MF-110A Pocket Mini Multimeter Analog AC/DC Voltmeter Ammeter Ohmmeter Tester US
DescriptionItem Description:DC Voltage: 10V / 50V / 250V / 1000VDisplay Type: Pointer DisplayStyle: Pointer-typeOperating Mode: HandheldDC Current: 0.5mA / 50mA / 500mAAC Voltage: 10V / 50V / 250V / 1000VMaterial: ABSProduct Name: Analog Pointer Multimeters Testing InstrumentFeatures: – The regulation is simple and convenient, the workmanship is exquisite, and the measurement is accurate.- The scale is accurate, the dial is clear, the gear is accurate, and the sense of pause between gears is strong.- Pocket multimeter, with multiple measurement functions, full range protection and high safety performance.- The test pen is made of wire, which is not easy to break and can be used for a long time.- Suitable for machine maintenance, communication, power, circuit equipment maintenance, colleges and universities student experiment, etc.- Especially suitable for e-learning classes, amateur radio experiment of primary school students.- Made of engineering plastics, is light in whole, small in size and convenient to carry.- Multiple protection. Adopt overvoltage, overcurrent Self Fusing protection circuit, meter overload protection, etc.Product Model: MF-110ARange Display: Mechanical Pointer NeedlePerformance Mode: Manual RangeProtective Design: Insulating MaterialPower Supply: 1 x AA Battery(Not Included)Points for Attention1.Before measurement, check whether the position of the range selection knob is correct.2.If the current or voltage to be measured is unknown, set the measuring range to the highest gear, and conduct the measurement after correct measurement and selection.3.The maximum DC current range is 250(500)mA, and the maximum voltage range is 500(1000)V.Measurement Steps1.First check whether the pointer is on the zero indexing line, otherwise turn the zero adjuster for adjustment.2.DC Current (DCA)(1)Insert the red plug of the test rod into the instrument “+” and the black plug into the instrument “-“.(2)Set the measuring range to the highest gear of the current measuring range.(3)Contact the probe of the test rod with the circuit to be tested and connect it in series with the circuit to be tested.(4)Read the indicated value from the second scale (mAV) of the dial.(5)If the reading on the scale is too small, turn down 1 gear until the best indication is obtained.3.DC / AC Voltage (DCV, ACV)(1)Set the range selection to the maximum limit of voltage.(2)Connect the probe of the test rod across the circuit under test (in parallel).(3)Read the indicated value from the second scale. Note that the 10V gear reads the indicated value from the third scale (special for AC 10V).(4)If the reading on the scale is too small, turn down 1 gear until the best indication is obtained.4.Resistance (OHM)(1)Set the measuring range to the corresponding gear.(2)Short circuit the probe of the test rod and adjust the adjustment knob to stop the pointer on the zero ohm dividing line. If the pointer cannot be adjusted to the zero ohm dividing line, the battery is exhausted and needs to be replaced.(3)Read the resistance value from the first scale (OHM) during measurement.(4)Use the test rod probe to measure the resistance of the device under test, which shall be connected in series with the device under test.(5)Note: If the resistance of the circuit is measured, cut off the power supply of the circuit and discharge all capacitors.Place of Application: Battery / Resistance / DC Current Test, Machine Maintenance / Communication / Power / Circuit Equipment MaintenanceNote: The multimeter is a normal product, only for simple measurements.Package Including:Package Including: 1 x MF-110A AC/DC Analog Multimeter((Not Included Battery)2 x Test Pen Product Weight: 80 G / 2.82 OuncesProduct Dimensions (L*W*H): 95*75*25 MM / 3.74*2.95*0.98 InchesPackage Weight: 83.0 G / 2.93 OuncesPackage Dimensions (L*W*H): 100*80*27 MM / 3.94*3.15*1.06 InchesRetail Packaging: No, No Packing Attention1.Payments are expected within 7 days after the auction ends. Otherwise unpaid item complaints will be filed by eBay for not receiving payment.2.When put the order in the awaiting payment,Payment must be paied within 20days.3.Shipping and Handling will depends on country location, item weight and attribute.Shipping Details1. Item will be shipped within 48 hours after payment received, excluding weekends and holidays.2. We only ship to eBay confirmed address. 3. We ship worldwide via Regular Airmail. Normally the shipment to worldwide takes 10 to 35 business days, excluding weekends and holidays.4. Shipping are not available for PO BOX, Parcel locker, Parcel collect Retrun 1. Please contact us to request a return and provide your purchasing information that had been sent at the time of purchase 2. Returns must be made within 30 days from the date of purchase.
Digital Multimeter Tester AC DC Volt Ohm Amp Clamp Meter Auto Range LCD Handheld
Its lightweight design also enables one-handed operation, allowing you to hold and operate the device comfortably with one hand while performing tests with the other. mA DC Current Range: 20mA-200mA.
Digital Multimeter, Multimeter with AC DC Voltmeter & Ohm Volt Amp Tester, Multi
๐ข๐๐ฟ ๐ฐ๐ผ๐ฟ๐ฒ ๐ฝ๐๐ฟ๐ฝ๐ผ๐๐ฒ ๐ถ๐ ๐ฐ๐๐๐๐ผ๐บ๐ฒ๐ฟ ๐๐ฎ๐๐ถ๐๐ณ๐ฎ๐ฐ๐๐ถ๐ผ๐ป, ๐ฟ๐ฒ๐ฝ๐น๐ฎ๐ฐ๐ฒ๐บ๐ฒ๐ป๐ ๐ถ๐ ๐๐ถ๐๐ต๐ถ๐ป ๐ฐ๐ฑ ๐ฑ๐ฎ๐๐, ๐ฎ๐ป๐ ๐พ๐๐ฒ๐๐๐ถ๐ผ๐ป๐ ๐ฝ๐น๐ฒ๐ฎ๐๐ฒ ๐ฐ๐ผ๐ป๐๐ฎ๐ฐ๐ ๐ถ. Built-in a backlight LCD display for clear and intuitive reading, electric tester tool, support very easily read and record under dark areas.
Digital Multimeter Voltmeter AC DC Volt Meter Ohmmeter Auto Range Tester Light M
Resistance Range 10ฮฉ-60Mฮฉ. ๐1 x Test Lead. Flashlight Lighting Support.
Digital Multimeter Tester AC DC Volt Ohm Amp Clamp Meter Auto Range Handheld T1
Interrupting the circuit. To turn it on again, simply rotate the range switch or press the button. – Range Selection ๏ผautomatic. – Over Range Indication๏ผ Display “OL”. – 1 Pair Quality Probe Lead. battery should be replaced.
Auto Ranging Digital Multimeter TRMS 6000 AC/DC Volt Amp Ohm Diode Test Leads
2x Test Leads. Unit Count 1.0 Count. Open the back cover and remove the screw. Reattach the battery cover and screw. Part Number 43180-66526. Power Source Battery Powered. TO YOUR PERFECT.