BLUFF 20EP66 Edge of Dock Leveler,20000 lb.,88 in. W 32KL26
Please Read Please Read Returns Terms of Sale Export Terms Additional Please Read ATTENTION International/Non-US customers:We cannot ship to a PO Box. We ship via DHL and require a physical location to deliver to. Please provide a complete physical address in English, with a valid phone number, and valid Contact name for Delivery.Shipping fees are charged during eBay Checkout. Duties and Taxes, if applicable, are charged by your local government, and will be collected by DHL at the time of Delivery. Please expect a phone call or email from DHL to arrange delivery and collection of Duties and VAT/sales tax.These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. Returns Returns Returns are Fast and Easy. We accept returns within 30 days of when your order is delivered. Go to your order on Ebay.com and click on “Request Return”. Terms of Sale Terms of Sale TERMS of SALE I. GRAINGER STANDARD TERMS AND CONDITIONS Please read these terms and conditions carefully. They contain important information concerning customer?s (?Customer?) legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer?s satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. 2. Sales Tax. Customer is responsible for payment of all applicable state and local taxes. 4. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. 5. Modification of Terms. Grainger?s acceptance of any order is subject to Customer?s assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger?s acknowledgment, or from Customer?s acceptance of all or any part of the products ordered. No additions or modifications of Grainger?s terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. If a purchase order or other correspondence submitted by Customer contains terms or conditions contrary or in addition to the terms and conditions contained herein or in Grainger?s acknowledgment, Grainger?s fulfillment of any such purchase order shall not be construed as assent to any of the terms and conditions proposed by Customer, and will not constitute a waiver by Grainger of any of the terms and conditions contained herein or in Grainger?s acknowledgment. Grainger reserves the right to accept or reject any order. Grainger reserves the right to limit the total quantity of items purchased per order and the number of individual orders placed per Customer per day. 6. Complete Agreement. The terms and conditions in: (i) Grainger?s forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. 7. Authorization. Business Customers represent that any person accepting these Terms of Sale on behalf of the Business Customer is authorized to do so and that all employees and representatives of the Business Customer who access grainger.com or any other Grainger website or application on behalf of the Business Customer or otherwise purchase products from Grainger on behalf of Business Customer have the legal right, and are duly authorized, to make such purchases and further authorized to enter into agreements relating to the purchase of products or services or to obtain pricing or discounts from Grainger on behalf of Business Customer. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. Export Terms Export Terms ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS (?ADDITIONAL EXPORT TERMS?). IN THE EVENT OF A CONFLICT BETWEEN GRAINGER?S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. 1. Order Acceptance. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U.S. affiliates and divisions, at a continental U.S. facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U.S. and of the State where acceptance occurred in the U.S. 2. Sales Tax and Duties, Import Fees. Grainger is required to charge U.S. federal, state, local tax, applicable duties, and import fees on products, or for providing a valid exemption certificate. Customer assumes responsibility for, and unconditionally guarantees payment or reimbursement of, all applicable taxes, fees, licenses, import duties, and expenses as may be applicable. When placing an order, Customer shall indicate which products are tax exempt. 3. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U.S. government restricted parties lists, including without limitation, the U.S. Commerce Department Bureau of Industry and Security (?BIS?) Denied Persons List; Entity List or Unverified List; the U.S. Treasury Department Office of Foreign Assets Control (?OFAC?) Specially Designated Nationals and Blocked Persons List; or the U.S. State Department Directorate of Defense Trade Controls (?DDTC?) Debarred Parties List. Customer shall comply with all applicable U.S. economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations (?EAR?) administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. 