DC 6V 2A 20N 10mm Pull Push Type Open Frame Linear Motion Solenoid Electromagnet
◆If there are no special circumstances, your product will not be delayed in arrival.
DC 12V 15N 10mm Push Pull Genre Open Frame Linear Motion Solenoid Electromagnet
Description:Push pull Type, linear motion, plunger spring return, DC solenoid electromagnet.Support DC 12V voltage, high power, pull push type, linear motion, is easy to install.DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility, household appliance, mechanical, etc. Note:Please pay attention:As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds.If the operate time is too long,the electromagnet temperature will rise.Too high temperature can affect the life of the electromagnet.Please take the electromagnet put down gently when you install it. The screw thread can make a corresponding change according to your demand.
DC 6V 2A 20N 10mm Pull Push Type Open Frame Linear Motion Solenoid Electromagnet
Description:Push pull Type, linear motion, plunger spring return, DC solenoid electromagnet.Support DC 6V voltage, high power, pull push type, linear motion, is easy to install.DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility, household appliance, mechanical, etc. Specification:Material :MetalForce: 20N;Travel: 10mmCable Length: 190mm / 7.48″;Rated Voltage: DC 6V;Current: 2APush Bar Dia: 7.3mm / 0.29″;Total Length: 55mm / 2.17″;Mounting Hole Dia.: 2.6mm / 0.1″Size: 26 x 22 x 25mm / 1.02″ x 0.87″ x 0.98″ (L*W*H)Package Content: 1 x DC Solenoid ElectromagnetNote:Please pay attention:As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds.
DC 12V 300mA 3.6W 4N 10mm,Pull,Push Type Linear Motion Electromagnet Solenoid
Description:1.Push pull Type, linear motion, plunger spring return, DC solenoid electromagnet.2.Support DC 12V voltage, high power, pull push type, linear motion, is easy to install.3.DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility, household appliance, mechanical, etc.Specification:Material :MetalForce: 4N;Travel: 10mmRated Voltage: DC 12V ;Current: 300mA;Power: 3.6W;Cable Length: 190mm/7.48″;Total Length: 47mm/1.85″;Push Bar Dia: 6mm/0.24″;Mounting Hole Dia.: M3Size: 20 x 13 x 16mm/0.79″ x 0.51″ x 0.63″(L*W*H)Package Content: 1 x DC Electromagnet SolenoidNote:Please pay attention:As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds.
DC 12V 300mA 5N Push Pull Type Open Frame Linear Motion Solenoid Electromagnet
Description:Push Pull Type, linear motion, plunger spring return, DC solenoid electromagnet.Support DC 12V voltage, high power, pull push type, linear motion, is easy to install.DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility, household appliance, mechanical, etc. Specification:Material :MetalForce: 5N;Travel: 10mmCable Length: 190mm / 7.48″;Rated Voltage: DC 12V;Current: 300mAPush Bar Dia: 6.2mm / 0.24″;Total Length: 58mm / 2.28″;Mounting Hole Dia.: 2.6mm / 0.1″Size: 30 x 14 x 17mm / 1.18″ x 0.55″ x 0.67″ (L*W*H)Package Content: 1 x DC Solenoid ElectromagnetNote:Please pay attention:As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.
DC 12V 300mA 8.4W 6N 10mm,Pull,Push Type Linear Motion Electromagnet Solenoid
Description:1.Push pull Type, linear motion, plunger spring return, DC solenoid electromagnet.2.Support DC 12V voltage, high power, pull push type, linear motion, is easy to install.3.DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility, household appliance, mechanical, etc.Specification:Material :MetalForce: 6N;Travel: 10mmRated Voltage: DC 12V ;Current: 300mA;Power: 8.4W;Cable Length: 190mm/7.48″;Total Length: 57mm/2.24″;Push Bar Dia: 7mm/0.28″;Mounting Hole Dia.: M3Size: 30 x 16 x 19mm/1.18″ x 0.63″ x 0.75″(L*W*H)Package Content: 1 x DC Electromagnet SolenoidNote:Please pay attention:As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds.