(100) M4x0.7×25 Hex Head Cap Screws 4mm x 25mm Bolts M4-.7 x 25
Thread Length:25mm (Full Thread). Thread Pitch:0.7. Screw Length:25mm (From Under The Head). Head Thickness / Height:2.8mm. NOT previously rejected for quality issues or rescued from a scrap yard. You will get one bag of 100 pieces.
210Pcs ＃8×1″ Self Tapping Screws for Metal,410 Stainless Steel,Metal Screws Self
Self-drilling screws have higher density, better stability, durability, corrosion resistance and wear resistance than ordinary screws.410 stainless steel is a new type of stainless steel with magnetic properties.
Hex 1/4”x2” Rubber Washer Head Pole Gripper Roofing Screws Galvanized Coated #10
Each screw is made from galvanized steel and finished with a Strong Shield coating to resist corrosion and ensure long-lasting performance. Subject: 250 Intercorp 1/4” x 2” Roofing Screws – Hex Head, Rubber Washer, Galvanized Steel.
#10 x 3” Long Hex Rubber Washer Head PoleGripper Roofing Screws Galvanized 25pcs
#10 x 3” Long Hex Rubber Washer Head PoleGripper Roofing Screws Galvanized 25pcs. 1/4” hex head.
#14 Hex Washer Head TEK 5 Self Drilling Screws Strong Shield Coated TEKS Screws
Strong-Shield Coated Hex Washer Head Self Drilling ScrewsACQ Compatible & Features Rust/Acid Protection#14-20Hexagon drive for use with a wrench or socketFully Threaded from tip to headIntegral washer at the top of the head to minimize chance of pull-through Washer portion of screw distributes pressure over a larger surface areaTEK 5 Point used for drilling into structural steelStrong-Shield coating features high corrosion resistance and protection from acid rain & rustDesigned to work with ACQ treated lumberExceeds 1,000/hrs. salt spray resistanceThe higher the TEK number the larger the drill point to pierce heavier gauge metals. TEK-5 self drill points are capable of drilling into structural steel. Hex Head Self Drilling Sheet Metal Screws are installed with a socket or hex nut driver. Hex Washer Head Self Drilling Screws are used in the exterior elements and are corrosion resistant due to the Strong Shield coating.
5/16″-18 Hex Cap Screws / Tap Bolts Coarse SAE Grade 8 Alloy Steel w Black Oxide
New 5/16″-18 Hex Cap Bolts / Screws. These are Grade 8 bolts and meet the SAE material quality standards and are marked as shown. NOTE : Full Thread (FT) up to 1-1/4″, Partial thread (PT) for lengths 1-3/8″ and up. Diameter : 5/16″Thread Pitch : 18 TPI – Coarse (Standard) ThreadLength : Please select from drop down menu above.Wrench Size : 1/2″Type : Hex Cap ScrewsMatching Nut & Washers : 5/16″-18 Available hereSystem of Measurement : Standard (Inch / U.S.)Material : Grade 8 Alloy Steel – HEAVY DUTY!Specifications : ASTM F593 / SAE J429