M10-1.25 x 100 Socket Allen Head Cap Screws 10mm x 100mm M10x1.25 x 100 Bolt
Listing is for one piece M10x1.25×100 12.9 SHCS with zinc plating. Has been baked to reduce likelihood of hydrogen embrittlement. Threads have been checked for cleanliness with a threading die. M10 flat or lock washer supplied upon request.
M10-1.5×100 Stainless Socket Allen Head Bolts M10x1.5 x 100 Screw 10mm 1.5 100mm
Socket Head Cap Screws / Bolts. Head Height:9.64mm ~ 10mm. Hex Key / Allen Wrench Size:8mm. Thread Pitch:1.5 (Coarse Thread). Thread Length:35mm. Bolt Specs (L) Bolt Length:100mm. Material:Stainless Steel.
7/16-14 x 2-1/2 Socket Allen Head Cap Screws Stainless 7/16×14 x 2.5 Bolts
Welcome To RiverCity Fastener & Supply!And Remember.Don’t get screwed by our competition!Sold by Rivercity Fastener & SupplyWith a simple internet search of our Ebay user name and you can easily find us.RivercityFastenerSupplyBuyers must first add items to their eBay Shopping Cart to purchase multiple items with a single payment.Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. 18-8 stainless steel screws in metric sizes are also known as A2 stainless steel screws. Length is measured from under the head.You will get the following:Socket / Allen Head Cap Screw / BoltSize: 7/16-14×2-1/2Screw Specs:(D) Screw Diameter: 7/16Thread Pitch: 14Screw Length: 2-1/2″Thread Length: 1-9/16 Hex Key / Allen Wrench Size: 3/8 (K) Head Thickness / Height: ..43 ~ .438(H) Head Diameter: .642 ~ .656Grade: 18-8 / 304Material: Stainless SteelOther sizes are available just ask.Nuts, Bolts and Screws are measured by the Thread size NOT the Wrench Size. If you have a question about a part or need assistance with an order click on the “Contact Seller” link in the upper right hand corner of each listing. Or give us a call M-F 8am-4:30pm Central standard time. Since eBay no longer allows us to display our phone numbers in the listing please find our phone number on the internet by searching “Rivercity Fastener & Supply in Minnesota and it will bring our number right up.If any problems occur after your purchase is made, contact us before contacting eBay customer service. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be. We want your buying experience on eBay to be as smooth and pleasant as possible. Copyright © 2023-2024 Rivercity Fastener & Supply. All Rights Reserved. We are a real functioning business.eBay questions and opened item cases will be answered and dealt with during business hours by our eBay site manager. Our Business hours are Monday-Friday, 8:00 A.M. to 5:00 P.M. central standard time. Paid orders will ship Monday-Friday 8:00 A.M. to 4:00 P.M. usually within one business day excluding holidays. Copyright © 2023-2024 Rivercity Fastener & Supply. All Rights Reserved.Sold by Rivercity Fastener & SupplyRivercityFastenerSupply FREE SHIPPING ON THIS ITEM!!All items individually labeled in plastic 4 mil zip lock bagsThese are high quality fasteners that were NOT previously rejected for quality issues or rescued from a scrap yard.We only sell new unused fasteners. Looking for another size or quantity? Please e-mail or call us and we will create a listing with what you need.HAVE ANY QUESTIONS OR COMMENTS?WE ARE ALWAYS LOOKING FOR MORE AND YOUR IDEAS OF WHAT TO LIST ON EBAY.WE CARRY A FULL LINE OF METRIC AND STANDARD THREAD FASTENERS.For more tools and fasteners please view my other items.PAYMENT:An Unpaid Item Case Will Be Opened If Payment Is Not Received Within Seven day of Purchase Date.PAYPALVISAMASTERCARDDISCOVER CARDAMERICAN EXPRESSWE DO NOT ACCEPT PERSONAL CHECKS OR BUSINESS CHECKS.PAYMENT IS DUE WITHIN 1 DAYS OF THE END OF AUCTION. FEEDBACK:We maintain high standards of excellence and strive for 100% customer satisfaction! + Positive feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can address / correct your concerns.Five Star Service is Our Goal! We strive to earn 100% perfect “FIVE STAR” scores from you. The star scores are very important to us because eBay uses them to determine our visibility in search results. So, before you post permanent feedback…if anything about the transaction does not meet your expectations… please let us know and give us the chance to make things RIGHT.PLEASE VIEW OUR FEEDBACK! WE WANT ALL OF OUR CUSTOMERS TO BE HAPPY!WE LEAVE POSITIVE FEEDBACK FOR ALL OF OUR CUSTOMERS AS SOON AS WE RECEIVE YOUR PAYMENT WE WILL AUTOMATICALLY LEAVE FEEDBACK FOR YOU.IF YOU ARE NOT HAPPY WITH YOUR PURCHASE TELL US.IF YOU ARE HAPPY WITH YOUR PURCHASE PLEASE TELL OTHERS!If you do not see the size or quantity that you desire, please email me at the ASK A QUESTION for a quote on the size or quantity you would like to purchase. We will customize the order to the quantity, LARGE OR SMALL, that you desire.Copyright © 2023-2024 Rivercity Fastener & Supply. All Rights Reserved. All rights reserved copyright 2023-2024 photos, listing, headings and descriptions.All text in this listing belong to Rivercity Fastener & Supply and can not be copied or used at anytime in anyway.Copyright © 2022-2023 Rivercity Fastener & Supply. All Rights Reserved.
