MICROLUBROL M-77 LUBRICANT PASTE GREASE Silicone + Moly, 4 oz, Compare to DC M77
MicroLubrol® M-77 LUBRICANT PASTEExtreme Pressure Lubricating Paste / Grease with 60+% Moly in a High-Performance Silicone Oil Base w/ Lithium Thickener.4 ounces (8 oz. / 114 grams.) BY WEIGHT in a CONVENIENT and DURABLE Double Wall Polypropylene Plastic Jar w/ Lined Cap for Secure Closing. Product features:SIMILAR INGREDIENTS AND PROPERTIES AS DOW CORNING MOLYKOTE M-77.Over 60% Molybdenum disulfide, CAS# 1317-33-5.Base Oil: Dimethyl, phenylmethyl siloxane, trimethyl terminated, CAS# 63148-52-7.Thickener: 12-Hydroxy lithium stearate, CAS# 7620-77-1.Similar black-grey color, consistency, density: 1.95 gm./mL at 20°C (68°F), and base oil viscosity: 125 mm2/s at 25°C (77°F).Paste lubrication up to 230ºC (446ºF).Dry lubrication up to 400ºC (750ºF).Good water resistance.Good volatilization properties.Compatibility with many types of elastomers and plastics.Wider and higher operating temperature range than organic oil based pastes.Extreme load handling capacity.Apply by brushing or burnishing. A multipurpose, extreme pressure lubricating paste that can be used over a wide temperature range. It contains over 60 percent molybdenum disulfide lubricating solids in a Lithium soap thickened ultra-high performance silicone fluid. Suitable for lubrication points with low to moderate loads and low speeds which are subjected to water and extreme loads and temperatures. At temperatures above 230ºC (446ºF), the carrier volatilizes leaving virtually no residue and the remaining dry sliding film itself takes over the lubrication up to 400ºC (750ºF). For automotive and heavy duty general industrial use. A SUPERIOR COMBINATION: – contains molybdenum disulfide (“Moly”) for excellent metal/metal contact lubrication. – Silicone oil based; contains NO mineral or petroleum oils so it is safe for most plastics and rubbers. – Resistant to chemicals and oxidation. – Protects against fretting corrosion. ADVANTAGES: – Extreme pressure anti-seize lubricant paste for assembly and press fitting of new and rebuilt parts and fitting of threaded connections. – lubricates surfaces subject to extreme pressures and wide temperature ranges. – Prevents galling during machinery running-in period. – Extends the wear life of moving parts and equipment. – Help protect against fretting corrosion and cold welding of moving joints. APPLICATIONS: – A running-in lubricant for new or rebuilt equipment including gears, splines, journal bearings, cams and ways. – An assembly lubricant to reduce torque in fastening and unfastening of threads and bolts, minimize tension variation in bolts, facilitate assembly and disassembly and help prevent damage to threads. – Press-fitting lubricant to allow press fitting without chatter or stick-slip that reduces the fit force pressure required for interference fitting and minimizes distortion. – General-purpose lubricant for bearing shafts, bushings, splines, O-rings, packings and seals (except silicone rubber). – Assembly applications where high temperature is a factor. – Lubricating during running-in of gears, splines, journal bearings, cams; reducing torque in tightening threads and bolts; lubricating bearing shafts, O-rings, packings and seals, brake assemblies; press-fitting. – Metal/metal combinations with frictional and contact surfaces, brake anchor plates, and the brake pistons of disc brakes. – Suitable for lubricating parts consisting of materials that are not resistant to mineral oils. NOTE: This material is NOT tested and is NOT represented as suitable for food, medical or pharmaceutical uses. NOTE: Please inquire about discounted shipping for combined or quantity purchases. MICROLUBROL® is a trademark of MicroLubrol, LLC. MicroLubrol, LLC is a supplier and manufacturer of ultra-high quality lubricants for specialty applications. We specialize in lubricants for scientific, precision, hobby and sports equipment which, due to modern technological advances, have reached unparallelled levels of sophistication in materials and component precision that we strive to match with the lubricant products we provide for them. We pride ourselves in using the highest quality and highest technology lubricant products to provide the highest level of performance for each and every application. The correct choice of lubricant