#8 Hex Washer Head Self Drilling Sheet Metal Tek Screws 410 Stainless Steel
#8 Hex Washer Head Self Drilling Sheet Metal Screws 410 Stainless Steel Choose your Length and QuantityFastenere Self-Drilling Screws, also known as Tek screws, eliminate the need for a pre-drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. These sheet metal screws are highly versatile and are used to attached metal, wood, fiberglass and plastic. The sharp threads draw material together and ensure a secure hold.General Product InformationHead Style : Hex WasherDrive Style : External HexDrive Size : 1/4″Screw Size : #8Length : Select Desired Length in Drop Down MenuQuantity of Fasteners in Package : Select Desired Item Package Quantity in Drop Down MenuDetailed Product Information:Head Width Flat to Flat : 1/4″Flange Diameter : 0.348″Head Height : 0.141″Thread Diameter : 0.164″Thread Coverage : Full ThreadPoint Style : Self DrillingDrill Point size : #3 (1/4″)Max Drilling Thickness : 0.150″Key Notes:Hex washer head self drilling screws have a drill point at the tip of the thread drills its own pilot hole in to metal allowing for quick installation and fastening while saving time and effort with just a single stepMade from an ultra strong stainless steel grade 410 giving them the ability to drill through sheet metal and stainless steel while still being wear resistant and offering a mild chemical corrosion protection; these screws are not intended for use with aluminum as the higher iron content in the fastener will cause embrittlement; 410 Stainless steel is always MAGNETIC due to the higher iron content giving the drilling capabilitiesThese screws have a hex head that can be driven with a nut driver or socket and can be adjusted with a wrench; the built in flanged washer adds a secure grip to the material being fastened into while also preventing the head from crushing thin metalThe self drilling point also referred to as a tek can self drill metal up to a thickness of 0.150 inches and is best used with a lot of pressure and a slow drill speed; if drilling too fast you could run the risk of over heating the metal drilling tip which could cause it to wear out or warpFastenere brand self drilling tapping screws will tap their own thread into the material being screwed into creating a long lasting vibration resistant connection that is the choice for use with corrugated roof siding and sheet metal applications
#10 Stainless Steel Self-Drilling Sheet Metal / TEK Screws, Hex Washer Head 410
Monster Overview: Fix your project right the first time with our premium Brighton-Best #10 Indent Hex Washer Head (HWH) UnSlotted Self-Drilling Sheet Metal Screws with EPDM Washers. These screws are made from Hardened 410 Stainless Steel (always magnetic) and are perfect for roofing and exterior applications where corrosion resistance and long-lasting performance are crucial. Monster Bolts ensures every screw meets the highest quality standards, with fast shipping from the US and exceptional customer support, making us the preferred choice for professionals and DIY enthusiasts alike. Note: 410 Stainless Steel is always magnetic Monster Features: Material: 410 Hardened Stainless Steel with EPDM bonded sealing washer for a weatherproof, corrosion-resistant seal. Drive: External Hex 5/16″ for ease of installation. Application: Designed for metal roofing, sheet metal, and other exterior construction applications. Quality: Manufactured by Brighton-Best, known for its high standards in fasteners. Monster Specifications: Diameter: #10 / 0.190″ Thread Pitch: 16 TPI, Type BSD Length: Please select from the drop-down menu above. Manufacturer: Brighton-Best Drive: External Hex 5/16″ Material: 410 Hardened Stainless Steel Type: Sheet Metal Roofing Screw, Self-Drilling with Bonded Sealing washer System of Measurement: Inch / US Specifications: ASME B18.6.3, IFI-113 Head Diameter: Max 0.414″, Min 0.384″ Head Height: Max 0.151″, Min 0.124″ Width Across Flats: 5/16″ (Hex Drive size) Washer Diameter: EPDM Washer, 15/32″ (0.4688″) More Monster Products: Need other sizes or lengths? Check out our full range of self-drilling TEK screws here. Order Yours Today! Get your Brighton-Best #10 Indent Hex Washer Head Self-Drilling Screws today for all your metal roofing and exterior fastening needs. Fast shipping and excellent customer support from Monster Bolts. * Self-drilling through metal up to 0.150″ or up to 12 gauge sheet metal. For best results, use high pressure, low speed to avoid wearing out the self-drilling tip.
