8-32 Phillips Truss Head Machine Screws Stainless Steel Wide All Lengths and Qty
8-32 Truss Head Machine Screws Phillips Drive Stainless Steel A Truss head screw has a head with flat underside and a slightly domed top. It has almost no exposed edge. Machine Screws have with “machine” threads for use with a nut or in a tapped hole. Also referred to as a stove bolt. General Product Information Head Style : Truss Head Drive Style : Phillips Drive Size : #2 Thread : 8-32 Length : Select Length in Drop Down Quantity of Fasteners in Package : Select Desired Package Quantity from Drop Down Menu Detailed Product Information: (View Full 2D Dimensional Drawing File By Selecting Desired Length in Drop Down Menu) Head Diameter : 0.384″ Head Height : 0.102″ Thread Diameter : 0.164″ Threads Per Inch (TPI) : 32 Coarse or Fine Thread : UNC Coarse Thread Coverage : Fully Threaded Material : Stainless Steel 18-8 Key Notes: Machine screws are uniformly threaded screws of 1/4″ nominal diameter or less that is designed to be threaded into uniformly threaded nuts or threaded holes in the parts they are intended to fasten. Machine screws primary tightening is accomplished by turning the head of the screw. With a bolt, the primary tightening procedure might be accomplished by turning the nut. Truss heads have very wide and low profile that gives a clean appearance as well as offering a much larger than most surface area that is required for applications where there is a risk of a screw head pulling through a pilot hole. Phillips drive is a cross head design and is the most commonly used type in America. Phillips is often criticized for its tendency to cam out at lower torque levels but this was actually a deliberate feature of the design, for the purpose of assembling aluminum aircraft without overtightening the fasteners. The vast majority of stainless steel fasteners are produced with metals from the austenitic family. Their high levels of chromium and nickel provide tough corrosion resistance and the ability to withstand considerable physical strain without fracturing, albeit at a higher cost than the martensitic varieties. Made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will outperform and out last all zinc plated fasteners for years without the need to perform costly and time consuming maintenance. Shipping: All orders placed before 3:30 pm EST Will Ship Same Day Tracking is provided on ALL Orders Priority Mail Shipping service is offered at a discount of only $3.95 UPS Ground UPS Next Day Air is available, Please inquire for pricing Returns : ALL returns are accepted if returned within 60 days. Money Back or exchange guaranteed. NO Restocking Fees. For YOU, we constantly strive to find ways of improving our performance.
Modified Truss Head #8 x 1/2″ to 3″ Phillips Self Drilling Screws, Zinc
And will NOT match what you have . Picture shown above is example and each length have different amount of threads are on the shaft thread are decreases as length increases. These are industry standard screws.
Black Carbon Steel Phillips Modified Truss Head Sheet Metal Self Tapping Screws
Black Carbon Steel Phillips Modified Truss Head Sheet Metal Self Tapping ScrewsScrew Size: M1.2 M1.4 M1.7 M2 M2.3 M2.6 M3 M3.5 M4 Screw Length:3mm-30mmMaterial: Steel Payment 1. We accept Paypal, and credit card via paypal.com only. Shipping 1. We ship your orders within 7 business days after the payment cleared. 2. Because The Price Is Relatively Low, It Takes 15-35 Working Days For Use Economic Transportation Below $15, And 10-15 Working Days For Use Standard Transportation Above $15. Contact us 1. Please contact us with eBay messages if you have any questions. 2. You will get a response in 24 hours. Thank you very much!!! 3. Thank you for your cooperation, I plant all staff and customer service team will provide you with quality service. Maintain an active dialogue with the sincere hope that our customer service team. Thank you again for your cooperation!!! Feedback When you receive the item and love it, please leave us positive feedback. Your feedback is very important to us. If you have any question, please contact me before leave negative feedback. We will do our best to solve the problems. Anything can be resolved through communication, Thank you!
Modified Truss Head Phillips Self piercing sharp point screws #8 x 1/2″- 3″ Zinc
PLEASE READ ALLPhillips Modified Truss Head #8 x 1/2″, 3/4″, 1″, 1-1/4″,1-5/8″,2″, 2-1/2″ and 3″ K-Lath Self piercing / Tapping Screws zinc plated (see Item # 254460087229 for black oxide coated) , [ we do not carry these in #6 or #10] ***** Some bulk quantity will only ship to mailand USA ONLY if outside then contact first befor placing the order*****SOME PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product / Item dimensions, finish, head markings, coating, thread length, stamping shape or forging shape, drive head depth, etc., may differ from picture. Products are guaranteed to meet the specs to which they are manufactured (Industry standards). Specs allow for tolerances in dimension and shape, which can vary from lot to lot (varies from one manufacturer to another). *****And will NOT match what you have*****.(this not make it defective) If you have any questions, or if your requirements include specific dimensions, please contact us before buying. Specifications for this item Brand Name CYW, Interfast, Strong-point and other brands System of Measurement Inch Drive Style Phillips Exterior Finish Zinc-Plated Head Style Truss Head Number of Screws Select above Point Style Self-piercing / Tapping Multipurpose sheet metal screw for light to medium gauge applications Also used to attach lath to wood or light gauge metal. Just to let you know that if you have a resale number you can give it eBays that way you will not pay any sales tax on any of your purchases. *** Shipping Times are ESTIMATED and NOT guaranteed ***This is from bulk pack the packages above are not individually packed packs actual color may vary from pictures.Please allow + or – 5% Approximately count difference depending on the size due to the fact its counted by machine or by weight. Product / Item dimensions, finish, head markings, coating, thread length, stamping shape or forging shape, drive head depth, etc., may differ from picture. Products are guaranteed to meet the specs to which they are manufactured (Industry standards). Specs allow for tolerances in dimension and shape, which can vary from lot to lot (varies from one manufacturer to another). *****And will NOT match what you have***** (this does not make it defective) If you have any questions or if your requirements include specific dimensions, please contact us before buying.Picture shown above is example and each length have different amount of threads are on the shaft thread are decreases as length increases. These are industry standard screws. Contact us if you have any questions.SOME PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.If you have any questions, please ask before purchase.We reserve the right to alternate between FedEx, UPS or USPS depending on which is cheaper and/or faster.Please take a moment and check our other listings too.Offers will be considered on quantity purchasesNote: The digital images we display have the most accurate color possible. However, due to differences in computer monitors, there may be variations in color between the actual product and your screen.FeedbackTo leave feedback for your purchase on eBay, please follow these steps:1. Go to My eBay>Account>Feedback.2. Choose the item you purchased from your list of items awaiting feedback.3. Submit your feedback. We thank you in advance for taking the time to submit your feedback.Please take a moment and view our new listing daily, hope to see you make more purchases soon.Best wishes & thank you for your business. ReturnsFailures to follow manufacturer’s instructions to assemble, install, operate, or download proper software etc. are no grounds for return as defect.***** In case of any of the bellow listed matters Please contact us first and do not open a case or return and we will take care the matter immediately********** If package received is damaged the DO NOT open the package NOTIFY us immediately provide us with the pictures (if you open the package then you the buyer will have to pay for the return shipping cost otherwise it can be sent back as return to sender or wait for the insurance carriers instruction to send it to them but do not send it back before you get the authorization from us otherwise the shipping cost + partial fees WILL be deducted from refund amount you give consent to agree with this term if you do not agree then do NOT make the purchase with us we get about 0-3 of these a year and most of our packages are insured ********** If you receive a wrong item DO NOT open the inner packing and do NOT discard any packing, Please NOTIFY us immediately and provide us with the pictures ASAP so we can handle the matter immediately*********ALL RETURNS MUST BE IN ORIGINAL SHIPPING PACKING ALTERNATE PACKING WILL INCREASE SHIPPING COST WHICH WILL BE PAID BY BUYER ***** (Example: if you receive item in a flat rate shipping it must be returned in exactly same envelope if you change to plain or larger envelope or box it will cost a lot more in shipping which will be paid by buyer and post office will charge extra which we will not pay and package will be returned to sender and you the buyer will lose the label and will have to pay again in order to send the item back and this will cause a lot of delays). Damaged, Wrong or defective item/s received must be reported within 7 days of purchase or 3 days of delivery. Buyer must return the item in its original packing and original shipping supplies (shipping bags or boxes the item was shipped in, disposing them the will not be eligible for retain or refund. return will be accepted only when a proof is provided by the buyer as requested by the seller such as pictures etc. and dispose the item if and as instructed by the seller and provide the proof of doing so as requested by the seller.Buyer must keep all the packing and damages item for insurance claim as the item will be shipped back to insurance company and not us.Any item returned without original packing or partial shipping packing, refused delivery (marked return to sender) delivered to incorrect address provided by the buyer, abused, mishandled