for your equipment will insure that it is utilized to its highest possible level of efficiency and performance. We supply serious lubricants for serious applications. (Dow Corning® and Molykote® are Registered trademarks of Dow Corning Corporation. Microlubrol® is a trademark of MicroLubrol, LLC. Dow Corning Corporation, U.S.A. is not affiliated with and does not endorse MicroLubrol, LLC, or its products.) TERMS & CONDITIONSBy bidding and paying for this Item, the Buyer agrees to the following TERMS & CONDITIONS: Buyer must determine own usability. The Buyer agrees to assume all responsibility and risk regarding the safety, suitability of use and legal requirements concerning ownership, storage, installation, operation and use of the Item and to hold Seller harmless and free of all liability regarding the safety, condition, usability, installation, use, maintenance, disposal, legality and suitability of use and any other issues regarding this Item. In any and all cases, Seller’s liability is limited to the amount of the winning bid paid and does not include any direct, indirect, incidental or miscellaneous damages, or any other damages, inconveniences, costs or expenses. Please contact us by email if you have any questions or need clarifications on the listed information. Please include the listing number or description in your email. We will do our best to answer all questions accurately and promptly. We greatly value our customers and our reputation and will work diligently with customers to achieve our goal of mutual satisfaction and positive feedback on every transaction.Buyer pays shipping cost as stated. USPS First Class Mail and USPS First Class Mail International are our shipping methods of choice for this Item. If paying by PayPal, we will ship to the address associated with the PayPal payment unless prior arrangement is approved by us. If paying by other than PayPal, please send your shipping address including zip code and delivery contact phone number as soon as you are notified that you are the winning bidder.We make every effort to ship within 3 business days after payment is received. If payment is not received within 7 days after email notification to Buyer of amount due, transaction is subject to being reported as failed for non-payment and the Item being sold to another buyer. Please contact us as soon as possible if you have questions regarding payment.WE SHIP INTERNATIONALLY however, due to delivery problems, not to some locations. Buyers in a location that we do not show a shipping option for, please contact us BEFORE buying the item.TO OUR INTERNATIONAL CUSTOMERS: ALL INTERNATIONAL customs clearances and import taxes and fees are the sole responsibility of the Buyer at destination. Re-shipping of items returned to us as undeliverable by foreign post authorities will require re-payment of shipping costs to re-ship. Thank you for considering our products!
1oz MicroLubrol ULTIMOX HPL-205 Grease High Performance Lubricant PURE PFPE PTFE
MicroLubrol ULTIMOX HPL-205 Grease High Performance Lubricant, PURE PFPE / PTFE (Perfluoropolyether / Polytetrafluoroethylene), in Convenient 1 ounce (28 gm) Resealable Squeeze TubeMicroLubrol ULTIMOX HPL-205 is an ultra-high quality PFPE/PTFE grease formulated with fully synthetic highly fluorinated perfluoropolyether oil and micronized polytetrafluoroethylene (PTFE). MicroLubrol ULTIMOX HPL-205 is ULTRA PURE white in color and has a National Lubricating Grease Institute (NLGI) #2 light to medium, extremely smooth consistency, exactly like other PFPE/PTFE greases such as the competing popular 205 and 206, making ULTIMOX HPL-205 a perfect drop-in replacement for 205 and 206 in automotive applications. ULTIMOX HPL-205 resists the harshest environments and conditions: heat, cold, ice, snow, rain, water washout, cleaners, acids, caustics, steam and automotive chemicals. FEATURES: Eliminates squeaks, judder and sticking of rubber seals and weather-stripping in convertible tops, trunks, hatches and doors. Eliminates squeaks, rattles and other noise due to vibration and rubbing of rubber and leather, plastic and rubber, and metal and plastic/rubber parts including console parts, fascia and trim panels, seats, . Lubricates spark plug boots, side view mirror mechanisms, windshield wiper mechanisms. O-ring seal lubrication and assembly