#10 Stainless Steel Self-Drilling Sheet Metal / TEK Screws, Hex Washer Head 410
Monster Overview: Fix your project right the first time with our premium Brighton-Best Proferred® #10 Indent Hex Washer Head Self-Drilling Screws from Monster Bolts. These hardened 410 stainless steel screws are designed for superior strength, making them ideal for self-drilling into metal and sheet metal applications. Featuring a #3 BSD point (except for the 1/2″ length which has a #2 point), they provide precision and reliability, eliminating the need for pre-drilling in most cases. Perfect for metal up to 0.150″ thick or 12 gauge sheet metal. Monster Bolts ensures every screw meets the highest quality standards, with fast shipping from the US and exceptional customer support, making us the preferred choice for professionals and DIY enthusiasts alike. Note: 410 Stainless Steel is always magnetic Monster Features: Material: 410 hardened stainless steel, magnetic, with exceptional strength and durability. Point: Self-drilling #3 BSD point (except for 1/2″ length with #2 point). Washer: Indent hex washer head for secure fastening and optimal torque distribution. Application: Perfect for drilling through metal up to 0.150″ or 12-gauge sheet metal. Quality: Monster Bolts only offers premium products backed by excellent customer support. Monster Specifications: Diameter: #10 / 0.190″ Thread Pitch: 16 TPI, Type BSD Drive: External Hex, 5/16″ Material: 410 Hardened Stainless Steel System of Measurement: Inch / US Specifications: ASME B18.6.3, IFI-113 Head Diameter (Max, Min): Max 0.414″, Min 0.384″ Head Height (Max, Min): Max 0.151″, Min 0.124″ Washer Thickness (Max, Min): Max 0.031″, Min 0.019″ Width Across Flats: 5/16″ (Hex Drive size) Monster Installation Tip: * For optimal results, use high pressure and low speed when drilling to avoid wearing out the self-drilling tip. More Monster Products: Need other sizes or lengths? Check out our full range of self-drilling TEK screws here. Order Yours Today! Get your Brighton-Best Proferred® #10 Hardened Stainless Steel Self-Drilling Screws now. Monster Bolts offers fast shipping and superior customer service, making us your trusted source for high-quality fasteners.
1/4-20 Round Head Machine Screws Slotted Drive Stainless Steel All Lengths
1/4-20 Slotted Round Machine Screws Stainless Steel Round Heads have a tall domed top and a flat bearing surface. Machine screws are often used with nuts but also often driven into tapped holes (without nuts). They might be considered a screw or a bolt based on the Machinery’s Handbook distinction. In practice, they tend to be mostly available in smaller sizes and the smaller sizes are referred to as screws or less ambiguously as machine screws, although some kinds of machine screw can be referred to as stove bolts. Holds object to another object that has a pre-threaded hole, frequently a nut. Usually manufactured from metal. Can be rotated into or out of the object using a screwdriver or wrench. General Product Information Head Style : Round Drive Style : Slotted Thread : 1/4-20 Material : Stainless Steel Length : Choose Desired Thread Length From Drop Down Menu Quantity of Fasteners in Package : Choose Desired Item Package Quantity From Drop Down Menu Detailed Product Information: Head Diameter : 0.472″ Head Height : 0.175″ Thread Diameter : 0.250″ Threads Per Inch (TPI) : 20 Coarse or Fine Thread : Coarse Thread Coverage : Fully Threaded Key Notes: Machine screws are uniformly threaded screws of 1/4″ nominal diameter or less that is designed to be threaded into uniformly threaded nuts or threaded holes in the parts they are intended to fasten. Machine screws primary tightening is accomplished by turning the head of the screw. With a bolt, the primary tightening procedure might be accomplished by turning the nut. Round heads feature a round top very similar to half of a sphere with a flat load bearing surface on the underside that will hold materials being fastened firmly together. The slot screw drive has a single slot in the fastener head and is driven by a flat-bladed screwdriver or common blade object. This drive is the best choice for the future maintenance of a project that could be potentially covered with paint or other coatings giving an easy option to clear the slot to unfasten The vast majority of stainless steel fasteners are produced with metals from the austenitic family. Their high levels of chromium and nickel provide tough corrosion resistance and the ability to withstand considerable physical strain without fracturing, albeit at a higher cost than the martensitic varieties. Made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will outperform and outlast all zinc plated fasteners for years without the need to perform costly and time consuming maintenance. Shipping: All orders placed before 3:30 pm EST Will Ship Same Day Tracking is provided on ALL Orders Priority Mail Shipping service is offered at a discount of only $3.95 UPS Ground UPS Next Day Air is available, Please inquire for pricing Returns : ALL returns are accepted if returned within 60 days. Money Back or exchange guaranteed. NO Restocking Fees. For YOU, we constantly strive to find ways to improve our performance.
M6-M10 Socket Button Head Screws Dome Allen Bolts Machine Screw Stainless Steel
Material: 304 Stainless Steel. Length(excluding head thickness): 8-60mm. ● Good quality. About item. Size: M6-M10.
132pcs Stainless Steel Bolt & Nut Kit, M5, M6, M8 Metric Hex Screws 14 Sizes
Complete 132-Piece Hardware Kit: Contains 50 M5 bolts/nuts, 50 M6 bolts/nuts, and 32 M8 bolts/nuts. Pre-counted components ensure consistent inventory for projects. Durable 304 Stainless Steel Hardware: Engineered with highly corrosion-resistant 304 stainless steel (18-8 grade), these hex bolts, nuts, and washers are built to withstand corrosion from saltwater, chemicals, and humidity.