Brand New Ideal ABS Signal Thrower Cat. No. 62-184
Specifications
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Return Shipping Will Be Paid By | Buyer |
| Brand | Ideal |
| MPN | Does Not Apply |
like NEW Mellanox ConnectX-2 DualPort 10GbE SFP+ HBA Adapter IBM System XP/N: 81Y9993 FRU P/N: 81Y9992 DescriptionOne like NEW Mellanox ConnectX-2 DualPort 10GbE SFP+ HBA Adapter IBM System XP/N: 81Y9993 P/N FRU: 81Y9992 This is a used unit, look in great shape and in good working order. No other accessories included, unless it's specified above. As seem in picture... Features... The Mellanox ConnectX-2 Dual Port 10GbE Adapter for IBM System x has the following features:Performance:Based on ConnectX-2 EN technology, the PCI Express 2.0 x8 adapter provides a high level of throughput performance for all network environments by removing I/O bottlenecks in mainstream servers that are limiting application performance. Servers supporting PCI Express 2.0 with 5 GTps can fully utilize both 10 Gbps ports and achieve up to 40 Gbps duplex bandwidth. Hardware-based stateless offload engines handle the TCP/UDP/IP segmentation, reassembly, and checksum calculations that would otherwise burden the host processor. These offload technologies are fully compatible with Microsoft RSS and NetDMA.RDMA over Ethernet (RDMAoE) further accelerates application run time. The RDMAoE specification provides efficient data transfer with very low latencies on lossless Ethernet networks. RDMAoE enables lowest latency memory transaction, with less than 2µs at full bandwidth with small message size. This allows very high volume, transaction intensive applications typical of financial market firms and other industries where speed of data delivery is paramount to take advantage. With Mellanox ConnectX-2 Dual Port 10 Gbe Adapter, high frequency transaction applications are able to access trading information with shorter times, making sure the trading servers are able to respond first to any new market data and market inefficiencies, while the higher throughput enables higher volume trading, maximizing liquidity and profitability.In data mining or web crawl applications, RDMAoE provides the needed boost in performance to search faster by solving the network latency bottleneck associated with I/O cards and the corresponding transport technology in the cloud. Various other applications that benefit from RDMAoE with ConnectX-2 EN include Web 2.0 (Content Delivery Network), Business intelligence, data base transactions and various Cloud computing applications.Mellanox ConnectX-2 EN low power consumption, less than 3.5W per port, provides customers high bandwidth and low latency at the lowest cost of ownership.I/O virtualizationConnectX-2 EN with Virtual Intelligent Queuing (Virtual-IQ) technology provides dedicated adapter resources and guaranteed isolation and protection for virtual machines within the server. The adapter gives data center managers better server utilization and LAN and SAN unification while reducing cost, power, and cable complexity.Quality of ServiceResource allocation per application or per virtual machine is provided by the advanced QoS supported by ConnectX-2 EN. Service levels for multiple traffic types can be based on IETF DiffServ or IEEE 802.1p/Q, allowing system administrators to prioritize traffic by application, virtual machine, or protocol. SpecificationsThe adapter has the following specifications:Low-profile adapter form factorPorts: Two 10 Gigabit Ethernet ports with SFP+ connectorsASIC: Mellanox ConnectX-2 ENCabling types: Direct Attached Copper, SR and LR Fiber OpticHost interface: PCI Express 2.0 x8 (5.0 GT/s)Features: Stateless Offload, Priority Flow ControlPower consumption: 6.4 W (typical)Note: The adapter does not support FCoE.Ethernet support and standards: IEEE Std 802.3ae 10 Gigabit EthernetIEEE Std 802.3ad Link Aggregation and FailoverIEEE Std 802.3x PauseIEEE 802.1Q, .1p VLAN tags and priorityIEEE P802.1au D2.0 Congestion NotificationIEEE P802.1az D0.2 Enhanced Transmission SelectionIEEE P802.1bb D1.0 Priority-based Flow ControlMulticastJumbo frame support (10KB)128 MAC/VLAN addresses per portTCP/UDP/IP stateless offload: TCP/UDP/IP checksum offloadTCP Large Send Offload (< 64KB) or Giant Send Offload (64KB-16MB) for segmentationReceive Side Scaling (RSS) up to 32 queuesLine rate packet filteringAdditional CPU offloads: RDMA over Ethernet supportTraffic steering across multiple coresIntelligent interrupt coalescenceCompliant to Microsoft RSS and NetDMAHardware-based I/O virtualization: Address translation and protectionDedicated adapter resources and guaranteed isolationMultiple queues per virtual machineHardware switching between guest OSsEnhanced QoS for vNICsVMware NetQueue support Physical specificationsThe adapter has the following physical specifications (without the bracket):Length: 142 mmHeight: 69 mmDepth: 18 mmMaximum weight: 0.25 kg (0.5 lb) Operating environmentThe adapter is supported in the following environment:Operating temperature: 0 to 55° CAir flow: 200 LFM at 55° C Warranty 30 Days D.O.A!!! Shipping & Handling Buyer pays $5.99 for standard UPS or USPS shipping and packaging with in the 48 United States. Hawaii, Alaska, and outside of US, please ask for the actual shipping cost. Buyer is responsible for all custom fees and/or import taxes. Payment and Terms PayPal !!! We only ship the item when the payment is cleared, and the tracking number will be send to confirmed PayPal's email. Please read the description carefully and be sure this is the item that you want before making the bid. If it's not stated on the listing, meaning that it's NOT included, so please do NOT assumption.... if you have question or any confusion, feel free to ask!!! Payment must be make with in six days after the auction is ended. Fail to complete the payment, I will file a dispute with Ebay to get our listing fee back.
Related Items
