Kingsley Evans Logo

Item Tag: Various

6 Gauge AWG Copper Battery Cable Marine, Car, Truck, RV, Solar Custom Made

6 Gauge AWG custom made battery cable assembly which includes your choice of lugs crimped to the wire with adhesive lined heat shrink to seal the connections. Your choose your wire color, length, and lugs from the options above near the purchase buttons. The copper lug connector (ring terminal) choices are 1/4, 5/16 or 3/8 with adhesive heat shrink tubing applied as follows:Black cable gets Black Heat ShrinkRed cable gets Red Heat ShrinkThe heat shrink has a melt-able glue lining to help seal your cable from air and moisture. The copper lugs feature a tin plating which is resistant to corrosion you’ll see on bare copper ring terminals.If you need something special with regard to the length or lugs outside the available options please send us a message and we may be able to help you out. ABOUT THE WIRE USED:Introducing our multi-rated, multi-purpose, flexible, real copper battery cable. This wire has multiple approvals for use in many electrical installation making it a very unique cable. From the pure electrolytic copper stranding to the durable yet flexible insulation, this cable has been designed to impress. Our UL listed battery cable carries ratings allowing it to be used as marine battery cable listed as UL1426 Boat Cable which maintains a BC-5W2 temperature rating of 105C dry and 75C wet. This wire can be continuously submerged in water with no issues. This fine battery cable exceeds the requirements of ABYC and the USCG (US Coast Guard) for installation on boats.The copper conductor features stranding which is tin plated to resist corrosion. Flexible Type III, Class K stranding is designed to absorb vibration found in motive environments such as automotive and marine thus protecting the cable from premature failure.FEATURES:Meets all applicable boat wiring regulations from ABYC, UL1426,and US Cost Guard for use on boatsRated 600 Volts Max with 105C Dry and 75C Wet (BC-5W2) temperature ratings and will remain flexible in extreme cold weatherJacket and insulation are resistant to oil, gas, fungus, salt water, battery acid, heat, abrasion and sunlightMultiple ratings including – BOAT CABLE (UL1426), THW (building wire), MTW (machine tool wire), AWM (Appliance Wiring Material) and CSA TEWCarries UL VW-1 Flame Resistant RatingIs ROHS CompliantMADE IN THE USA!!!Battery Cable Specifications:Wire Size Nominal Stranding Weight Amp Rating (AWG) O.D.(Inch) Count LBS/FT Continuous* 8 0.249 168 0 .070 80 6 0.324 266 0.114 120 4 0.386 420 0.164 160 2 0.437 665 0.251 210 1 0.518 836 0.333 245 1/0 0.563 1064 0.403 285 2/0 0.615 1330 0.500 330 3/0 0.670 1672 0.614 385 4/0 0.740 2109 0.765 445*Per ABYC/USCG (Inside of engine space de-rate amps shown by 15% due to extra heat)Final pointers on lug sizing….many standard threaded stud batteries will have either a 5/16 or 3/8 inch stud. Most of the time the negative will be 5/16 so if the positive is the same size it is also 5/16, but if your battery stud is larger on the positive it will most likely be a 3/8. There are exceptions to the rule so please contact the manufacturer or measure. You can search online for bolt sizing tables which will help. Smaller batteries like golf cart and PWC batteries often use a 1/4 bolt. Please double check your needs BEFORE ordering

New Pressure Sensor for Caterpillar 2746719 274-6719 Fits Various Models

New pressure sensor for Caterpillar engines. Part #: 274-6719 Description: Sensor, pressure Quantity: 1 Shipping: $5.00 ATTENTION: We sell OEM, aftermarket and used parts. Please read the description to know what you are buying. The photo will be representative of the part you will receive, we don’t use “stock” photos. We are a legitimate business doing equipment repairs and engine rebuilds. If we are selling an aftermarket version of a part rest assured we have already used that part in the field and are very confident in its quality. This is our full time job, we aren’t working out of our basement. As such we will NEVER lie or misrepresent anything we sell just to make a couple bucks, our reputation is very important. We try to always provide free shipping but transportation costs have increased dramatically so please read the description. We will always state the shipping cost in the description. If you aren’t sure if the part will fit your equipment please send us your model and serial number and we can check. Thanks for looking and have a great day!

Steel Replaces Various manufacturers see interchange below Alto 320715-240

Steel Replaces Various manufacturers see interchange below Alto 320715-240 Steel Replaces Various manufacturers see interchange below Alto 320715-240 Original Alto Clutch Plates! MADE IN USA! High Quality! Steel Clutch. High Quality! Made in the USA! Replaces KOMATSU 5663341230. Replaced by Alto # 320715-240. 146 Teeth. Outside Diameter – Inside Diameter – Thickness in Inches: 19.47 x 13.622 x 0.095Outside Diameter – Inside Diameter – Thickness in Inches: 19.47 x 13.622 x 0.095Outside Diameter – Inside Diameter – Thickness in Millimeters: 494.54 x 346 x 2.41Replaces and Interchanges with the following part numbers:56633412305663342130566-33-41230566-33-42130 About Alto Alto Products Corp. is the oldest and largest independently owned and operated manufacturer of heavy duty friction material in the world. Alto is an ISO certified OE manufacturer of clutches and brakes for almost 70 years. Alto manufactures and distributes a complete range of heavy duty friction material and steel plates for on and off highway applications. All components are manufactured in-house in the USA. Quality is the cornerstone of customer confidence. Alto Products are engineered to meet or exceed customer satisfaction. The process begins with testing of all incoming materials, followed by controlled checks through all phases of processing, finished by a final check of each and every part. Our Statistical Process Control program ensures the integrity of every part. Quality, value, and service is our goal at Alto. Installing an Alto Product in your vehicle is not just the best decision. It’s the only decision. If you are not satisfied with your order, please contact us ASAP to set up a return or exchange. Please give us the opportunity to make it right. We offer a 1 year limited warranty against defects on most of our products. Please message us if you have specific questions regarding warranty info. Every part has been 100% Quality Checked to ensure that you can install our part with confidence. We offer parts at the most competitive prices with quick delivery. Steel Replaces Various manufacturers see interchange below Alto 320715-240 Original Alto Clutch Plates! MADE IN USA! High Quality! Steel Clutch. High Quality! Made in the USA! Replaces KOMATSU 5663341230. Replaced by Alto # 320715-240. 146 Teeth. Outside Diameter – Inside Diameter – Thickness in Inches: 19.47 x 13.622 x 0.095Outside Diameter – Inside Diameter – Thickness in Inches: 19.47 x 13.622 x 0.095Outside Diameter – Inside Diameter – Thickness in Millimeters: 494.54 x 346 x 2.41Replaces and Interchanges with the following part numbers:56633412305663342130566-33-41230566-33-42130 About Alto Alto Products Corp. is the oldest and largest independently owned and operated manufacturer of heavy duty friction material in the world. Alto is an ISO certified OE manufacturer of clutches and brakes for almost 70 years. Alto manufactures and distributes a complete range of heavy duty friction material and steel plates for on and off highway applications. All components are manufactured in-house in the USA. Quality is the cornerstone of customer confidence. Alto Products are engineered to meet or exceed customer satisfaction. The process begins with testing of all incoming materials, followed by controlled checks through all phases of processing, finished by a final check of each and every part. Our Statistical Process Control program ensures the integrity of every part. Quality, value, and service is our goal at Alto. Installing an Alto Product in your vehicle is not just the best decision. It’s the only decision. If you are not satisfied with your order, please contact us ASAP to set up a return or exchange. Please give us the opportunity to make it right. We offer a 1 year limited warranty against defects on most of our products. Please message us if you have specific questions regarding warranty info. Every part has been 100% Quality Checked to ensure that you can install our part with confidence. We offer parts at the most competitive prices with quick delivery. eBay integration by

Fits Caterpillar Dozer Seat Assembly – Fits Various Models – Black Vinyl

Caterpillar Aftermarket Seat Assembly For Dozers *Will Not Fit Any Model Listed If Original Seat Was A Grammer DS44. Will Not Fit If Original Seat Has An Integrated Swivel* *For These Models You Must Also Replace The Original Suspension With The Heavy-Duty Mechanical Suspension (PN: 6111): D3B, D3C LGP, D3C LGP III, D3C XL II, D4C LGP III, D4C XL II, D4H, D4H II, D4H LGP II, D5, D5 LGP, D5C III, D5H XL, D5H XL III, D5M LGP, D5M XL, D6D LGP, D6D PS, D6H II, D6H DS LGP, D6H DS XL II, D6H LGP II, D6H LGP III, D6H LT, D6H XL, D6H XL II, D7G SA, D7C, D7E, D7F, D7G SA, D7G LGP, D7H LGP, D8K, D8L, D9H, D9L, D10* *Please Verify All Measurements And Model Numbers (The WHOLE Model Number). In Some Cases, Particular Machines Have Multiple Options. It Is Up To You To Decide For Sure If This Item Fits Your Machine. If You Need Help, Please Call Or Email Us.* Features: Heavy-duty vinyl covering Cut and sew vinyl to create a more rugged, comfortable cover Vinyl is water-resistant Adjustable backrest folds forward and reclines 3-position lumbar support to help prevent lower back pain Adjustable black Dura-Tex armrests fold up and out of the way allowing for easy access to the seat and offers individual comfort (standard on PNs: 8209, 8384 and 8390 only, optional on PN: 8021) Durable document pouch stores owner’s manual and other valuables Adjustable slide rails from 6.5″ – 13″ side-to-side for universal fit Accepts flange bolt mount operator presence switch Mounting Patterns Include (W x D): (All Dimensions Are In Inches) 6.50 – 13.00 x 11.00 **Please Check The Mounting Pattern On Your Existing Seat Before Ordering.** Available Color Options: Black Vinyl (PN: 8021) Black Vinyl with Armrests (PN: 8390) Gray Vinyl with Armrests (PN: 8384) Yellow Vinyl with Armrests (PN: 8209) Available Options: Seat Belt Bracket Kit Necessary with Part Number: 7911 (PN: 6002) Lap Belt Kit (PN: 7911) Operator Presence Switch – Normally Open (PN: 8665) Available Maintenance Item: Replacement Armrest Kit (PN: 8025) Replacement Adjustable Slide Rail Kit (PN: 8453) Fits Caterpillar® Dozers: D3, D3B LGP, D4D, D4D LGP, D4D SA, D4E, D6D, D7G SA, D8K, D9G, D9H Fits Caterpillar® Dozers (Must Also Replace The Original Suspension With The Heavy-Duty Mechanical Suspension (PN: 6111)): D3B, D3C LGP, D3C LGP III, D3C XL II, D4C LGP III, D4C XL II, D4H, D4H II, D4H LGP II, D5, D5 LGP, D5C III, D5H XL, D5H XL III, D5M LGP, D5M XL, D6D LGP, D6D PS, D6H II, D6H DS LGP, D6H DS XL II, D6H LGP II, D6H LGP III, D6H LT, D6H XL, D6H XL II, D7C, D7E, D7F, D7G LGP, D7G SA, D7H LGP, D8K, D8L, D9H, D9L, D10 Powered by Jazva