Marine Grade Teflon Impregnated Hydraulic Grease For Trim And Tilt Units
Five Star Marine Teflon Impregnated Hydraulic Grease is the best grease for Marine Hydraulics, it’s primarily Silicone Grease Impregnated with Teflon. We choose this formulation for a list of reasons, Silcone is a water proofing agent and does very well in the salt water environment where other greases shed off and dry our and cake up silicone will stay for a long time and help moisturize seals and protect them from UVs and dry rot. We choose teflon as a perfect additive because of its natural lubercating value and its resistance to salt and the UVs. Teflon has not been around long enough for scientists to know its actual shelf life is unknown because it was only discovered in 1938 by an American Scientist working for Dupont. Teflon is by far my favorite material for hydraulics for its heat resistance and chemical resistance as well as resistance to the sun and salt. For the most critical applications teflon is king. This grease can also be used in place of Dielectric grease as it is the same other than the Teflon which makes a very big difference for lubricity and sustainability in UVs. You should always keep Teflon Silicone Grease on your trim and tilt unit and steering rams as well as your power polls and or jack plate. This material is is hydro-phobic and will keep marine lift from calcifying and latching onto the substrate of the rams and seals.
Marine Grade Anti-sieze Moly Paste FSM153 MIL-PRF-83483 47104 550
Five Star Marine Anti-Sieze Is Specifically Formulated For The Marine Environment We Utilize A Very High Molybdenum Content In Our Formula To Ensure Bolts & Parts Come Apart With Ease Despite What Mother Nature Has Thrown At It. Molybdenum is the best all around Anti-Sieze compound for extremely high stress mechanical applications as well as Corrosion Resistance and Natural lubrication for Nuts and Bolts and Matting Surfaces. Moly Grease is used in everything from CV Joints, to Oil Rigs to almost every industrial application this special material has a role in keeping the wheels turning. Molybdenum in its raw state is a natural lubricant that has very high heat and corrosion resistance as well as good environmental stability for a long lasting service life. It can be used on Marine Hydraulics as well as steering cables and wheel bearings and nuts and bolts. This Moly Paste will help separate dissimilar metals preventing corrosion and will allow nuts and bolts to separate with the compound acting as a solid lubricant that can withstand temperates upwards to 2000 Degrees. Hands Down For Marine Applications You won’t Find a better Anti-Sieze