DIY Stereo Case-kit for Hypex NC122MP/NC252MP with all audio harness
This DIY case-kit, is designed for Hypex NC122MP and NC252MP stereo module, but NOT including any Hypex modulesAudio harness are free includedAlu feet, audio connectors, screws…. all are included;All in all, you just need to have Hypex NC122MP or NC252MP in hand, then you can start the great assembly procedures. Three options: Connectors: Soldering— Soldering wires into standard XLR and Binding Posts;Solderless—XLR/Binding posts are screw-type connectors, no need any soldering proceduresFace-plate: you can choose Black or Silver face-plate. (The case body is always in Black color);LED color: you can choose one of Blue/Green/Orange/White colors; Pre-made audio harness included (Free)Pre-made audio harness, free includedAll cables are cut to the suitable length, with correct plugs on ends1 x Power supply cable: from IEC inlet to module;1 x Signal input cable: from module to two XLR sockets;1 x Speaker output cable: from module to two pairs of Binding posts;1 x LED power cable: from module to Dimmer LED PCB; Main FeaturesWell designed for Stereo Mode, suitable for DIY stereo amp projectStandard Stereo Mode: 1 pair of Balanced XLR inputs, two pairs of Binding postsDefault pre-drilled holes for: NC122MP and NC252MP100% Aluminum Case, nice Ncore logo, Hi-END connectors…etcIncluding all connectors, switches, aluminum feet…etc shown in picturesDimmer LED: DC +10v~~~+26v supply, Led brightness could be adjusted manually at the bottom of chassisLED Color Option: Blue(Default), Green, Orange and White Brief SpecificationsCase Internal size: 193mm(W) x 58mm(H) x 180mm(D)Face-Plate: 8mm thickness & NCORE logo (Option: Blank face-plate without logo is available)Top-Cover: 3mm thickness, with full-size venting holes (Option: Blank top-cover without holes is available)Bottom-Plate: 3mm thickness, pre-drilled holes for Hypex modules (Free drilling for other modules)Rear-Plate: 3mm thickness, pair of XLR sockets, two pairs of Binding Posts, IEC socket with power buttonDC Supply for LED Dimmer: DC +10v ~~~ +26v Packing List (Per case-kit)Aluminum CasePower SupplyAudio PartsAccessories* Front-Panel x 1* Top-Cover x 1* Bottom-Platex 1* Rear-Platex 1* IEC Socket x 1* Power Button x 1* Female 3-Pole XLR sockets x 2* Binding Post(Pair) x 2* Pre-made audio harness* Dimmer LED x 1* Aluminum Foot x 4* Screws