4. Foreign Principal Party in Interest; Freight Forwarder and Documentation. It is specifically agreed that Customer shall be the foreign principal party in interest (?FPPI?) and/or that its freight forwarder shall act as Customer’s agent in such capacity for purposes of the Foreign Trade Regulations or other regulatory purposes, and Customer and its freight forwarder are responsible for all routed export transactions documentation, including but not limited to the filing of the required Electronic Export Information/Automated Export System records. At Grainger?s request, Customer or its freight forwarder shall provide copies of any export, shipping, or import documentation prepared by Customer or its freight forwarder related to sales to Customer by Grainger. In the event a license is required for export from the U.S., then (i) Grainger reserves the right to select its own freight forwarder to facilitate and file the export license; or (ii) the FPPI will provide Grainger written notice that it expressly assumes responsibility for determining licensing requirements and obtaining the license, thereby making the U.S. agent of the FPPI the exporter of record for purposes of meeting EAR requirements. 6. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U.S. and importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations. Any commodities, technology and software will be exported from the U.S. in accordance with the U.S. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U.S. law is prohibited. If requested by Grainger, Customer shall provide documentation satisfactory to Grainger verifying delivery at the designated country, the identity of end users ordering products from Customer and the terms and conditions upon which such end users request products to be supplied. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U.S. export laws and regulations for export, unless Grainger expressly agrees to do so. 7. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U.S. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. 8. Governing Law; Limitations. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U.S., including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. Notwithstanding the foregoing, any legal action by Customer with respect to any transaction must be commenced within one (1) year after the cause of action has arisen. Additional Additional
NOS Military Shackle 3/4″ MS70087-2 4030006788562 PS70087-2 1656-350 20000-lbs
This listing is for one New Old Stock NOS Military Shackle 3/4″ MS70087-2 4030006788562 PS70087-2 1656-350 20000-lbs As you can see from the picture, the last two sold will not have bolts included. “Make Offer” option is for multiple orders only. Opening Width 2.313 inches minimum and 2.437 inches maximum Inside Length 4.625 inches minimum and 4.875 inches maximum Eyelet Style Round plain END Condition Threaded Material Diameter 0.750 inches nominal Closure Head Style Hexagon Special Features Proof load 20000 lbs, screw cap MS90727-197, nut MS35691-61 Material Steel comp 4130 or steel comp 4140 Material Document AND Classification FED-STD-66 fed std single material response Surface Treatment Phosphate Surface Treatment Document AND Classification MIL-P-16232 ty 2 cl 4B mil spec single treatment response and MIL-W-3688 mil spec single treatment response Style Designator Anchor If you have any complaints about your order please let us know. Your satisfaction is one of our top priorities!!! Most of our inventory comes from surplus lots. Item will be shipped upon payment being received. We accept payment only through Paypal. We ship primarily to the United States and it’s territories, but buyers can inquire about international shipping rates. Returns accepted within 14 days. Buyer pays return shipping unless there is a mistake on our end with the listing or the product is damaged/defective. Thank you for your interest in this listing! -Checkerboard Farm & Surplus- Powered by eBay Turbo ListerThe free listing tool. List your items fast and easy and manage your active items.
SCALE MONITOR WEIGH TRUCK FLOOR HOPPER TANK CAKE FEEDER REPLACEMENT CONVERSION
Have a question? Need a recommendation? Not sure which scale or load cell to buy? CLICK HERE to see my contact info.BRAND NEW! Will work with essentially any load cell scale system of up to 4 load cells. Features: Features:Full 1 year manufacturers warranty. Newest model and comes with a 5 pin connector, see photos.Powered by 3 x AAA batteries or A/C 110 volt power plug (both included).OP 902, LP 7515 are interchangeable models and all have the same features & functions.Low battery signal. 6 x 0.7 inch high LCD digits.LB/KG switchable. Capacity of up to 999,999.Can read 100% of capacity in positive and negative. Auto power off (select 10, 30, 60, 90 minutes, or always powered on). Back light (selectable) Animal weighing mode. Peak hold function.100% zero range. Auto hold function.Hold timer function (selectable). Zero/tare function.Net, gross weighing modes. Will run up to 4 x 350 ohm load cells through a junction/summing box (available separately). Operating temp of -14 to +104 degrees Fahrenheit. 