by the buyer or claimed as defective but in fact the item is in working condition will incur handling fee 30% and $1.00 minimum for items $4.00 and under PLUS shipping cost both ways outbound and inbound, these fees will be deducted from the total purchase price, Abused, used, mishandled, missing original packing, unsealed factory sealed item are NON REFUNDABLE. All returns must be in the same condition you received it and in the original packaging and return postage is the responsibility of the buyer. Any item returned to us for any reason other than the sellers fault will be subject 30% handling fee minimum of $3.00 plus all the shipping charges both way outbound and inbound in case of any refund is given.WarrantyWe do NOT provide any warranty what so ever, you can purchase the warranty thru eBay Square trade at the time of purchase. International buyerBuyer is responsible for paying any import tax, duties and customs charged by your destination and releasing the item from the customs, post office etc.Item/s no picked up by the buyer from the customs will be considered delivered and not eligible for returns or refund.Buyer is responsible for returned item undelivered to given address, failed delivery attempts, unpaid customs, and unclaimed item from your local delivery agency etc. or returned for any reason other than seller fault.Seller will not ship to any destination where delivery confirmation is not available but the buyer has the option and can insist on shipping by assuming and accepting the entire risk o in the event that the package it damaged or lost or returned undelivered. NO REFUND or any compensation will be given or reimbursed by the seller to the buyerAny lost or damaged item is responsibility of the buyer they can purchase the insurance before paying for the shipping.Any item returned to us for any reason other than the sellers fault will be subject 30% Handling fee minimum of $3.00 plus all the shipping charges both way outbound and inbound in case of any refund is given.Shipping charges are NON_REFUNDABLE under any circumstances (shipping cost is NOT covered by insurance, only the item face value is) Fasteners etc.Amount of threads on the shaft change accordingly with lengthPlease check first if the fastener you are about to purchase is suitable or compatible to what you are using it for.Not using proper bit or failure to drill a proper thickness and depth pilot holes WILL BREAK the screw or make it strip that does not mean the screws are defective and will not be eligible for returns as a defective. All the coating application is applied by the manufactures and NOT us.Please note that the seller does NOT provide any guaranty or warranty on the performance of the fasteners / nails / staples / brads etc. improper use or application of these items may cause serious injury or damage to the item itself.Fasteners #6 and below are designed for very light application and specific use as described by the manufacturer and misuse, over tightening, wrong application or use of impact drivers over torque etc. will cause the heads to break and cannot be returned or exchanged. This also applies to all the other #’s when over torqued or wrong applications.Some of these fasteners are intended for very light applications, please contact or visit the manufacturer’s web site for more information.***Improper use / application / or use of impact drivers on certain size and type of fasteners may cause the heads to break off you might need to drill pilot holes the screws might even break despite pilot holes depending on the screw, type of wood and/ or the toque used to drive the screw etc. Bits longer than 2” and torque bits will cause problems such as heads breaking off, slipping, stripping, cavatate etc.( Bits longer than 2“ have greater chance to break the screws)We recommend that if you are concerned with the coating or the strength of the screw is to purchase small quantity and try it first before making a large order to see if the fastener you are about to purchase is suitable for your application. Thank you!
Modified Truss Head #8 x 1/2″ to 3″ Self Drilling Screws, Black
PLEASE READ ALLPhillips Mod Truss Head #8-18 x 1/2″, 9/16″, 3/4″, 1″, 1-1/4″, 1-18/5″, 1-7/8″, 2″, 2-1/2″, or 3″ Self-Drilling Tek Screws Black Oxide SOME PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product / Item dimensions, finish, head markings, coating, thread length, stamping shape or forging shape, drive head depth, etc., may differ from picture. Products are guaranteed to meet the specs to which they are manufactured (Industry standards). Specs allow for tolerances in dimension and shape, which can vary from lot to lot (varies from one manufacturer to another). *****And will NOT match what you have*****.(this not make it defective) If you have any questions, or if your requirements include specific dimensions, please contact us before buying.*****Bulk items ships to mailand USA ONLY please contact us first for other locations***** System of Measurement 1/2″ – 3″ Inch select above Drive Style Phillips Exterior Finish Black Oxide Head Style Truss Head Number of Screws Select above Point Style Self-Drilling Meets ASTM C 1513 for cold-formed steel framing Meets F.I.P.