lube, actuator linkage lubricant, metal and plastic bushing lubricant. Compatible with ALL elastomers including silicone, Viton and the more exotic and expensive fluoroelastomers like Kalrez and Chemraz. SPECIFICATIONS: Silicone-free, VOC-free, Thermally stable, Non-oxidizing, Not hazardous to the environment or ozone layer, Color/Consistency: Pure white, buttery grease, Service Temperature (High): 400 Degress F (204 Deg C), Service Temperature (Low): -30 Degrees F (-34 Deg C), Base Oil Specific Gravity (sp. gr.) @ 0 Deg C: 1.94, Base Oil Viscosity: ISO 150, Grease Thickness/Consistency: NLGI 2, Comparable characteristics and performance as the popular 205 general purpose grease. TERMS & CONDITIONSBy bidding and paying for this Item, the Buyer agrees to the following TERMS & CONDITIONS: Buyer must determine own usability. The Buyer agrees to assume all responsibility and risk regarding the safety, suitability of use and legal requirements concerning ownership, storage, installation, operation and use of the Item and to hold Seller harmless and free of all liability regarding the safety, condition, usability, installation, use, maintenance, disposal, legality and suitability of use and any other issues regarding this Item. In any and all cases, Seller’s liability is limited to the amount of the winning bid paid and does not include any direct, indirect, incidental or miscellaneous damages, or any other damages, inconveniences, costs or expenses. Please contact us by email if you have any questions or need clarifications on the listed information. Please include the listing number or description in your email. We will do our best to answer all questions accurately and promptly. We greatly value our customers and our reputation and will work diligently with customers to achieve our goal of mutual satisfaction and positive feedback on every transaction. Buyer pays shipping cost as stated. USPS First Class Mail and USPS First Class Mail International are our shipping methods of choice for this Item. If paying by PayPal, we will ship to the address associated with the PayPal payment unless prior arrangement is approved by us. If paying by other than PayPal, please send your shipping address including zip code and delivery contact phone number as soon as you are notified that you are the winning bidder. We make every effort to ship within 3 business days after payment is received. If payment is not received within 7 days after email notification to Buyer of amount due, transaction is subject to being reported as failed for non-payment and the Item being sold to another buyer. Please contact us as soon as possible if you have questions regarding payment.WE SHIP INTERNATIONALLY however, due to delivery problems, not to some locations. Buyers in a location that we do not show a shipping option for, please contact us BEFORE buying the item. TO OUR INTERNATIONAL CUSTOMERS: ALL INTERNATIONAL customs clearances and import taxes and fees are the sole responsibility of the Buyer at destination. Re-shipping of items returned to us as undeliverable by foreign post authorities will require re-payment of shipping costs to re-ship. Thank you for considering our products!
MICROLUBROL ARMASIL™ High-Perf 100% Silicone Oil for Airsoft Airgun Air Gun 2 oz
MICROLUBROL ARMASIL High-Perf 100% Silicone Oil for Airsoft Airgun Air Gun 2 oz. Product description:MicroLubrol™ ARMASIL™ AIRGUN OIL IS A TRULY HIGH-PERFORMANCE 100% SILICONE OIL PRODUCT WITH A MORE COMPLEX MOLECULAR STRUCTURE DESIGNED FOR HIGH TEMPERATURE, HIGH SHEAR AND HIGH COMPRESSION APPLICATIONS. MicroLubrol™ ARMASIL™ AIRGUN OIL is a true high performance silicone oil that consists of specially formulated, more complex silicone molecules that give it higher shear resistance, temperature resistance, compression resistance, chemical resistance and overall breakdown and degradation resistance not found in common PDMS oils, even ones with higher viscosities. MICROLUBROL™ ARMASIL™ AIRGUN OIL is completely neutral and unreactive and cannot possibly damage any metal part. In addition, MicroLubrol™ ARMASIL™ AIRGUN OIL is compatible and recommended for use with most rubbers and elastomers including natural rubber, Buna-N, Nitrile, Butyl, EPDM, Neoprene, Silastic, and fluorocarbon rubbers like Viton and Chemraz; and plastics including Nylon, Polypropylene, Polyurethane, Polycarbonate, Polyacrylate, Styrene Butadiene, Polysulfide and PTFE/Teflon. MicroLubrol™ ARMASIL™ AIRGUN OIL is NOT an automotive grade oil and does NOT contain ANY petroleum distillate products OR synthetic petroleum-based oils such as PAO oils. Petroleum based fluids do NOT have the high-shear, high-temperature resistance of MICROLUBROL™ ARMASIL™ AIRGUN OIL and can “diesel” or “tar” when used in high-compression applications.Product features:100% Silicone Oil – NO petroleum distillates or ANY additives, solvents or propellants.Exceptional high-temperature stability during CONTINUOUS use up to 450°F (230°C).Viscosity exactly between that of 20wt and 30wt oil.Suitable for low-temperature operation as low as -40°F (-40°C ).High chemical degradation and breakdown resistance. High oxidation and gumming resistance. NOTE: Please inquire about discounted shipping for combined or quantity purchases. TERMS & CONDITIONSBy bidding and paying for this Item, the Buyer agrees to the following TERMS & CONDITIONS: Buyer must determine own usability. The Buyer agrees to assume all responsibility and risk regarding the safety, suitability of use and legal requirements concerning ownership, storage, installation, operation and use of the Item and to hold Seller harmless and free of all liability regarding the safety, condition, usability, installation, use, maintenance, disposal, legality and suitability of use and any other issues regarding this Item. In any and all cases, Seller’s liability is limited to the amount of the winning bid paid and does not include any direct, indirect, incidental or miscellaneous damages, or any other damages, inconveniences, costs or expenses. Please contact us by email if you have any questions or need clarifications on the listed information. Please include the listing number or description in your email. We will do our best to answer all questions accurately and promptly. We greatly value our customers and our reputation and will work diligently with customers to achieve our goal of mutual satisfaction and positive feedback on every transaction. Buyer pays shipping cost as stated. USPS First Class Mail and USPS First Class Mail International are our shipping methods of choice for this Item. If paying by PayPal, we will ship to the address associated with the PayPal payment unless prior arrangement is approved by us. If paying by other than PayPal, please send your shipping address including zip code and delivery contact phone number as soon as you are notified that you are the winning bidder. We make every effort to ship within 3 business days after payment is received. If payment is not received within 7 days after email notification to Buyer of amount due, transaction is subject to being reported as failed for non-payment and the Item being sold to another buyer. Please contact us as soon as possible if you have questions regarding payment.WE SHIP INTERNATIONALLY however, due to delivery problems, not to some locations. Buyers in a location that we do not show a shipping option for, please contact us BEFORE buying the item. TO OUR INTERNATIONAL CUSTOMERS: ALL INTERNATIONAL customs clearances and import taxes and fees are the sole responsibility of the Buyer at destination. Re-shipping of items returned to us as undeliverable by foreign post authorities will require re-payment of shipping costs to re-ship. Thank you for considering our products!
2 oz MICROLUBROL Hexagonal Boron Nitride hBN Lubricant Powder FINE 2.5 µ Micron
MicroLubrol Hexagonal Boron Nitride (hBN, hex boron nitride, “white graphite”), 2.5 micrometers (microns, µm, micrometers), approximately 5000 mesh equivalent (“mesh” is a measure of the fineness of a material separation screen, but due to the impossibility of weaving such fine wires or filaments to produce such a fine screen there are no actual screens with mesh finer than 600 available, so the number is for relative particle size comparison only). FEATURES:Excellent lubricity: Coefficient of Friction (COF) as low as 0.15Appearance: Ultra-white, crystalline, free-flowing powderHigh purity: 99%High temperature resistance: Temperature stability in air is 1800ºF (1000ºC)NOTE: The Hexagonal Boron Nitride (hBN) product offered here is NOT cosmetic grade and has not been tested for use in cosmetics or any other regulated use.