5,000 graduations.Pin configuration clockwise from 12:00 = 1 +EX, 2 +SIG, 3 -SIG, 4 -EX,5 ground/shield. RS232 port (no tech support, see note below). Printer ready (no tech support, see note below).NOTE ON TECH SUPPORT: An RS 232 port for connecting to your computer or your printer is included but it requires software and/or programming by a technician for complete functionality. I do not provide this. I only support printers and software made by the manufacturer. “Plug and play” printers and software programs are available for this type of scale system. Contact me for details.I offer a full line of scales. From 0.0000001 gram ultra micro balances to 100,000 LB 100 foot long truck scales to $10 pocket scales. My business is scales and only scales. Buy your scale from someone that knows what they’re doing. If you don’t see what you’re looking for or have any questions just contact me. Customer Service: Customer service is VERY important. I return EVERY phone call and answer EVERY email. When you contact me you will speak directly with the owner. If I’m not available make sure to leave a message, I will return your call quickly, usually within an hour. Emails are also answered promptly. I am here for my customers from before the sale until you are completely satisfied. If you have any problems at all I will do everything I can to make it right with you. Availability/Stock: I do my absolute best to make sure everything I sell is in stock, but occasionally a manufacturer does not tell me when something sells out. If you want to be 100% sure an item is available please contact me prior to ordering. Shipping: I ship within 24 hours of receiving payment. I use UPS, US Mail, and FedEx depending on cost & shipping time. Local pick up, expedited, and international shipping are available for all my items. Please contact me for more info. Payment: Payment is due within 7 days. I accept Paypal and all major credit cards. For large orders wire transfers are also available.Order Processing: I process orders immediately. Once you see that I’ve left you positive feedback your order has been processed. Orders paid for and processed before 12 PM eastern time are usually shipped the same day. Defective Items: All of our products are tested before they leave the factory, but occasionally damage will occur during shipment. If you receive a defective product please contact me ASAP and I will send you a replacement at no cost.Returns: Returns cost me money. You must contact me before returning any items to obtain a return authorization number. Any return may be subject to a minimum 10% restocking fee. All returns must be returned in new condition (NO marks, scratches, tape, damage, etc.). All packaging material must be included and in new condition (this includes boxes, wrappers, manuals, protective styrofoam, etc.). Items returned in anything other than new condition will be subject to a minimum 30% re-stocking fee. Items sent back without a return authorization or in damaged condition will be sent back to the customer without exchange or refund. Shipping costs are non-refundable, this includes items which are sold with “free” shipping.By purchasing this item you agree to these terms and conditions.
NEW DIGITAL SCALE DISPLAY HEAD MONITOR LOAD CELL TRUCK FLOOR ANIMAL WEIGHING BOX
Have a question? Need a recommendation? Not sure which scale or load cell to buy? CLICK HERE to see my contact info.BRAND NEW! Will work with pretty much any load cell scale system of up to 4 load cells. Features: Features:Full 1 year manufacturers warranty. Powered by 3 x AAA batteries or A/C 110 volt power plug (both included).Newest model and comes with a 5 pin connector, see photos.OP 902, LP 7515 are interchangeable models and all have the same features & functions.Low battery signal. 6 x 0.7 inch high LCD digits.LB/KG switchable. Capacity of up to 999,999.Can read 100% of capacity in positive and negative. Auto power off (select 10, 30, 60, 90 minutes, or always powered on). Back light (selectable) Animal weighing mode. Peak hold function.100% zero range. Auto hold function.Hold timer function (selectable). Zero/tare function.Net, gross weighing modes. Will run up to 4 x 350 ohm load cells through a junction/summing box (available separately). Operating temp of -14 to +104 degrees Fahrenheit. 5,000 graduations.Pin configuration clockwise from 12:00 = 1 +EX, 2 +SIG, 3 -SIG, 4 -EX,5 ground/shield. RS232 port (no tech support, see note below). Printer ready (no tech support, see note below).NOTE ON TECH SUPPORT: An RS 232 port for connecting to your computer or your printer is included but it requires software and/or programming by a technician for complete functionality. I do not provide this. I only support printers and software made by the manufacturer. “Plug and play” printers and software programs are available for this type of scale system. Contact me for details.I offer a full line of scales. From 0.0000001 gram ultra micro balances to 100,000 LB 100 foot long truck scales to $10 pocket scales. My business is scales and only scales. Buy your scale from someone that knows what they’re doing. If you don’t see what you’re looking for or have any questions just contact me. Customer Service: Customer service is VERY important. I return EVERY phone call and answer EVERY email. When you contact me you will speak directly with the owner. If I’m not available make sure to leave a message, I will return