-1000 7 for torsional strength & drill speed Meets SAE J78 for performance & dimensional Specifications ICC-ES Evaluation Report: ESR-3528 Meets ASTM A 510 for carbon Steel manufacturing Just to let you know that if you have a resale number you can give it eBays that way you will not pay any sales tax on any of your purchases.This is from bulk pack the packages above are not individually packed packs actual color may vary from pictures.Please allow + or – 5% Approximately count difference depending on the size due to the fact its counted by machine or by weight. Product / Item dimensions, finish, head markings, coating, thread length, stamping shape or forging shape, drive head depth, etc., may differ from picture. Products are guaranteed to meet the specs to which they are manufactured (Industry standards). Specs allow for tolerances in dimension and shape, which can vary from lot to lot (varies from one manufacturer to another). *****And will NOT match what you have***** (this does not make it defective) If you have any questions or if your requirements include specific dimensions, please contact us before buying. Picture shown above is example and each length have different amount of threads are on the shaft thread are decreases as length increases. These are industry standard screws. Contact us if you have any questions. If you have any questions, please ask before purchase. We reserve the right to alternate between FedEx, UPS or USPS depending on which is cheaper and/or faster. Please take a moment and check our other listings too. Offers will be considered on quantity purchases Note: The digital images we display have the most accurate color possible. However, due to differences in computer monitors, there may be variations in color between the actual product and your screen. Feedback To leave feedback for your purchase on eBay, please follow these steps: 1. Go to My eBay>Account>Feedback. 2. Choose the item you purchased from your list of items awaiting feedback. 3. Submit your feedback. We thank you in advance for taking the time to submit your feedback. Please take a moment and view our new listing daily, hope to see you make more purchases soon. Best wishes & thank you for your business. . . . . . . *** Shipping Times are ESTIMATED and NOT guaranteed *** Returns Failures to follow manufacturer’s instructions to assemble, install, operate, or download proper software etc. are no grounds for return as defect. ***** In case of any of the bellow listed matters Please contact us first and do not open a case or return and we will take care the matter immediately***** ***** If package received is damaged the DO NOT open the package NOTIFY us immediately provide us with the pictures (if you open the package then you the buyer will have to pay for the return shipping cost otherwise it can be sent back as return to sender or wait for the insurance carriers instruction to send it to them but do not send it back before you get the authorization from us otherwise the shipping cost + partial fees WILL be deducted from refund amount you give consent to agree with this term if you do not agree then do NOT make the purchase with us we get about 0-3 of these a year and most of our packages are insured ***** ***** If you receive a wrong item DO NOT open the inner packing and do NOT discard any packing, Please NOTIFY us immediately and provide us with the pictures ASAP so we can handle the matter immediately***** ****ALL RETURNS MUST BE IN ORIGINAL SHIPPING PACKING ALTERNATE PACKING WILL INCREASE SHIPPING COST WHICH WILL BE PAID BY BUYER ***** (Example: if you receive item in a flat rate shipping it must be returned in exactly same envelope if you change to plain or larger envelope or box it will cost a lot more in shipping which will be paid by buyer and post office will charge extra which we will not pay and package will be returned to sender and you the buyer will lose the label and will have to pay again in order to send the item back and this will cause a lot of delays). Damaged, Wrong or defective item/s received must be reported within 7 days of purchase or 3 days of delivery. Buyer must return the item in its original packing and original shipping supplies (shipping bags or boxes the item was shipped in, disposing them the will not be eligible for retain or refund. return will be accepted only when a proof is provided by the buyer as requested by the seller such as pictures etc. and dispose the item if and as instructed by the seller and provide the proof of doing so as requested by the seller. Buyer must keep all the packing and damages item for insurance claim as the item will be shipped back to insurance company and not us. Any item returned without original packing or partial shipping packing, refused delivery (marked return to sender) delivered to incorrect address provided by the buyer, abused, mishandled by the buyer or claimed as defective but in fact the item is in working condition will incur handling fee 30% and $1.00 minimum for items $4.00 and under PLUS shipping cost both ways outbound and inbound, these fees will be deducted from the total purchase price, Abused, used, mishandled, missing original packing, unsealed factory sealed item are NON REFUNDABLE. All returns must be in the same condition you received it and in the original packaging and return postage is the responsibility of the buyer. Any item returned to us for any reason other than the sellers fault will be subject 30% handling fee minimum of $3.00 plus all the shipping charges both way outbound and inbound in case of any refund is given. Warranty We do NOT provide any warranty what so ever, you can purchase the warranty thru eBay Square trade at the time of purchase. International buyer Buyer is responsible for paying any import tax, duties and customs charged by your destination and releasing the item from the customs, post office etc. Item/s no picked up by the buyer from the customs will be considered delivered and not eligible for returns or refund. Buyer is responsible for returned item undelivered to given address, failed delivery attempts, unpaid customs, and unclaimed item from your local delivery agency etc. or returned for any reason other than seller fault. Seller will not ship to any destination where delivery confirmation is not available but the buyer has the option and can insist on shipping by assuming and accepting the entire risk o in the event that the package it damaged or lost or returned undelivered. NO REFUND or any compensation will be given or reimbursed by the seller to the buyer Any lost or damaged item is responsibility of the buyer they can purchase the insurance before paying for the shipping. Any item returned to us for any reason other than the sellers fault will be subject 30% Handling fee minimum of $3.00 plus all the shipping charges both way outbound and inbound in case of any refund is given. Shipping charges are NON_REFUNDABLE under any circumstances (shipping cost is NOT covered by insurance, only the item face value is) Thank you!