purpose valve for many water, air, fuel, or gas projects2-way, Normally ClosedSemi-Direct Acting Valve (allows for good low pressure performance and gravity feed capability) Fast acting Port / Orifice Size 1/2″ NPT (female) inlet / outlet portsOuter thread diameter / TPI (threads per inch): 0.840 inches / 14 TPILarge internal orifice (5/8″ or 16 mm internal orifice diameter)Cv value: 4.8 Pressure and Temperature0 to 145 psi or Vacuum Max media temp: 265° F (130° C)Excellent choice for low pressure applications due to semi-direct lift design Gravity Feed capable Suitable MediaWaterAirGasesDieselGasoline (with or without Ethanol)Glycol Other media compatible with FKM/Viton Coil Options 110/115/120-Volt AC / 22VA (Volt-Amps) or 22 Watts COIL OPTION #1: LEAD WIRE COIL (see pictures) IF NO SPECIAL REQUEST IS MADE, WE WILL SHIP WITH THE LEADWIRE COIL Metal shielded coil (IP54 rating) 5.5″ lead wires (fast/simple wiring for quick projects) 1/2″ conduit connectionCOIL OPTION #2: DIN CONNECTOR COIL (see pictures) YOU MUST REQUEST THIS OPTION VIA EBAY MESSAGE OR LEAVE A NOTE DURING CHECKOUTResin encapsulated coil (IP65 rating)Screw-down terminals inside the connector for your own cable/wires Valve MaterialsValve body: BrassPlunger and plunger guide tube: Stainless Steel Diaphragm: FKM (Viton)DimensionsHeight: 4″Width: 2″ (lead wire coil version) or 1-3/4″ (DIN coil version) Length: 2-3/8″Weight: 1 lb 8 oz Store PoliciesIf you are not completely satisfied, please contact us and we will make it right!12 month warranty Please use store categories on the left side to explore our other valves Copyright © Ehcotech International Inc. 2017
1/2″12VDC Electric Aux Fuel Tank Valve for Trucks Gasoline Diesel 12 Volt DC
Quality valves from a real company — buy with confidence. Best warranty and parts availability. Ships within 24 hours from San Diego, California Multiple Shipping Options Free shipping General 1/2″ NPT inlet and outlet ports Normally Closed (N/C) Direct acting valve 1/4″ internal orificeTwo 5 mm machine screw holes on bottom for mounting Coil / Electrical 12-Volt DC (1.2 A)Epoxy encapsulated coilDIN connector for easy wiring Pressure and Temperature 0 to 60 PSI (0 to 4 BAR) 265° F (130° C) Max Media Temp Valve Materials Brass bodyStainless Steel Internal Components FKM (Viton) rubber diaphragm Suitable Media Gasoline Diesel Dimensions Height: 3-3/8″ Length: 2-3/4″ Width: 2″ Weight: 1 lb 4 oz GENERALWe stock this valve specifically for auxiliary fuel tanks installations although it could be used for low pressure gas applications and many other low pressure and gravity feed applications. VALVE COIL / ELECTRICAL The valve coil is epoxy encapsulated and comes with a DIN connector. Your electrical cable or wires will be run into the connector . The connector has screw-in terminals which make the wiring easy (wiring directions are included with the valve). The coil is rated for continuous duty, which means that the temperature will stabilize at a safe level and will not continue to rise indefinitely. As with most continuous duty rated valves, the coil may still get warm or even hot during long activation periods. This is completely normal for most solenoid valves. PIPE THREAD INFORMATION Pipe thread sizes can be confusing if you are not familiar with the standard. The table below shows the most common NPT (National Pipe Thread) sizes, their equivalent outer thread diameters, and the number of threads per inch (TPI): Thread Size Outer Thread Diameter TPI 1/8″ NPT 0.405″ 27 1/4″ NPT 0.540″ 18 3/8″ NPT 0.675″ 18 1/2″ NPT 0.840″ 14 3/4″ NPT 1.050″ 14 1″ NPT 1.315″ 11.5 TECH SUPPORT / CUSTOMER SERVICE We care about our customers. Please contact us if you need any help or tech support! PARTS AVAILABILITY We carry repair kits and coils for most of our valves. Please contact us for pricing and availability. SHIPPING OPTIONS FREE shipping is offered on most items via domestic economy shipping. The Priority Mail option gives a 2 to 3 day delivery time within the contiguous U.S. for a flat rate of $3.99 per order. See all Domestic and International shipping options and prices under eBay’s “Shipping and Payments” tab. 12-MONTH WARRANTY Our warranty works without hassles. All replacements are quickly shipped from our warehouse in San Diego, California. You are responsible for the cost of shipping the defective item back to us; we gladly cover shipping cost back to you. If time is of essence, make sure to call us first. We understand that down-time can be expensive and we will do our best to work with you.Please note that diaphragms and coils are considered “wear and tear” items and are not typically covered by the warranty. 30-DAY RETURNS If you are not happy with our products for any reason, you may return them for a full refund (excluding shipping charges) within 30 days of the purchase. OEM CUSTOMERS AND LARGE QUANTITY ORDERS We work with Original Equipment Manufacturers (OEMs) on regular basis. Please contact us for OEM pricing and/or large quantity discounts. USE THE STORE CATEGORIES ON THE TOP LEFT SIDE TO FIND OUR OTHER PRODUCTS. _gsrx_vers_486 (GS 6.5.1 (486))