your call quickly, usually within an hour. Emails are also answered promptly. I am here for my customers from before the sale until you are completely satisfied. If you have any problems at all I will do everything I can to make it right with you. Availability/Stock: I do my absolute best to make sure everything I sell is in stock, but occasionally a manufacturer does not tell me when something sells out. If you want to be 100% sure an item is available please contact me prior to ordering. Shipping: I ship within 24 hours of receiving payment. I use UPS, US Mail, and FedEx depending on cost & shipping time. Local pick up, expedited, and international shipping are available for all my items. Please contact me for more info. Payment: Payment is due within 7 days. I accept Paypal and all major credit cards. For large orders wire transfers are also available.Order Processing: I process orders immediately. Once you see that I’ve left you positive feedback your order has been processed. Orders paid for and processed before 12 PM eastern time are usually shipped the same day. Defective Items: All of our products are tested before they leave the factory, but occasionally damage will occur during shipment. If you receive a defective product please contact me ASAP and I will send you a replacement at no cost.Returns: Returns cost me money. You must contact me before returning any items to obtain a return authorization number. Any return may be subject to a minimum 10% restocking fee. All returns must be returned in new condition (NO marks, scratches, tape, damage, etc.). All packaging material must be included and in new condition (this includes boxes, wrappers, manuals, protective styrofoam, etc.). Items returned in anything other than new condition will be subject to a minimum 30% re-stocking fee. Items sent back without a return authorization or in damaged condition will be sent back to the customer without exchange or refund. Shipping costs are non-refundable, this includes items which are sold with “free” shipping.By purchasing this item you agree to these terms and conditions.
American Made Safety Valve Fits Coleman Powermate 136-0007 136-0007RP
We, Sellerocity, guarantee this valve for a period of SIX Months and promise zero hassles in the case of product failure. *Please contact Sellerocity directly (not eBay) should there be a warranty issue or need to return your purchase.* (via “Contact seller” within this listing’s “Seller information” window)* …Sellerocity… About Us: We are a husband and wife team. Two things set us apart: First, we are incredibly easy going and understanding. We are NOT a large heartless company only concerned with pinching pennies. Your continued business and our reputation are very important to us. Second, we package with great care. We know how frustrating it is to receive an item only to find that it has been damaged during transportation. We assume that the postal system will abuse the package so we pad and package accordingly. Should there ever be a mishap with the product or shipping please contact us immediately. We respond quickly and take pride in resolving customer issues so that we have a lifelong customer. Shipping & Handling: We offer free shipping within the continental US, via the USPS in most cases. Please allow 24 hours for handling. First class shipping (Under 1 lb) can take 4-6 business days. Priority Mail (For packages over 1 lbs) typically takes 2-4 business days. Multiple orders going to the same location will be combined whenever possible. Return Policy: 30 Days from the delivery date. Depending on the circumstances we may have to charge a restock fee of no more than 15%. If we make a shipping mistake we will gladly reimburse you or send a return label. Warranty considerations should be returned to us so we can test the product. Please try not to use or modify the item being returned. *Please contact Sellerocity directly (not eBay) should there be ANY PROBLEM WHATSOEVER!* (via “Contact seller” within the “Seller information” window). We look forward to providing you with FIVE-STAR service and hope you’ll allow us to rectify any issue before leaving feedback of less than FIVE STARS ***** – Your 100% happiness is our goal! Taxes: Taxes are assessed by eBay as per state laws. (: Happy eBaying! 🙂
Ultradent Ultrapak Size #00 Gingival Retraction Cord 136
Ultrapak #00 Retraction Cord Plain Knitted, 8ft (96″) cord per bottleREF: 136This listing is for 1 bottle ************ Distributed By DENTISPAL************* Established in Chicago, DENTISPAL dedicates to providing high quality dental products for dentists. We currently focus on disposable dental products covering a variety of categories such as Infection Control, Preventive, Cosmetic, Evacuation, Impression, Endodontic and X-Ray Accessories. SHIPPING: Free & Fast Shipping across Continental U.S.A. PAYMENTS: Paypal. All major credit cards accepted through paypal. RETURNS: We accept returns within 14 days from the date of delivery. Buyers pay return shipping unless the item is defective. Disclaimer : “The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.”