#12 x 1″ HWH STRONG-SHIELD COATED S/D SCREWS 4,000ct | H1216C
#12-14 x 1″ Unslotted Indented Hex Washer Head Tek screws, STRONG-SHIELD Coated. Exceeds 1,000/hr. salt spray resistance. Ideal for all applications where corrosion is a concern. These Strong-Shield coated fasteners have a four-layer protective barrier that prevents fastener corrosion.
#12 x 1-1/4″ HWH STRONG-SHIELD COATED S/D SCREWS 3,000ct | H1220C
#12-14 x 1-1/4″ Unslotted Indented Hex Washer Head Tek screws, STRONG-SHIELD Coated. Exceeds 1,000/hr. salt spray resistance. Ideal for all applications where corrosion is a concern. These Strong-Shield coated fasteners have a four-layer protective barrier that prevents fastener corrosion.
#14 x 1-1/2″ HWH STRONG-SHIELD COATED S/D SCREWS 2,000ct | H1424C
#14-14 x 1-1/2″ Unslotted Indented Hex Washer Head Tek screws, STRONG-SHIELD Coated. Exceeds 1,000/hr. salt spray resistance. Ideal for all applications where corrosion is a concern. These Strong-Shield coated fasteners have a four-layer protective barrier that prevents fastener corrosion.
#10 x 2″ HWH STRONG-SHIELD S/D SCREWS w/ BONDED WASHER 1,500ct | HA1032C
#10-16 x 2″ Unslotted Indented Hex Washer Head Tek screws w/Bonded Washer, STRONG-SHIELD Coated. Bonded Washer: 1/2″ O.D. Bonded washer creates leak proof seal. Ideal for all applications where corrosion is a concern.
#12 x 1-1/4″ HWH STRONG SHIELD S/D SCREWS w/BONDED WASHER 3,000ct | HA5C
Strong Shield Coating exceeds 1,000/hr. salt spray resistance. #12-24 x 1-1/4″ Unslotted Indented Hex Washer Head Tek 5 screws w/Bonded Washer, STRONG-SHIELD Coated. Bonded Washer: 9/16″ O.D. Bonded washer creates leak proof seal.
(3000) 410 Stainless Screw 8-18 x 1-1/4 TEK 2 Phillips Modified Truss #138129
(3000) 8-18×1-1/4 Phillips Modified Truss 410 Stainless Self Drilling Screw #138129 #410 Stainless steel phillips modified truss sound washer head, self Drilling, passivated & waxed screw. Self-drilling screw drills a hole and taps a thread in a single operation. The drilling point must fully penetrate all pieces of material being fastened before the first thread engages. Application: Attaches metal to metal. Drill Capacity (in.): .035 – .100 Installation: A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #2 reduced Phillips drive bit. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. Specifications: • Manufactured to SAE1 J78 for dimensional specifications • Meets F.I.P.2-1000.7 for torsional strength and drill speed • Medium degree of corrosion resistance