2 x M2.5 x 10mm S/S Socket Head Screws + 2mm Wrench. Gamo CAT/SAT Trigger Fix.
M2.5 x .45 x 10mm S/S Socket Head Cap Screws With 2mm Allen Wrench. I leave feedback for every buyer as soon as I see that payment has been processed. Once you have received your items from me, please take a minute and leave reciprocal feedback. Your honest feedback assist other buyers in deciding whether to trust me to provide a quality product. Fix your creepy, heavy Gamo CAT / SAT type trigger. I have been told a few times now that these work with the metal two stage trigger also. Condition is “New”. Ground advantage shipping is included! If you want it quicker, you can pay $4 extra for Priority Mail. Let’s face it. Trying to find metric screws in the USA isn’t great. Trying to find tiny metric bolts without buying 100 or more is a PIA! I’ll send you 2 of these (a spare or fix two triggers) and a 2mm Allen wrench for $8.50 delivered. I have the same one in my own Gamo Wildcat Whisper (the one in the pics) and it makes ALL the difference! ONLY DO THIS IF YOU ARE MECHANICALLY CONFIDENT!! I TAKE NO RESPONSIBILITY IF YOU MESS UP YOURSELF, YOUR PROPERTY OR YOUR RIFLE FITTING THIS SCREW !! Look behind your trigger to find the sear screw (see listing pics for reference). This should be a black Phillips (cross) head machine screw. Carefully remove this screw. Take your new stainless steel cap head screw and screw it in place of the original using the 2mm allen (hex) wrench supplied. Screw it in until you have about 3/16″ of threads showing, cock and load your rifle and try it out. With 3/16″ of threads showing, your trigger should be a little lighter than it originally was. If a still lighter feel is desired then go 1/4 to 1/2 a turn IN more and try again. Keep going until the desired feel is achieved. Once you feel happy with the trigger weight, again cock and load your rifle and then hit the butt of your rifle on something solid a few times. (Please do this outside) This will check that the sear is still safely engaged. IF YOUR RIFLE DISCHARGES FROM BEING KNOCKED / JARRED THEN YOUR TRIGGER IS TO LIGHT! Back off the screw 1/4 to 1/2 a turn and try again. Once your sear is safely engaged and you have a trigger you’re happy with, back the screw out approx. 10 turns (count them carefully) without fully removing it from the threads and add a small dab of thread lock about 1/8″ down from the screw head ( as shown in the pics). Purple,light hold and for less than 1/4″ or 6mm screws or blue, medium strength will work. Red, permanent will work too if you never intend to remove this screw again. It’s up to you! Thread lock is not included! I just took the picture to show you what I used myself. Turn the screw back into place, carefully counting the turns so that you get it back to the exact same setting. Test it again to check you got it back in the correct position and then leave your rifle (un-cocked and unloaded) overnight for the thread lock to cure. Welcome to your new rifle (or so it’ll feel like)
1/2-13×2-1/2 Socket Allen Head Cap Screws 1/2 x 13 x 2.5 Bolts 1/2×13 x 2-1/2
Welcome To RiverCity Fastener & Supply!And Remember.Don’t get screwed by our competition!Sold by Rivercity Fastener & SupplyWith a simple internet search of our Ebay user name and you can easily find us.RivercityFastenerSupplyBuyers must first add items to their eBay Shopping Cart to purchase multiple items with a single payment.You will get the following:Socket / Allen Head Cap Screw / BoltSize: 1/2-13×2-1/2Screw Specs:(D) Screw Diameter: 1/2Thread Pitch: 13Screw Length: 2-1/2″Thread Length: 1-15/16″Hex Key / Allen Wrench Size: 3/8(K) Head Thickness / Height: .492 ~ .500(H) Head Diameter: .735 ~ .750Grade: 8Material: SteelFinish: Black OxidePlease feel free to ask any questions BEFORE buying but AFTER reading the entire listing, including the description.But first…. A word about DETAILED SELLER RATINGS… eBay’s new seller rating system determines their reputation and the fees that a seller pays and by extension, the price sellers set. Seller’s must keep up a 4.9 average to be in good standing so… If you give a 4 out of 5, thinking you are giving a pretty good feedback…it might as well be a 1 as far as eBay is concerned!!! If you are happy with your purchase please give all 