MicroLubrol 200 Fluid Pure Silicone Lubricant Oil PDMS 1000 cst centistokes 4 oz
MICROLUBROL 200 SILICONE OIL FLUID 1000 cSt Viscosity 4 Fluid Ounces (4 fl.oz, 118 mL) in convenient,resealable plastic bottle w/ twist-open, twist-closed dispensing cap. MicroLubrol 200 Fluid 100% Pure Silicone Oil Polydimethylsiloxane (PDMS) 1000 centistokes (cst) viscosity, 4 oz Bottle. APPLICATIONS:Active ingredient in a variety of automotive, furniture, metal and specialty polishes in paste, emulsion and solvent-based polishes and aerosols. Various applications including elastomer and plastics lubricant, electrical insulating fluid, foam preventive or breaker, mechanical fluid, mold release agent, surface active agent, and solvent-based finishing and fat liquoring of leather. TYPICAL PROPERTIES: Appearance: Crystal clear Specific Gravity at 25°C (77°F): 0.970 Refractive Index at 25°C (77°F): 1.403Flash Point, Open Cup, °C (°F): >315 (599) Pour Point, °C (°F): <-50 (-58) NOTE: Each individual bottle will be clearly identified with the specific viscosity grade purchased. IMPORTANT NOTICE: DO NOT INGEST. NOT tested or rated for use with food or drug products. MicroLubrol neither represents nor tests this material for specific medical device or pharmaceutical applications. Purchaser is fully responsible to determine end-use suitability. NOT FOR HUMAN INJECTION! NOTE: Please inquire about discounted shipping for combined or quantity purchases. TERMS & CONDITIONSBy bidding and paying for this Item, the Buyer agrees to the following TERMS & CONDITIONS: Buyer must determine own usability. The Buyer agrees to assume all responsibility and risk regarding the safety, suitability of use and legal requirements concerning ownership, storage, installation, operation and use of the Item and to hold Seller harmless and free of all liability regarding the safety, condition, usability, installation, use, maintenance, disposal, legality and suitability of use and any other issues regarding this Item. In any and all cases, Seller's liability is limited to the amount of the winning bid paid and does not include any direct, indirect, incidental or miscellaneous damages, or any other damages, inconveniences, costs or expenses. Please contact us by email if you have any questions or need clarifications on the listed information. Please include the listing number or description in your email. We will do our best to answer all questions accurately and promptly. We greatly value our customers and our reputation and will work diligently with customers to achieve our goal of mutual satisfaction and positive feedback on every transaction. Buyer pays shipping cost as stated. USPS First Class Mail and USPS First Class Mail International are our shipping methods of choice for this Item. If paying by PayPal, we will ship to the address associated with the PayPal payment unless prior arrangement is approved by us. If paying by other than PayPal, please send your shipping address including zip code and delivery contact phone number as soon as you are notified that you are the winning bidder. We make every effort to ship within 3 business days after payment is received. If payment is not received within 7 days after email notification to Buyer of amount due, transaction is subject to being reported as failed for non-payment and the Item being sold to another buyer. Please contact us as soon as possible if you have questions regarding payment.WE SHIP INTERNATIONALLY however, due to delivery problems, not to some locations. Buyers in a location that we do not show a shipping option for, please contact us BEFORE buying the item. TO OUR INTERNATIONAL CUSTOMERS: ALL INTERNATIONAL customs clearances and import taxes and fees are the sole responsibility of the Buyer at destination. Re-shipping of items returned to us as undeliverable by foreign post authorities will require re-payment of shipping costs to re-ship. Thank you for considering our products!
4 oz MicroLubrol Molybdenum Disulfide 98% Technical Grade Powder 3 – 4 µm Fisher
Molybdenum Disulfide Powder MICROLUBROL MOLYBDENUM DISULFIDE >98% TECHNICAL GRADE POWDER, average particle size 3 to 4 µm (Fisher Method), 15-30 (Microtrac Method). 4 ounce (4 oz. / 114 gm.) in a CONVENIENT and DURABLE Double Wall Polypropylene Plastic Jar w/ Lined Cap for Secure Closing. MicroLubrol offers exceptional quality Molybdenum Disulfide Technical Grade Powder. Molybdenum Disulfide is a solid lubricant that is used in industrial, manufacturing, mining, marine, agriculture and automotive applications to reduce friction and wear. It lubricates metal surfaces by natural metal-to-metal contact or by manually burnishing the powder onto the metal surface. It is used as an additive to impart extreme pressure performance to lubricants, and to impart lubricity in other industrial and commercial applications. It is also useful as a metal-to-plastic lubricant at low to medium contact pressures. SPECIFICATIONS: – High Purity, > 98% molybdenum disulfide. – Meets MIL specs. MIL-M-7866 and AMS-M-7866. – Used as a solid lubricant additive in plastics, coatings, metalworking compounds and other industrial