Digital Multimeter AC DC Voltmeter Ammeter Ohmmeter Volt Tester Meter XL830L
DC Current Modes A wide range of functions cover just about every use case. If continuity exists a built in buzzer will sound. Data hold button locks displayed value. NPN & PNP 0-1000 3V 10µA. Transistor hFE Test.
Digital Multimeter AC DC Voltmeter Ammeter Ohmmeter Volt Tester Meter WITH BATs
Product size: 17.5cm x 10.7cm x 7.5cm. You will be pleasantly surprised by our service. – 1 x Pakko 9V Battery. – 1 x Quality Probe Lead. – Low Battery Indication. – Continuity Buzzer.
Digital Multimeter AC DC Voltmeter Ammeter Ohmmeter Volt Tester Meter XL830L USA
Digital Multimeter AC DC Voltmeter Ammeter Ohmmeter Volt Tester Meter XL830L USAProduct Details: This digital multimeter has all the functions you will need for electronics testing and electrical work. A wide range of functions cover just about every use case.Tests: AC Voltage, DC Voltage, Current, Resistance, Continuity, Diode, TransistorContinuity test has an auditory buzzer, Data hold button locks displayed value, Back-light button illuminates the displayProbes DC Voltage Modes:200mV (100µV resolution)2V (1mV resolution)20V (10mV resolution)200V (100mV resolution)600V (1V resolution) DC Current Modes:200µA (0.1µA resolution)2mA (1µA resolution)20mA (10µA resolution)200mA (100µA resolution)10A (10mA resolution) AC Voltage Modes:200V (100mV resolution)600V (1V resolution) Continuity Test:If continuity exists a built in buzzer will sound Diode Test:Show the approximate forward voltage drop of the diode Resistance Test:200Ω (0.1Ω resolution)2kΩ (1Ω resolution)20kΩ (10Ω resolution)200kΩ (100Ω resolution)2mΩ (1kΩ resolution) Transistor hFE Test:NPN & PNP 0-1000 3V 10µA Additional Features:Data hold button locks displayed valueBack-light button illuminates the displayKickstand 9V Battery – Not Included Package Includes:MultimeterProbe CablesInstruction ManualOn Dec-23-21 at 17:17:11 PST, seller added the following information:
MF-110A Pocket Mini Multimeter Analog AC/DC Voltmeter Ammeter Ohmmeter Tester US
DescriptionItem Description:DC Voltage: 10V / 50V / 250V / 1000VDisplay Type: Pointer DisplayStyle: Pointer-typeOperating Mode: HandheldDC Current: 0.5mA / 50mA / 500mAAC Voltage: 10V / 50V / 250V / 1000VMaterial: ABSProduct Name: Analog Pointer Multimeters Testing InstrumentFeatures: – The regulation is simple and convenient, the workmanship is exquisite, and the measurement is accurate.- The scale is accurate, the dial is clear, the gear is accurate, and the sense of pause between gears is strong.- Pocket multimeter, with multiple measurement functions, full range protection and high safety performance.- The test pen is made of wire, which is not easy to break and can be used for a long time.- Suitable for machine maintenance, communication, power, circuit equipment maintenance, colleges and universities student experiment, etc.- Especially suitable for e-learning classes, amateur radio experiment of primary school students.- Made of engineering plastics, is light in whole, small in size and convenient to carry.- Multiple protection. Adopt overvoltage, overcurrent Self Fusing protection circuit, meter overload protection, etc.Product Model: MF-110ARange Display: Mechanical Pointer NeedlePerformance Mode: Manual RangeProtective Design: Insulating MaterialPower Supply: 1 x AA Battery(Not Included)Points for Attention1.Before measurement, check whether the position of the range selection knob is correct.2.If the current or voltage to be measured is unknown, set the measuring range to the highest gear, and conduct the measurement after correct measurement and selection.3.The maximum DC current range is 250(500)mA, and the maximum voltage range is 500(1000)V.Measurement Steps1.First check whether the pointer is on the zero indexing line, otherwise turn the zero adjuster for adjustment.2.DC Current (DCA)(1)Insert the red plug of the test rod into the instrument “+” and the black plug into the instrument “-“.(2)Set the measuring range to the highest gear of the current measuring range.(3)Contact the probe of the test rod with the circuit to be tested and connect it in series with the circuit to be tested.(4)Read the indicated value from the second scale (mAV) of the dial.(5)If the reading on the scale is too small, turn down 1 gear until the best indication is obtained.3.DC / AC Voltage (DCV, ACV)(1)Set the range selection to the maximum limit of voltage.(2)Connect the probe of the test rod across the circuit under test (in parallel).(3)Read the indicated value from the second scale. Note that the 10V gear reads the indicated value from the third scale (special for AC 10V).(4)If the reading on the scale is too small, turn down 1 gear until the best indication is obtained.4.Resistance (OHM)(1)Set the measuring range to the corresponding gear.(2)Short circuit the probe of the test rod and adjust the adjustment knob to stop the pointer on the zero ohm dividing line. If the pointer cannot be adjusted to the zero ohm dividing line, the battery is exhausted and needs to be replaced.(3)Read the resistance value from the first scale (OHM) during measurement.(4)Use the test rod probe to measure the resistance of the device under test, which shall be connected in series with the device under test.(5)Note: If the resistance of the circuit is measured, cut off the power supply of the circuit and discharge all capacitors.Place of Application: Battery / Resistance / DC Current Test, Machine Maintenance / Communication / Power / Circuit Equipment MaintenanceNote: The multimeter is a normal product, only for simple measurements.Package Including:Package Including: 1 x MF-110A AC/DC Analog Multimeter((Not Included Battery)2 x Test Pen Product Weight: 80 G / 2.82 OuncesProduct Dimensions (L*W*H): 95*75*25 MM / 3.74*2.95*0.98 InchesPackage Weight: 83.0 G / 2.93 OuncesPackage Dimensions (L*W*H): 100*80*27 MM / 3.94*3.15*1.06 InchesRetail Packaging: No, No Packing Attention1.Payments are expected within 7 days after the auction ends. Otherwise unpaid item complaints will be filed by eBay for not receiving payment.2.When put the order in the awaiting payment,Payment must be paied within 20days.3.Shipping and Handling will depends on country location, item weight and attribute.Shipping Details1. Item will be shipped within 48 hours after payment received, excluding weekends and holidays.2. We only ship to eBay confirmed address. 3. We ship worldwide via Regular Airmail. Normally the shipment to worldwide takes 10 to 35 business days, excluding weekends and holidays.4. Shipping are not available for PO BOX, Parcel locker, Parcel collect Retrun 1. Please contact us to request a return and provide your purchasing information that had been sent at the time of purchase 2. Returns must be made within 30 days from the date of purchase.
Fluke i30 AC/DC Current Clamp – Tested Working – G/VG
Good/very good condition. Tested and working. Comes with 2 brand new batteries along with a battery inside.
Multimeter Ohmmeter Voltmeter Digital Display Auto Range Test Volt Tester AC DC
Product Feature ✨ NCV Measurement: the gear position is adjusted to the NCV, when the non-contact voltage sensing area is close to the circuit to detect the AC voltage, the clamp meter will display the buzzer alarm sound of different frequencies according to the detected voltage intensity. ✨ Automatic Identification: Intelligent recognition, simple and easy to use, the test pen touches the zero fire line, and the value is displayed immediately ✨ Flashlight Lighting: The product comes with a flashlight function, which is convenient for working in the dark ✨ True RMS Measurement: The measurement result is the real effective value of the real-time waveform, and the AC arbitrary waveform can be measured ✨ Portable Design: The instrument is equipped with a pen device on the back for easy storage and carrying, and has a hook hole for easy instrument placement and measurement. Note 🔔Used to measure voltage and resistance, does not support measuring current and capacitance. Product Specification Measurement Method Automatic NCV Measurement Support True RMS Support Number of Counts 5999 Flashlight Lighting Support Low Battery Display Support Model Design Portable with Large Screen AC Voltage Range 0.9V~600V DC Voltage Range 0.9V~600V Resistance Range 10Ω-60MΩ Analog Strip 21 Segments Sampling Rate 3 Seconds each time Weight 170g Size 148 x 76 x 19mm Power By 1x AAA Battery(Not include) Package Included 🎁1 x Multimeter 🎁1 x User Manual 🎁1 x Test Lead Location Descriptions To improve your buying experience and ensure fast delivery, Your order will be shipped from the warehouse located in either new jersey or california that is closest to your address. If you have any questions, Please contact us. Thank you for your support !