#12 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel
#12 Hex Washer Head Self Drilling Sheet Metal Screws 410 Stainless Steel Choose your Length and Quantity Fastenere Self-Drilling Screws, also known as Tek screws, eliminate the need for a pre-drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. These sheet metal screws are highly versatile and are used to attached metal, wood, fiberglass and plastic. The sharp threads draw material together and ensure a secure hold. General Product Information Head Style : Hex Washer Drive Style : External Hex Drive Size : 5/16″ Screw Size : #12 Length : Select Desired Length in Drop Down Menu Quantity of Fasteners in Package : Select Desired Item Package Quantity in Drop Down Menu Detailed Product Information: Head Width Flat to Flat : 5/16″ Flange Diameter : 0.432″ Head Height : 0.194″ Thread Diameter : 0.216″ Thread Coverage : Full Thread Point Style : Self Drilling Drill Point size : #3 (9/32″) Max Drilling Thickness : 0.187″ Key Notes: Hex washer head self drilling screws have a drill point at the tip of the thread drills its own pilot hole in to metal allowing for quick installation and fastening while saving time and effort with just a single step Made from an ultra strong stainless steel grade 410 giving them the ability to drill through sheet metal and stainless steel while still being wear resistant and offering a mild chemical corrosion protection; these screws are not intended for use with aluminum as the higher iron content in the fastener will cause embrittlement; 410 Stainless steel is always MAGNETIC due to the higher iron content giving the drilling capabilities These screws have a hex head that can be driven with a nut driver or socket and can be adjusted with a wrench; the built in flanged washer adds a secure grip to the material being fastened into while also preventing the head from crushing thin metal The self drilling point also referred to as a tek can self drill metal up to a thickness of 0.187 inches and is best used with a lot of pressure and a slow drill speed; if drilling too fast you could run the risk of over heating the metal drilling tip which could cause it to wear out or warp Fastenere brand self drilling tapping screws will tap their own thread into the material being screwed into creating a long lasting vibration resistant connection that is the choice for use with corrugated roof siding and sheet metal applications Shipping: All orders placed before 3:30 pm EST Will Ship Same Day Tracking is provided on ALL Orders Priority Mail Shipping service is offered at a discount of only $3.95 UPS Ground UPS Next Day Air is available, Please inquire for pricing Returns : ALL returns are accepted if returned within 60 days. Money Back or exchange guaranteed. NO Restocking Fees. For YOU, we constantly strive to find ways of improving our performance.
#8 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel
#8 Hex Washer Head Self Drilling Sheet Metal Screws 410 Stainless Steel Choose your Length and Quantity Fastenere Self-Drilling Screws, also known as Tek screws, eliminate the need for a pre-drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. These sheet metal screws are highly versatile and are used to attached metal, wood, fiberglass and plastic. The sharp threads draw material together and ensure a secure hold. General Product Information Head Style : Hex Washer Drive Style : External Hex Drive Size : 1/4″ Screw Size : #8 Length : Select Desired Length in Drop Down Menu Quantity of Fasteners in Package : Select Desired Item Package Quantity in Drop Down Menu Detailed Product Information: Head Width Flat to Flat : 1/4″ Flange Diameter : 0.348″ Head Height : 0.141″ Thread Diameter : 0.164″ Thread Coverage : Full Thread Point Style : Self Drilling Drill Point size : #3 (1/4″) Max Drilling Thickness : 0.150″ Key Notes: Hex washer head self drilling screws have a drill point at the tip of the thread drills its own pilot hole in to metal allowing for quick installation and fastening while saving time and effort with just a single step Made from an ultra strong stainless steel grade 410 giving them the ability to drill through sheet metal and stainless steel while still being wear resistant and offering a mild chemical corrosion protection; these screws are not intended for use with aluminum as the higher iron content in the fastener will cause embrittlement; 410 Stainless steel is always MAGNETIC due to the higher iron content giving the drilling capabilities These screws have a hex head that can be driven with a nut driver or socket and can be adjusted with a wrench; the built in flanged washer adds a secure grip to the material being fastened into while also preventing the head from crushing thin metal The self drilling point also referred to as a tek can self drill metal up to a thickness of 0.150 inches and is best used with a lot of pressure and a slow drill speed; if drilling too fast you could run the risk of over heating the metal drilling tip which could cause it to wear out or warp Fastenere brand self drilling tapping screws will tap their own thread into the material being screwed into creating a long lasting vibration resistant connection that is the choice for use with corrugated roof siding and sheet metal applications Shipping: All orders placed before 3:30 pm EST Will Ship Same Day Tracking is provided on ALL Orders Priority Mail Shipping service is offered at a discount of only $3.95 UPS Ground UPS Next Day Air is available, Please inquire for pricing Returns : ALL returns are accepted if returned within 60 days. Money Back or exchange guaranteed. NO Restocking Fees. For YOU, we constantly strive to find ways of improving our performance.
