2pcs Solvent Alcohol Dispenser 250ml Push Down Nail Polish Remover Bottle White
The push-type alcohol bottle is made of thickened plastic material, which is acid-resistant and corrosion-resistant. The stainless steel bottle cap and aluminum core pump head prevent solvent leakage, volatilization and corrosion, and are easy to clean and maintain.The alcohol dispenser is small, easy to use and carry, and the bottle has clear graduations for you to control the amount of liquid solvent.Push pump dispensers are suitable for dispensing liquids on cotton balls, brushes, and nail wipes. Just place a cotton pad on it and press on the center of the lips, the liquid will rise to the surface, soaking the cotton pad.Plastic push-down dispensers are good for alcohol, acetone, flux, etc. Do not place it upside down, just stand upright to prevent solvent leakage, evaporation and corrosion.
20 x Round Metal Rods 1.7mm x 100mm High Speed Steel (HSS) Lathe Bar Stock
Specifications: Diameter: 1.7mm / 0.07″, diameter accuracy: +/-0.008mm / 0.0003″; length: 100mm / 3.93″. High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pinsVersatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel itemsUse Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formedMeet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything.
Copper Sheet Roll Metal Foil Plate 1000mm x 100mm x 0.15mm New
Specifications: Material: CopperThickness: 0.15mm/0.006″Panel Dimensions: 1000 x 100mm/39.4″ x 3.94″(L x W)Features: Copper sheet demonstrates fully the electrical conductivity and corrosion resistance of the copper metal.Cutting with a professional cutting machine and safe to use. Widely used in DIY projects, hobbies, crafts, building decoration, industrial, conduction heat, and so on.Notice:1. The surface of the copper sheet is easy to be oxidized and it will have a little oxidation (not rustiness), but it does not affect the use. If you need a beautiful appearance, such as crafts, it is recommended to use fine sandpaper grinding2. It is not recommended to print and engrave words on the surface.
5pcs 150x100mm Double Sided Copper Clad Laminate PCB Circuit Board FR4 1mm
Description:* Great for building a prototype of an electronic circuit, double side copper PCB.* Mechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-conductive substrate.* This product is widely used in product development, DIY experiments, maintenance, production, etc.* Note: The product length tolerance is +/-3mm, the width tolerance is +/-2mm.Specifications:* Product Name: PCB Copper Clad Board* Dimension : 180x120mm / 7.1×4.7 inch(L*W)* Material : FR4 Glass Fiber; Copper* Thickness : approx. 1.5mm* Color: Copper TonePackage content:5pcs x Copper PCB BoardNote: The product may be slightly scratched or dirty during transportation, which will not affect its use.
Round Metal Rods 1.8mm x 100mm High Speed Steel Lathe Bar Stock 10 Pcs
Features:Diameter: 1.8mm / 0.07″Length: 100mm / 3.94″Material: HSS (High Speed Steel)Finish: PolishedHRC: 61-63Package Content: 10 Pcs x Round Steel Metal RodsDescriptions:1. Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle. Rods can be cut and formed into replacement parts for almost anything.2. The surface is smooth, easy to shape, no cracks formed. For DIY craft making. Sturdy and durable. Round Rods are nice and easy to cut. You can cut to any size you want according to your needs.
1mm x 100mm Round Metal Rods High Speed Steel Lathe Bar Stock HSS 20Pack
Lathe Bar StockWhy Choose This:★Round Metal Rods: Diameter: 1mm / 0.04″; length: 100mm / 3.93″. High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63★Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed★Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items★General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins★Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything.