M6 M8 M10 M12 M14 M16 Aluminium 6061 Threaded Rods Metric Thread Stud Bolts
Item: M6 M8 M10 M12 M14 M16 Aluminium 6061Threaded Rods Metric Thread Stud Bolts System of Measurement: Metric Threaded Rod Thread Type: Metric Coarse Threaded Rod Material: Aluminium
Chamfered Square Nuts DIN 557 Stainless Steel A2 18-8 Metric Coarse M5 M6 M8 M10
Stainless Steel Metric Square Nuts (DIN 557). These have a A2-70 / 18-8 Grade rating and are all in standard metric coarse thread. Available Sizes : M4 (4mm x 0.70), M5 (5mm x 0.80), M6 (6mm x 1.0), M8 (8mm x 1.25), M10 (10mm x 1.50)
Fine Thread Socket Head Cap Screws Allen Bolt M6 M8 M10- A2 304 Stainless Steel
Stainless Steel Flat Head Socket Screws DIN 7991 Metric M2.5 M3 M4 M5 M6 M8
Metric Stainless SteelFlat Head Socket ScrewsDIN 7991 in sizes M3, M4, M5, M6, and M8by Desmoparts High quality Metric Stainless Steel Flat Head Socket Screws of various diameter and lengths shipped from Houston, TX. On a flat head screw the length is measured from end to end. Select screws in packs of 10 or 100 pieces. Most of our flat head screws are stamped with a head markings and only a very small percentage are blank. We’ve learned that some customers want screws without head markings. We’ll be happy to check our inventory to determine if the head style we have in stock matches your needs. Just message us. Our other items we have Button, Cap, Hex, and Low Cap Socket screws. We figured after two decades of selling stainless steel screw kits on eBay that it was about time to offer individual screws to customers. Since 2000 Desmoparts has been selling stainless steel metric screw kits for motorcycle makes such as BMW, Ducati, Honda, Yamaha, Moto Guzzi on eBay. We have millions of pieces of European-produced grade 316 stainless steel hardware in our Houston shop available in small quantities direct to your door. All of our screws are socket head (allen head) metric. We figured after two decades of selling stainless steel screw kits on eBay that it was about time to offer individual screws to customers. Desmoparts Metric Stainless Steel InventoryScrews – button, cap, low cap, cap, hex, and oval. Nuts – standard, flange, nylock, and wing.Washers – standard, split, fender, nylon, and wavy. ShippingShipping is $2.50 flat per checkout no matter how many screws you purchase. You can purchase Button, Cap, Low Cap, Hex, and Flat and pay just the one shipping and handling fee.
Kontes Ultra-Ware 40/35 47mm Glass Fritted Support Base Microfiltration Chipped
Kontes Ultra-Ware 40/35 47mm Glass Fritted Support Base Microfiltration Chipped Please Note the following:Actual Picture of UnitNo accessories provided unless pictured.If you have any questions regarding this item, please contact me _before_ bidding. Warehouse loc: R1/10/1 box Multiple items purchased will be considered for discounted shipping. Expedited shipping can be arranged upon request. All items will ship within 1 day of payment receipt. Local Pick-up is Available Please Note the following: 1. Fast shipping. 2. If you have any questions regarding this item, please contact me _before_ bidding. ——————————————– Please check SH via shipping calculator. Expedited shipping can be arranged upon request Other Notes of Interest Shipments : All items will ship within 1-2 business days of payment receipt. Please see actual pictures. There’s no other parts, manuals, software included.
Millipore XX43 047 00 Plastic In-Line Filter Holder, 47mm XX4304700
This listing is for one MilliporeSigma In-Line Filter Holder, 47mm, part number XX43 047 00, used in excellent condition. The 47 mm In-Line Filter Holder is designed for the filtration of gases or liquids at inlet pressures of up to 5.5 bar (80 psi). Its primary use is for in-line ultra cleaning of liquids or gases by pressure filtration. The unit is constructed with three hand knobs and can be opened for filter changes without disturbing the attached plumbing. The filter holder can be loaded with any pre-cut 47 mm filter. Hose connections work with 6 mm to 9.5 mm (1/4″ to 3/8″) I.D. flexible tubing. Includes two-piece filter holder body, support screen, hand knobs (3), hose connectors (2), one silicone O-ring, and six-page user guide. Specifications:Holds 42mm (1.7 in.) thick-depth prefilters or 47mm (1.9 in.) membrane prefiltersMaximum pressure: 5.5 bar (80 psi)Maximum temperature: 70 degrees C (158 degrees F) at 5.5 barFilter size: 47 mm (1.9″)Prefilter size: 42 mmFilter area: 13.8 cm^^2Inlet/Outlet Connections: 1/4″ NPTF with stepped hose connectors, 6 – 9.5 mmDimensions: approx. 3″ diameter x 5″ thick (76 cm x 26 cm)Weight: 0.25 lb. (120 gm)Filter holder body: Filled polypropyleneO-ring: siliconeWe offer a 30-day no-hassle satisfaction guarantee. Please contact us with any questions, and thanks for your interest!