Universal Holster Belt Loops – OWB Angled Belt Loops – (Fits 1.75-2.00in Belts)
Universal Holster Belt Loops – OWB Angled Belt Loops – (Fits 1.75-2.00in Belts) OWB Angled Belt Loops: These are angled-design OWB (outside-the-waistband) belt loops from Talon Retention Systems. They are universal in design and will work on almost any rig. They feature (2) 1/4 inch mounting holes and can be affixed with either a post and screw assembly, or with #8 eyelets. They are semi-flexible and will adapt to almost any placement. Mounting Hardware Option: Each pair of OWB Angled Loops comes with (4) AV-SP-250-BK slotted posts, (4) Oval Head Phillips Drive Screws (AV-832OHP-BK-4375), (4) W-EPDM-500180125 washers, and (4) Black Oxide Finishing Washers (AV-FW-08-BLK-1). This mounting hardware setup is perfect for most applications. Specifications: OWB Loop – Universal Injection Molded Fits Belt Size: up to 2.00 inches Pre-Drilled: (2) Mounting Holes Color: Tactical Black Material: Proprietary Polymer Mounting Hardware Included: Yes if selected Note: These are sold in pairs. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)
Monoblock Belt Clips – Inside-The-Waistband/IWB Holster Mounting Attachments
Monoblock Belt Clips – Inside-The-Waistband/IWB Holster Mounting Attachments The Monoblock belt clip is designed to be mounted directly to a holster/sheath surface. This clip design allows for a very secure carry on belts, waistlines, or any attachment point where the spring steel clip tabs can be positioned securely. Each spring tab has an integrated security clutch to prevent it from easily becoming detached from the mounting point. The Monoblock clip comes in a standard DMG/Cu finish in dark matte grey and is non-reflective. It resists corrosion very well and can be buffed with most over-the-counter lubricants to remove surface blemishes and wear marks. This clip is a versatile and cost effective attachment solution that can be adapted to virtually any gun holster, knife sheath or carry item. Specifications Overall Length: 2.73 Inches Fits: Up to 1.5 Inch Belts Finish: Dark Grey (DMG/Cu) Engraving Included: (Select Above) Reflective: No Hole Pattern: (2)(Slotted) 0.220 height x 0.300 inch width Hole Spacing: (Adjustable) 0.860 – 1.15 inch on centers Hardware Included: (Select Above)Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)
Molle-Lok – Molle Mounting Attachment – (Fits 1.50-3.00in) – (Hardware Optional)
Molle-Lok – Molle Mounting Attachment – (Fits 1.50-3.00in) – (Hardware Optional) The Molle-Lok is a spring loaded mounting attachment. With this design, there is no need for special tools to open the new locking mechanism. All you do is grasp outer heads and slide to manipulate and remove. This new locking system is reusable and failsafe, a requirement of US Military forces. The Molle-Lok is an innovative attachment system which is designed as an optional attaching device for the Military and Law enforcement. The Molle-Lok attaches accessories to the Pals/Molle body armor or load bearing equipment, vests, tactical bags, pouches etc. The adjustable design features mounting points from 1.50 to 2.20 inches in width. Hardware Option: Each Molle-Lok comes with (2) AV-SP-1875-BK slotted posts, (2) AV-832FHP-BK-375 Flat Head Phillips Drive Screws, and (2) W-EPDM-500180125 washers. This mounting hardware setup is perfect for most applications. Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)
Raven Concealment – Overhook Strut – (Fits Up to 1.75in Belts) – (w/Hardware)
Raven Concealment – Overhook Strut – (Fits Up to 1.75in Belts) – (w/Mounting Hardware Options) Raven Concealment Overhook Struts offer a tough snap over to guarantee a snug fit with an easy release. There are ridges on the back of the strut that prevent mounting hardware from damaging sheaths and knives. Each of the pre-drilled holes are 15mm apart center-to-center. With the center hole being a slot, the strut can be rotated up to 10 degrees in either direction. Mounting Hardware Option: Each Raven Concealment Overhook Strut comes with (3) AV-SP-250-BK slotted post, (3) Truss Head Phillips Drive Screw (AV-832THP-BK-312), and (3) W-EPDM-500180125 washer. This mounting hardware setup is perfect for most applications. Specifications Raven Concealment Color: Tactical Black Material: Proprietary Polymer Pre-Drilled: Yes Mounting Hardware Included: Yes (If Selected) Belt size: Up to 1.75 inches Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)