Kingsley Evans Logo

Item Tag: Plastic

500-LG 6.5×10.5″ POLYOLEFIN Shrink Bag Wrap (Smell Thru Plastic)

This is for a box of 500 crystal clear polyolefin shrink bags in 6.5″ x 10.5-11″. The opening is on the 6.5″ side. This gigantic size bag is great for all kinds of large items like 4″ Big Daddy Bath Bomb. You can also seal these lengthwise to make long tubes or smaller sections. FYI: Sometimes we send these without the box if the shipping is significantly cheaper without the box. They’ll be slid into a ziplock bag in this case. (Most often international shipments.) ABOUT POLYOLEFIN:Polyolefin is a softer plastic than PVC. It shrinks without sharp edges and it’s ideal for bath & body products. Polyolefin protects products from the elements, dust and contamination, but your customers can still SMELL the product through the packaging. Just give your item 24 hours after shrinking to be able to smell it through the plastic. It takes a day or so for the scent to work it’s way through the plastic. This plastic is considered food safe as well. It’s a great product and it’s what we use on all our soaps, bath bombs, bubbly bath bars and more. Sometimes we tie off the end and use it as a bag for items we don’t want shrink wrapped. Polyolefin shrinks easily and without the noxious fumes of PVC. It’s the ideal shrink bag for bath stuff! INSTRUCTIONS FOR USE- use an impulse sealer to seal the excess bag off, then shrink with a heat gun starting at the corners and seams, moving quickly so you don’t burn through. Don’t focus heat on the flat surfaces or they’ll burn through. Tighten seams and corners first and be quick over flat spots. It takes a little practice to figure it out, but the result is a clean, professional looking shrink wrap when you do! YouTube has how-to videos as well. TIP: We like Jorestech brand impulse sealers with the metal housing and Wagner 1200-1500watt heat guns. Both are available on Amazon. *Bath bombs above are just an example of items we shrink wrap using these bags. These bath bombs are not included in this listing. Visit us at at www.twowildhares.comInstagram – twhsoapand www.facebook.com/twowildhares

Great Value Deluxe Toilet Plunger 16″ Ergonomic Plastic Handle

The end of the blocked toilet plunger is constructed with a protruding lip to give you superior suction when compared to the ones without this feature. Plus, this 1-each Great Value Deluxe Toilet Plunger with Ergonomic Plastic Handle is made of 100-percent rubber and polypropylene plastic for reliability and long life.

South Bend 9/10K metal lathe carriage Dial Indicator Holder! Clasp Type

Lathe Sculpted Dial Indicator Holder with Automatic Internal Probe Retention Clasp! Stylish and Smart design!Fast and Easy X-axis position adjustment with turn of a knob!Quickly remove or install Dial indicator in holder, automatic clasp retention!No “tools or wrenching” required! Fits these lathes: South Bend 9 (A,B,C)South Bend 10k 3d Printed sculpted dial indicator recess with automatic internal retention clasp! DOES NOT NOT NOT INCLUDE THE DIAL INDICATOR!!!!DOES NOT NOT NOT INCLUDE THE DIAL INDICATOR!!!!DOES NOT NOT NOT INCLUDE THE DIAL INDICATOR!!!! This is a 3dprinted “indicator stop” which I developed and tested on my South Bend 10K lathe. This is a high quality 3dPLASTIC part which is BETTER AS PLASTIC than metal stops because it does the job and WILL NOT DAMAGE YOUR LATHE WAYS!It cannot scratch the way and IF accidentally OVERRAN it will simply slide on the way WITHOUT DAMAGE! Automatic Indicator Probe Retention Clasp: This stop uses a “tension adjustable” internal clasp to allow the user to SET ONE TIME the desired tension on the internal Clasp.Then the Dial Indicator Probe can be installed and removed “Without ANY adjustment or fiddling with a retaining screw”! VERY HANDY! The below video is a demonstration showing the use of a simple carriage stop with a dial indicator (The holder in the video had the EXTERNAL probe retention screw). This allows setting so that as the carriage reaches a particular location, the operator can witness the position using the dial indicator and disengage or stop the carriage. It is best to set a position of the stop so that when the carriage reaches the dial indicator probe, the advancement to final position is approximately 1 dial turn or less. This makes it easy to “know” when you are about to see the correct “0” point to stop the carriage feeding. It was very easy to stop within 0.005 – 0.010″ of a position. This allows you to “manually” advance the carriage to finish the cut if desired. This indicator works very good. I made this to help me turn a backing plate for a new chuck.It was fantastic and easy to repeat many cuts and STOP within a few thousands of an inch from a preset location.This is great for internal boring and thread cutting or any other time you need a PRECISE advance of the lathe carriage. NOTE: This does NOT automatically stop your carriage. The operator MUST manually stop or disengage the carriage feed when desires. The “dial indicator” (NOT SUPPLIED) provides a precise position for carriage stop. DOES NOT NOT NOT INCLUDE THE DIAL INDICATOR!!!! Video click below image!Video is of another model of stop offered in another listing I have.You will be purchasing the Dial Indicator Stop Holder pictured in “THIS LISTING”! NOT THIS VIDEO!(does not have dial indicator retaining screw installed) South Bend 9/10K lathe carriage stop Indicator – YouTube Video will open in a new window Using the eBay App? Paste link into a browser window:[isdntekvideo]