Stainless Steel Sheet Metal Tapping Screws Pan Head Grade 18-8 Quantity 50 pc
Item Description Sheet metal screws have large threads for use in sheet metal sometimes also used in plastic, fiberglass, or wood. Pan heads are slightly rounded with short vertical sides. Sheet metal screws or tapping screws are designed to bind sheet metal to wood and sometimes fiberglass. Manufactured with a sharper, more pronounced thread that allows the screw to better tap or penetrate metal surfaces. Body Diameter Dimensions in Drop Down Body Length Under Head Select Length in Drop Down Menu Minimum Thread Length Fully Threaded Maximum Thread Length Fully Threaded Head Diameter #0 = 0.116″ / #2 = 0.167″ / #4 = 0.219″ / #5 = 0.245″ / #6 = 0.270″ / #8 = 0.322″ Head Height #0 = 0.044″ / #2 = 0.062″ / #4 = 0.080″ / #5 = 0.089″ / #6 = 0.097″ / #8 = 0.115″ Drive Style Select your Drive Style in Drop Down Menu Material 18-8 Stainless Steel Tensile Strength 100,000 – 125,000 PSI Yield 55,000 – 75,000 PSI Package Quantity 50 Quantity Package of Sheet metal Tapping Screws
Box of 100 #8 Stainless Steel Phillips Pan Head Sheet Metal Screws #8 x 1/2″
#14 Hex Washer Head TEK 3 Self Drilling Screws Strong Shield Coated – All Length
Add Albany County Fasteners to your Favorites and receive our email newsletters about new items and special promotions! General Interest #14 Hex Washer Head TEK 3 Self Drilling Screws Strong Shield Coated PRODUCT SPECIFICATIONS Item Condition: New Brand: Albany County Fasteners Fastener Type: Self Drilling Screw Drive Style: External Hex Head Style Hex Washer Head Grade/Material: Carbon Steel Thread Diameter Major: #14 (0.246″) Thread Diameter Minor: #14 (0.192″) Thread Pitch: 14 Threads Per Inch Point Type: TEK 3 Finish: Strong Shield Coating Wrench Size: 3/8″ Specifications Met: ASTM C 1513 & ASTM A 510, F.I.P.-1000.7, SAE J78 #14-14 STRONG SHIELD HEX WASHER HEAD SELF DRILLING SCREWS Strong-Shield Coating | TEK-3 #14-14Hexagon drive for use with a wrench or socket Fully Threaded from tip to head Integral washer at the top of the head to minimize chance of pull-throughWasher portion of screw distributes pressure over a larger surface area TEK 3 Point used for drilling into structural steel Strong-Shield Coating: High corrosion resistance Protection from acid rain & rust Works with ACQ treated lumber Exceeds 1,000/hrs. salt spray resistance Payments We accept payments through eBay checkout, PayPal, Skrill/MoneyBookers or ProPay. You can make payment with your credit or debit card through eBay checkout. Preferred Method: PayPal Shipping Free standard shipping to all 50 States. All packages shipped with invoice of the order. ALL Orders containing 4 or more unique items will be upgraded to ship via Priority Mail for FREE. Handling Time: 1 day handling Monday through Friday after cleared payment for all in stock products. We only ship Monday through Friday excluding all holidays. International Shipping: We ship under the eBay Global Shipping Plan and your items are combined into one order through eBay checkout. All items are combined into one box not to exceed 12 items and 66 lbs and are shipped to an eBay USA central location, and then forward to your country. Under the Global shipping plan, eBay collects all shipping and customs fees up front and is handled by eBay. For all orders outside of the Global Shipping Plan, please contact us for a rate before purchasing. All customs delays, fees and duties are born and paid by the buyer. We cannot control customs thus AlbanyCountyFasteners-NY takes no responsibility for delay in the delivery of your package. In addition, should we miss calculate the shipping cost, AlbanyCountyFasteners-NY will contact the buyer before shipping the products for all additional costs. Should the buyer not pay the additional requested costs, we will refund your total purchase and void your order. Product Packaging To “go green” and reduce our use of plastic all product quantities will be packaged in as few packages as possible. Returns Returns are accepted for 30 days for Domestic orders and 14 days for International orders from purchase date by contacting us for a RMA number. Buyer pays return shipping and insurance costs. Returned open packages will be subject to partial refunds. Please Note: Returns, cancellations or exchanges must be completed using eBay’s formal return or Cancellation Process. Once an order has been placed, Returns, Cancellations or substitutions cannot be made through buyer/ direct messaging. Listing Photos Listing photo is generic for the fastener type listed in this listing and is not to scale. Please refer to the description for fastener details. If in doubt, please ask a question through chat or email. We will respond with the requested information quickly. Contact Us You may contact customer service M-F 8AM to 5PM Standard Eastern Time. All rights reserved copyright photos, listing, headings and descriptions.
#12 Tek Screws – Indent HWH Hex Washer Head Unsloted Zinc #3 Point Self Drilling
New Brighton-Best Proferred® #12 Indent Hex Washer Head (HWH) UnSlotted Self-Drilling Sheet Metal Screws with a #3 Point. These are Premium Steel screws with Zinc coating (Cr+3 RoHS compliant). Diameter : #12 / 0.216″Thread Pitch : 14Length : Please select from drop down menu above.Manufacturer, Product Line : Brighton-Best, Proferred®Drive : External Hex, 5/16″Material, Plating : Steel, Zinc Cr+3Type : Sheet Metal Screw, Self-DrillingSystem of Measurement : Inch / USSpecifications : ASME B18.6.3, IFI-113Head Diam (Max, Min) : Max 0.432″, Min 0.398″Head Height (Max, Min) : Max 0.194″, Min 0.161″Washer Thickness (Max, Min) : Max 0.039″, Min 0.022″Width Across Flats : 5/16″ (Hex Drive size)