5’s. If you are unhappy with any part of the transaction, please let us know so that we can address it. Remember… 4=BAD, 5=GOOD !!!Other sizes are available just ask.Nuts, Bolts and Screws are measured by the Thread size NOT the Wrench Size. If you have a question about a part or need assistance with an order click on the “Contact Seller” link in the upper right hand corner of each listing. Or give us a call M-F 8am-4:30pm Central standard time. Since eBay no longer allows us to display our phone numbers in the listing please find our phone number on the internet by searching “Rivercity Fastener & Supply in Minnesota and it will bring our number right up.If any problems occur after your purchase is made, contact us before contacting eBay customer service. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be. We want your buying experience on eBay to be as smooth and pleasant as possible. Copyright © 2023-2024 Rivercity Fastener & Supply. All Rights Reserved. We are a real functioning business.eBay questions and opened item cases will be answered and dealt with during business hours by our eBay site manager. Our Business hours are Monday-Friday, 8:00 A.M. to 5:00 P.M. central standard time. Paid orders will ship Monday-Friday 8:00 A.M. to 4:00 P.M. usually within one business day excluding holidays. Copyright © 2023-2024 Rivercity Fastener & Supply. All Rights Reserved.Sold by Rivercity Fastener & SupplyRivercityFastenerSupply FREE SHIPPING ON THIS ITEM!!All items individually labeled in plastic 4 mil zip lock bagsThese are high quality fasteners that were NOT previously rejected for quality issues or rescued from a scrap yard.We only sell new unused fasteners. Looking for another size or quantity? Please e-mail or call us and we will create a listing with what you need.HAVE ANY QUESTIONS OR COMMENTS?WE ARE ALWAYS LOOKING FOR MORE AND YOUR IDEAS OF WHAT TO LIST ON EBAY.WE CARRY A FULL LINE OF METRIC AND STANDARD THREAD FASTENERS.For more tools and fasteners please view my other items.PAYMENT:An Unpaid Item Case Will Be Opened If Payment Is Not Received Within Seven day of Purchase Date.PAYPALVISAMASTERCARDDISCOVER CARDAMERICAN EXPRESSWE DO NOT ACCEPT PERSONAL CHECKS OR BUSINESS CHECKS.PAYMENT IS DUE WITHIN 1 DAYS OF THE END OF AUCTION. FEEDBACK:We maintain high standards of excellence and strive for 100% customer satisfaction! + Positive feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can address / correct your concerns.Five Star Service is Our Goal! We strive to earn 100% perfect “FIVE STAR” scores from you. The star scores are very important to us because eBay uses them to determine our visibility in search results. So, before you post permanent feedback…if anything about the transaction does not meet your expectations… please let us know and give us the chance to make things RIGHT.PLEASE VIEW OUR FEEDBACK! WE WANT ALL OF OUR CUSTOMERS TO BE HAPPY!WE LEAVE POSITIVE FEEDBACK FOR ALL OF OUR CUSTOMERS AS SOON AS WE RECEIVE YOUR PAYMENT WE WILL AUTOMATICALLY LEAVE FEEDBACK FOR YOU.IF YOU ARE NOT HAPPY WITH YOUR PURCHASE TELL US.IF YOU ARE HAPPY WITH YOUR PURCHASE PLEASE TELL OTHERS!If you do not see the size or quantity that you desire, please email me at the ASK A QUESTION for a quote on the size or quantity you would like to purchase. We will customize the order to the quantity, LARGE OR SMALL, that you desire.Copyright © 2023-2024 Rivercity Fastener & Supply. All Rights Reserved. All rights reserved copyright 2023-2024 photos, listing, headings and descriptions.All text in this listing belong to Rivercity Fastener & Supply and can not be copied or used at anytime in anyway.Copyright © 2022-2023 Rivercity Fastener & Supply. All Rights Reserved.
3/4X6″ HEX SOCKET HEAD SHOULDER BOLT ALLOY STEEL PLAIN 5/8-11 THREAD (1)
3/4X6″ SOCKET HEAD SHOULDER BOLT ALLOY STEEL PLAIN 5/8-11 THREAD. Larger quantities are available, Please inquire. All items are packaged in heavy duty ziptop bags and well labeled, perfect size for bin restocking! We carry 1000’s of other fasteners in stock for immediate shipment. We have over 50 years of experience serving Metro Detroit. Send us your requirements. For prompt Quotations, E-mail; sales at americanintegratedsupply dot com or visit us at; www dot americanintegratedsupply dot com