Brazing Alloy, Lucas Milhaupt, Handy Flo, 8 Rods
Made by Lucas-Milhaupt, Inc. A Handy & Harman Company Part# 95136 Handy-Flo For Joining Copper and Copper-based Alloys. 6% Ag. .125″ x .050″ x 20″ Long 8 Rods For joining copper to copper without a flux and copper based alloys (brass and bronze) with a flux. This brazing alloy has been developed and patented for over 75 years. Sil-Fos is the “WORKHORSE” filler metal used in the refrigeration and air conditioning industry. Think of the brazing alloy as the glue that holds the refrigeration system together. The thermal cycling (and subsequent expansion and contraction), vibration stresses and higher pressures of the new refrigerants like (R-410A) strongly suggest that the ductility of the braze alloy is extremely important. Not just for an initial leak tight joint, but to be hermetic (sealed) for many years down the road. Ag: 6% Cu: 88% P: 6% Melt: 1190 F. Flow: 1460 F.
Soft Solder, LEAD FREE, Lucas-Milhaupt, 1 Lb. Roll 95/5
Made by Lucas-Milhaupt, Inc. A Handy & Harman Company Part# 57263 95-5 Silver-Bearing, Lead-Free Soft Solder High-Strength-General Purpose Solder. Higher strength than Tin/Lead solder and safe for potable water systems. Used in low-stress, low-pressure copper-copper and copper-steel applications like; Sight Glasses where temperature must be kept low, etc. Lead Free Solder 1 LB. SPOOL x 1/8″ DIA. WIRE General purpose Tin/Antimony solder. Not for use on brass alloys. Sn: 95% Other: 5% Sb. Melt: 450 F. Flow: 460 F. This 95/5 is solid core. 95% Sn & 5% Sb 1 lb. Roll of 95/5 Soft Solder Solid Core 1/8″ Dia. Wire 1 Lb. Spool Used for soldering copper lines. Can be used with liquid flux or paste flux.