products. – High temperature, chemical and extreme contact pressure resistance. – Best grade as lubricant additive: meets MIL specs and it is the grade with the lowest acid number for optimum long term performance as an additive in greases and pastes of all consistencies from semi-fluid (NLGI 00), to soft (NLGI 0-1), to normal (NLGI 2-3), to hard (NLGI 4-6). TYPICAL PROPERTIES: – Color: Dark charcoal gray to black. – Appearance: Free flowing powder. – Density: solid material -4.8 to 5.0 g/cm³ powder material -1/3 g/cm³ – Melting point: 1,185° C (2,165° F) – CAS Number: 1317-33-5 ANALYSIS (Typical Values): – MoS2: 98.00 % (Min.) – Acid, Insoluble: 0.50 % (Max.) – Carbon (C): 1.50 % (Max.) – Iron (Fe): 0.25 % (Max.) – Molybdenum Trioxide (MoO3): 0.05 % (Max.) – Oil: 0.05 % (Max.) – Water (H2O): 0.02 % (Max) – Acid Number: 0.05 – Particle Size (Fisher Method): 3 – 4 µm – Particle Size (Microtrac): 15 – 30 µm – Coefficient of Friction (static): 0.07 (approx.) – Coefficient of Friction (dynamic): as low as 0.03 – Hardness: 1 – 1.5 mohs – Made in USA. TERMS & CONDITIONS By bidding and paying for this Item, the Bidder/Buyer agrees to the following TERMS & CONDITIONS: Buyer must determine own usability. Listing description is correct to the best of our knowledge at the time of listing and Seller is not responsible for errors or omissions in the listing information. Unless otherwise stated, data and specifications given are taken from information found on the Item, in the literature accompanying the Item, or from the website of the manufacturer or a distributor of the Item. In any and all cases, Seller’s liability is limited to the amount of the winning bid paid and does not include any direct, indirect, incidental or miscellaneous damages, or any other damages, inconveniences, costs or expenses. The Bidder/Buyer agrees to assume all responsibility and risk regarding the safety, suitability of use and legal requirements concerning ownership, storage, installation, operation and use of the Item and to hold Seller harmless and free of all liability regarding the safety, condition, usability, installation, use, maintenance, disposal, legality and suitability of use and any other issues regarding this Item. Item is a commercial and industrial industrial use product intended for installation and use by qualified personnel and can cause injury or damage if improperly used or installed. Proper and safe installation and operation is the sole responsibility of the Buyer. Buyer is urged to consult the original manufacturer of the equipment in which the Item will be used for installation, safety, maintenance and operating instructions which may also be available online at the manufacturer’s website. In any and all cases, Seller’s liability is limited to the amount of the winning bid paid and does not include any direct, indirect, incidental or miscellaneous damages, or any other damages, inconveniences, costs or expenses. Please contact us by email if you have any questions or need clarifications on the listed information. Please include the listing number or description in your email. Note that if you wait until the last day, we may not be able to get back to you before the auction closes. We will do our best to answer all questions accurately and promptly. We greatly value our customers and our reputation and will work diligently with customers to achieve our goal of mutual satisfaction and positive feedback on every transaction. Buyer pays shipping cost as stated. USPS First Class Mail and USPS First Class Mail International are our shipping methods of choice for this Item. If paying by PayPal, we will ship to the address associated with the PayPal payment unless prior arrangement is approved by us. If paying by other than PayPal, please send your shipping address including zip code and delivery contact phone number as soon as you are notified that you are the winning bidder. Payment via PayPal is preferred. Major credit cards accepted through PayPal. VISA / MC also accepted via our own merchant account (for security pls. CALL us w/ CC info – DO NOT EMAIL CC INFO). Payment upon pick-up is acceptable w/ prior notice. International customers must pay in USD$ only. Contact us immediately if you have any questions regarding payment options. We make every effort to ship within 3 business days after payment is received. If payment is not received within 7 days after email notification to Buyer of amount due, transaction is subject to being reported as failed for non-payment and the Item being sold to another buyer. Please contact us as soon as possible if you have questions regarding payment. WE SHIP INTERNATIONALLY but, due to delivery problems, not to some locations. Bidders in a location that we do not show a shipping option for, please contact us BEFORE bidding. TO OUR INTERNATIONAL CUSTOMERS: ALL INTERNATIONAL customs clearances and import taxes and fees are the sole responsibility of the Buyer at destination. Re-shipping of items returned to us as undeliverable by foreign post authorities will require re-payment of shipping costs to re-ship. Thank you for considering our products!